基于改进粒子群优化算法的火电厂机组负荷分配

以坑口电厂SIS系统机组负荷优化分配功能模块为应用背景,针对基本粒子群优化算法易陷入局部收敛、收敛速度慢的缺点,提出一种基于惯性权重非线性减小策略的改进粒子群优化算法。并且通过MATLAB与Visual C++混合编程,开发了机组负荷在线优化分配功能模块,提高了算法的计算效率和工程应用价值。     

基于改进DPSO算法的并行测试任务优化调度研究

并行测试以减少测试时间和降低测试成本的强大优势,已成为当前自动测试系统发展的方向。针对并行自动测试过程中,测试任务调度复杂,难以优化的问题,以PSO算法为基础,通过对问题空间编码的重新定义,并运用交叉、变异算子给出了新的粒子位置的更新公式,提出了一种改进后的DPSO算法。依据并行测试完成时间极限定理,给出了并行测试任务调度的目标函数与约束条件。以某雷达电子装备并行测试系统中三块电路板并行测试为例,对改进的DPSO算法进行了仿真验证,得到了最优调度测试序列。结果表明：与遗传算法相比,改进后的DPSO算法迭代次数更少,寻优性能更好,适用于工程应用。     

Elongation method with intermediate mechanical and electrostatic embedding for geometry optimizations of polymers

The elongation method with intermediate mechanical and electrostatic embedding (ELG-IMEE) is proposed. The electrostatic embedding uses atomic charges generated by a charge sensitivity analysis (CSA) method and parameterized for three different population analyses, namely, the Merz–Singh–Kollman scheme, the charge model 5, and the atomic polar tensor. The obtained CSA models were tested on two model systems. Test calculations show that the electrostatic embedding provides several times of decrease in the difference of energies of testing and reference calculations in comparison with the conventional elongation approach (ELG). The mechanical embedding is implemented in a combination of the conventional elongation method and the ONIOM approach. Moreover, it was demonstrated that the geometry optimization with the ELG-IMEE reduces the errors in the optimized structures by about one order in root-mean-square deviation, when compared to ELG.     

Is it worthwhile to go beyond the local-density approximation in subsystem density functional theory?

Frozen density embedding (FDE) theory is one of the major techniques aiming to bring modeling of extended chemical systems into the realm of high accuracy calculations. To improve its accuracy it is of interest to develop kinetic energy density functional approximations specifically for FDE applications. In the study reported here we focused on optimizing parameters of a generalized gradient approximation-like kinetic energy functional with the purpose of better describing electron excitation energies. We found that our optimized parametrizations, named excPBE and excPBE-3 (as these are derived from a Perdew-Burke-Ernzerhof-like parametrization), could not yield improvements over available functionals when applied on a test set of systems designed to probe solvatochromic shifts. Moreover, as several different functionals yielded very similar errors to the simple local-density approximation (LDA), it is questionable whether it is worthwhile to go beyond the LDA in this context.     

Multiobjective Optimization of Fabrication Parameters of Jute Fiber/Polyester Composites with Egg Shell Powder and Nanoclay Filler

In the present study, a model is presented to optimize the fabrication parameters of natural fiber reinforced polyester matrix composites with dual fillers. In particular, jute fiber mat was chosen as reinforcement and eggshell powder (ESP) and montmorillonite nanoclay (NC) were selected as fillers. The weight per square meter (GSM) of the fiber, the weight percentage of ESP and NC have been chosen as independent variables and the influence of these variables on tensile, flexural and impact strength of the composite has been inspected. The permutations of the different combinations of factors are intended to accomplish higher interfacial strength with the lowest possible number of tested specimens. The experiments were designed by the Taguchi strategy and a novel multi-objective optimization technique named COPRAS (COmplex PRoportional ASsessment of alternatives) was used to determine the optimal parameter combinations. Affirmation tests were performed with the optimal parameter settings and the mechanical properties were evaluated and compared. Experimental results show that fiber GSM and eggshell powder content are significant variables that improve mechanical strength, while the nanoclay appears less important.     

基于拟相对内部集值优化问题弱有效元的最优性条件

本文研究了基于拟相对内部的非凸集值优化问题弱有效元的最优性条件.首先,讨论了弱有效元与线性子空间之间的关系,利用涉及拟相对内部的凸集分离定理,获得了弱有效元的最优性条件.其次,给出了基于拟相对内部弱有效元的Lagrange乘子定理.     

基于相场描述的拉压不对称强度结构拓扑优化

运用了基于相场描述的拓扑优化方法,来寻找在拉伸和压缩中表现出不对称强度行为的连续体结构的最优布局。依据Drucker-Prager屈服准则和幂率插值方案,优化问题可以描述为在局部应力约束下的最小化结构的体积。用qp放松法来解决应力约束的奇异性,并采用基于P-norm函数的聚合方法对应力约束进行凝聚,该方法实现了约束个数的降低,同时引入了稳定转化法来处理大量的局部应力约束和高度非线性的应力行为,以修正应力,提高优化收敛的稳定性。在优化问题求解时,使用拉格朗日乘子法对目标函数和应力约束进行处理。利用伴随变量法进行灵敏度分析,并通过求解Allen-Cahn方程更新相场函数设计变量。数值算例证明了该优化模型和相应数值技术的有效性,相关算例还揭示了考虑拉压不同强度和考虑同拉压强度约束时得到的结构优化拓扑构型具有显著的差异。     

基于三线性分灾模型的结构多目标抗震优化设计

基于分灾抗震设计概念,发展了基于三线性分灾模型的结构多目标优化设计方法。以防屈曲支撑为分灾构件的框架结构为例,针对分灾构件设计参数,采用多目标遗传算法进行分灾结构多目标优化设计。最终得到了分灾框架结构分灾构件用量和层间位移角等重要特性的多目标优化关系,并进行了相关讨论。结果表明,结构多目标分灾优化模型可以综合考虑结构造价和抗震性能等,并可以根据目标偏好有效地满足设计需求;分灾构件对抗震性能的作用随着震级增大而增强,使用分灾构件的结构能够更好地抵御强震的作用。     

Multi-Objective Optimization of Braun-Type Exothermic Reactor for Ammonia Synthesis

The exothermic reactor for ammonia synthesis is a primary device determining the performance of the energy storage system. The Braun-type ammonia synthesis reactor is used as the exothermic reactor to improve the heat release rate. Due to the entirely different usage scenarios and design objectives, its parameters need to be redesigned and optimized. Based on finite-time thermodynamics, a one-dimensional model is established to analyze the effects of inlet gas molar flow rate, hydrogen–nitrogen ratio, reactor length and inlet temperature on the total entropy generation rate and the total exothermic rate of the reactor. It’s found that the total exothermic rate mainly depends on the inlet molar flow rate. Furthermore, considering the minimum total entropy generation rate and maximum total exothermic rate, the NSGA-II algorithm is applied to optimize seven reactor parameters including the inlet molar flow rate, lengths and temperatures of the three reactors. Lastly, the optimized reactor is obtained from the Pareto front using three fuzzy decision methods and deviation index. Compared with the reference reactor, the total exothermic rate of the optimized reactor is improved by 12.6% while the total entropy generation rate is reduced by 3.4%. The results in this paper can provide some guidance for the optimal design and application of exothermic reactors in practical engineering.