On-line preconcentration and determination of Au(III) in various environmental/industrial samples by flame atomic absorption spectrometry

A rapid and simple on-line method is described for the determination of Au(III) in various samples. The method is based on the sorption of gold(III) on Lewatit MonoPlus TP207 chelating resin including the iminodiacetate group, which is used as sorbent material and packed in a minicolumn. The chemical variables such as the pH of the sample solution, eluent type, interfering ions and concentrations of reagents, and instrumental variables such as sample loading volume, reagents flow rates, and tubing length, which affect the efficiency of the method were studied and optimised. Au(III) was sorbed on the chelating resin, from which it could be eluted with 3 mol L^?1 HCl, and then introduced directly to the nebuliser-burner system of FAAS. The limit of detection of the method was 0.2 µg L^?1 while the relative standard deviation was <4.0% for 20 µg L^?1 Au(III) concentration. The preconcentration factor was found to be 106 while the optimised sample volume was 15.3 mL. The accuracy of the method was verified by analysing the certified reference material. The developed method was applied successfully for the determination of gold in different samples with satisfactory results.     

AFS–3100原子荧光光度计联机异常故障排除

介绍了北京海光仪器公司生产的AFS–3100原子荧光光度计在使用过程中仪器与电脑通讯失败的故障原因及排除方法。     

Highly sensitive ion preconcentration method based on flow sorbent extraction using multiwall carbon nanotubes

In this work a solid phase on-line uranium ion preconcentration system coupled with spectrophotometry has been developed. The method is based on uranyl ion preconcentration at pH 3.75 onto multiwall carbon nanotubes treated with HNO₃. After preconcentration, the uranyl ions are eluted with 0.32?mol?L^?1HCl followed by reaction with 3,6-bis[(2-arsonophenyl)-azo]-4,5-dihydroxy-2,7-naphthalendisulfonic acid 0.08%[w/v] (Arsenazo III), which had maximum monitored absorbance of 650?nm. Effects of the pertinent experimental parameters on the system were investigated by means of 2^6?2 fractional factorial design, while optimization was carried out using the Doehlert matrix. Under optimized conditions, detection and quantification limits were found to be 0.21 and 0.7?µg?L^?1, respectively. The analytical curve ranged from 5 to 150?µg?L^?1 (r?=?0.998), while the relative standard deviations (RSD) were 3.27 and 2.56% for the respective uranium concentrations of 10 and 100?µg?L^?1 (n?=?10). The features obtained for the on-line preconcentration system were: preconcentration factor of 228, concentration efficiency of 57?min^?1, consumption index of 0.13?mL and sample throughput of 15?h^?1. In order to assess the accuracy of the proposed method, addition and recovery studies were carried out on spring water samples from different sources and synthetic seawater with satisfactory results ranging from 94.85 up to 103.65%.     

聚(2-甲基-2-噁唑啉)在毛细管电泳分离蛋白质中的应用

毛细管电泳作为一种常见的液相分离技术,因其分析速度快、分离效率高、样品消耗量少等特点,在蛋白质分离分析领域有广泛应用。然而,常用的熔融硅毛细管容易吸附蛋白质,导致电渗流不稳定,分离结果重现性变差;此外,商用毛细管电泳中常用的紫外检测器由于光程短,使得毛细管电泳的检测灵敏度往往不能达到低丰度蛋白质的直接分析要求。因此寻找能够阻止蛋白质吸附、同时能够提高检测灵敏度的涂层是毛细管电泳分离分析蛋白质的重要课题之一。聚（2-甲基-2-噁唑啉）（PMOXA）作为一种类肽类亲水性聚合物,具有与抗蛋白质吸附聚合物聚乙二醇类似的亲水性、抗蛋白质吸附性和生物相容性,而且其类肽结构使之具有较聚乙二醇更好的稳定性,因此近年来在生物质传递、药物载体和阻抗蛋白质吸附等领域得到越来越多的应用。该文主要从两个方面对聚（2-甲基-2-噁唑啉）在毛细管电泳中的应用进行了阐述。一是利用多巴胺作为黏合层将其涂覆在毛细管内壁作为抗蛋白质吸附涂层,这种涂层不仅能成功分离多种蛋白质的混合物（如溶菌酶、细胞色素C、核糖核酸酶A和α-胰凝乳蛋白酶原A）,而且在定量检测奶粉中三聚氰胺、乳铁蛋白的过程中,能阻抗其他蛋白质的非特异性吸附,提高了毛细管电泳对奶粉中三聚氰胺、乳铁蛋白的检测效率。二是将其与具有刺激响应性的聚合物（如聚丙烯酸）构成二元混合刷涂层,在一定的pH和离子强度条件下,涂层可吸附目标蛋白质（如牛血清白蛋白、溶菌酶）,在另一pH和离子强度条件下可将吸附的目标蛋白质全部释放,同时在释放过程中,处于涂层表面的聚（2-甲基-2-噁唑啉）会进一步阻止蛋白质的吸附,释放的蛋白质在电渗流和电泳的双重作用下快速迁移,到达检测器的蛋白质瞬时浓度大大增加,使目标蛋白质得到富集,目标蛋白质的检测信号得到放大,从而达到了提高低丰度蛋白质检测灵敏度的目的。此外,该文还对聚（2-甲基-2-噁唑啉）在毛细管电泳分离蛋白质中的未来发展趋势进行了展望。     

