Preparation of apolar glass capillary columns by the barium carbonate procedure

As an extension of previous reports, the barium carbonate procedure has been optimized in detail for the preparation of apolar columns. The aim was to produce optimum overall column characteristics, and to maintain them unchanged under the prolonged influence of the highest possible temperature. The main parameters under optimization were glass variety, leaching of glass surface with aqueous HCl, and amount of barium carbonate deposited, while deactivation and coating were kept constant. The basic column characteristics were adsorption properties and thermostability of deactivation, acid/base behaviour and separation efficiency. They were determined by a new, quantitative testing procedure. Intense leaching was able to eliminate almost totally the differences between glass varieties and to create a well-defined glass surface. While untreated glass, leached glass, and barium carbonate treated glass showed specific weak points in the respective column quality, the combination of leaching and barium carbonate treatment yielded the highest and most stable quality. Some technical modifications of the preparation procedure are described, including deactivation in the gas phase, and use of pentane as a solvent for static coating.     

Hydrogenation of ethyl esters of 4-phenyl-and (2-furyl)-substituted 2,4-dioxobutyric acids at palladium black

The hydrogenation of ethyl 4-R-2,4-dioxobutyrates (R = phenyl, 2-furyl) at 5% Pt/Al₂O₃ catalyst, modified with cinchonidine, and at palladium black was investigated. The former had low activity under the conditions we tested. The main products during the hydrogenation of these compounds at palladium black are ethyl 4-R-2-hydroxy-4-oxobutyrates. The yield of the phenyl derivative amounts to 68.5%, while the yield of the corresponding 2-furyl derivative amounts to 97%. In the last case ethyl 2-hydroxy-4-oxo-4-(2-tetrahydrofuryl)butyrate was detected as impurity. The optimum conditions for the formation of ethyl 2-hydroxy-4-phenylbutyrate (yield 88.2%) were determined. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 5, pp. 655–659, May, 2006.     

Protection of immobilized sulfhydryl groups against autooxidation by alterations in their microenvironment

Immobilized sulfhydryl groups were prepared by partial thiolation of NH₂-glass beads. The microenvironment of the immobilized SH groups was varied by different chemical modifications of neighboring NH₂ groups. Introduction of a strong charge in the surroundings of immobilized sulfhydryls results in their dramatic stabilization against autooxidation. This effect is due to the salting of O₂ from the surface microlayer of the thiolated beads.     

New aspects of thermal analysis,Part I. Resolution of DSC and means for its optimization

The definitions of the temperature resolution, the so-called resolution of DSC instruments given in literature are discussed. A new definition of the resolution for DSC instruments is presented and outlined. The main characteristic introduced in this new definition is a minimum between two caloric events as a prerequisite of an existing resolution. Possible candidates of test substances have been evaluated. The oligomer n-hexatriacontane is revealing an interesting phenomenon, namely a lambda transition which is in the peak temperature only 2 K lower than the melting temperature of 76°C. The substance was selected as an ideal test substance for the quantification of the resolution of DSC instruments. The lambda transition is a second order process which may reach under certain conditions the saturation of the occurring molecular dislocation within 0.2 K, and after saturation the heat flow rate drops sharply down. Investigations concerning the main characteristics of n-hexatriacontane in respect to the temperatures of transition (lambda transition and melting), to the involved enthalpies, and to the resolution factors were performed as functions of the sample mass and the heating rate. The importance of relevant evaluation procedures increasing the resolution factors of DSC curves are discussed and these procedures are integrated into the testing of the resolution. The necessity for widening the experimental scope from instruments to evaluation procedures is forced by the existence of instruments with built-in signal treatments based on electronic devices and software procedures. A comparison with literature data is outlined for all of the mentioned characteristic values of n-hexatriacontane. This revised version was published online in August 2006 with corrections to the Cover Date.     

Concentrated electrolyte solutions at high temperatures and pressures

A survey is given of recent experimental results obtained from high-temperature, high-pressure investigations with water, aqueous solutions, and ionic fluids. Data on the static dielectric constant of water to 550°C and 5 kbar are given and discussed with respect to their relation to water structure. Infrared and Raman spectra of HDO in pure water have been obtained to 400°C and 4 kbar, which give information on hydrogen bonding. Xe–H₂O and CO₂–H₂O mixtures were investigated in the infrared. Ni(II) and Cu(II) complexes were investigated by absorption spectroscopy in aqueous solutions of high chloride content to 350°C and 2–6 kbar. The gas-liquid critical point of ammonium chloride was found at 880°C and 1635 bars. This fluid appears to be predominantly ionic even in the critical region. The possibility of converting pure polar fluids such as ammonia and water into concentrated ionic solutions by self-ionization at very high pressures is mentioned.This paper was presented at the symposium, The Physical Chemistry of Aqueous Systems, held at the University of Pittsburgh, Pittsburgh, Pennsylvania, June 12–14, 1972, in honor of the 70th birthday of Professor H. S. Frank.     

Electrochemical formation and clevage of bis-imidazolyls

Bis-(2,4,5-triphenylimidazolyls) result from the dimerization of 2,4,5-triphenylimidazolyls and from the nucleophilic attack of 2,4,5-triphenylimidazole anions upon 2,4,5-triphenylimidazolylium cations. The isomeric bis-imidazolyls consist of imidazole and isoimidazole systems. Imidazoles undergo only anodic oxidation, isoimidazoles only cathodic reduction. Therefore the bis-imidazolyls may be analyzed from their electrochemical behaviour. Bis-(2,4,5-triphenylimidazolyl)-1,2′ and bis-(2,4,5-triphenylimidazolyl)-1,4′ undergo reductive bond cleavage in an ē.c?.ē. mechanism from which 2,4,5-triphenyl-imidazole anions result. The electrochemical properties of one of the bis-imidazolyls agree with that of 1,4,5-triphenyl-2-(2,4,5-triphenylisoimidazolyl-4)-imidazole and not with that of bis-(2,4,5-triphenylimidazolyl)-2,4′ as reported in literature.     

Ground-state energy of a quantum chain with competing interactions

We show rigorously that the ground state of a quantum chain with competing ferromagnetic nearest and antiferromagnetic next nearest interactions undergoes a transition from ferromagnetic to helical type, in the isotropic case, for a certain value of the relevant ratio of coupling constants. Boundaries of the phase diagram are also determined in the anisotropic case. The stability of a special quantum state (corresponding to a classical modulated phase of =/3) is analyzed by an extension of Holstein-Primakoff arguments, along a line of constant ratio of couplings, showing in particular a sequence of (instability) gaps. Finally, a natural adaptation of a variational wave function due to Huse and Elser is used to study several portions of the phase diagram, with very good agreement with previous theoretical results.     

Crystal and molecular structure of 6-0-acetylgrayanotoxin III

The crystal and molecular structure of a grayanotoxin III derivative, 6-0-acetylgrayanotoxin III is presented. The crystal is orthorhombic, space group P2₁2₁2₁, witha=15.582(3),b=21.304(3),c=6.339(3)Å,V=2104(1) ų Z=4. The structure was solved by direct methods and refined by full matrix least-squares methods to a finalR=0.047 for 1763 independent reflections withF ₀>3 (F ₀) The molecule is based on a tetracyclic structure consisting of two five-membered, one six-membered, and one seven-membered ring with various conformations.     

An Electrostatic Bond Energy Model for Enthalpies of Formation of Chloroalkanes in Gaseous States

An electrostatic bond energy model is formulated to fit the enthalpies of formation and dipole moments of the alkanes and chloroalkanes. In this model, the charge distributions are calculated by an electrostatic approach similar to the "MSE" method, and the enthalpy of formation of a molecule is the sum of the bond energy terms plus the electrostatic energy of the interactions between the charges on all atoms. All parameters of this model are obtained by parameterization. The calculated dipole moments for 13 chloroalkanes and enthalpies of formation for 19 alkanes and non-geminal chloroalkanes agree with the determined values very well. To calculate the enthalpies of formation of geminal chloroalkanes, a correction mainly attributed to the van der Waals interactions in the geminal substituted group, about 24 kJ/mol per pair of geminal chlorine atoms, is introduced.