在线固相萃取和高效液相色谱法测定卷烟主流烟气中几种芳胺

研究了用在线固相萃取富集和高效液相色谱法测定卷烟主流烟气中的几种芳胺(苯胺、对甲基苯胺、2,4-二甲基苯胺、1-萘胺、2-萘胺和4-氨基联苯)的方法,样品中的芳胺用邻甲氧基酚衍生生成偶氮染料,偶氮染料用WatersXterraTMRP18色谱柱在线固相萃取富集,然后以WatersXterraTMRP18色谱柱为固定相,75%的甲醇(内含0.01mol/LpH=8的四氢吡咯-醋酸缓冲液)为流动相分离,二极管矩阵检测器检测;苯胺、对甲基苯胺、2,4-二甲基苯胺、4-氨基联苯、1-萘胺、2-萘胺的检出限分别为005、0.08、0.08、0.06、0.03和0.03μg/L。几种芳胺的相对标准偏差在2.2%~3.4%之间;标准回收率在89%~106%之间,方法用于卷烟主流烟气中几种芳胺的测定,结果令人满意。     

一种大视场相位测量轮廓术系统标定方法

在进行大视场相位测量轮廓术系统参量标定时需要大的标定平面和精密移动台,由于携带不方便,不易进行现场标定。提出了一种用于相位测量轮廓术系统参量的高精度、现场标定方法,采用一块较小的平面标定靶在有效测量体积内不同位置多次摆放,以获取密集的数据点。先标定出摄像机的内参量和外参量,再指定一个全局参考平面和若干辅助参考平面,然后在图像平面上分区计算出每个位置标定靶上每点相对辅助参考平面的高度差和相位差,最后应用极大似然估计法估计出相位高度映射参量。实验中平面高度测量的标准偏差达到0.0433 mm。这种方法只需要较小的平面标定靶,标定过程方便、精度高,完全适合大视场三维测量相位测量轮廓术系统现场标定要求。     

在线凝胶渗透色谱-气相色谱/质谱法检测茶叶中的153种农药残留

建立了在线凝胶渗透色谱-气相色谱/质谱(GPC-GC/MS)分析茶叶中153种农药残留的方法。样品用乙腈超声提取,提取液经石墨化炭黑固相萃取柱净化后,经GPC-GC/MS在线净化、分离和检测。方法的加标回收率为73.32%～117.05%,相对标准偏差为0.76%～13.18%。方法的检出限和定量限范围分别为0.0003～0.006 mg/kg和0.001～0.02 mg/kg。该方法样品前处理简单、分析时间短,灵敏度和精密度均符合农药多残留检测技术的要求,适用于茶叶中多种农药残留的检测。     

流动注射-分光光度法测定自来水中游离氯的研究

设计了游离氯流动注射自动在线检测仪,并研究了仪器的最佳测试条件.该仪器采用改进的N,N-二乙基-1,4-苯二胺(DPD)比色原理,通过流动注射进样技术,结合光电转化、数字信号处理及自动化控制技术,克服了DPD分光光度法中手工操作的缺陷,实现了样品分析的自动化.结果证明,此系统的试剂用量少、测定范围宽(0.05～6.00...     

微波辅助快速制备核-壳型尿苷印迹聚合物及其在线富集应用研究

采用微波辅助加热,以尿苷为模板分子,丙烯酰胺(AA)为功能单体,乙二醇二甲基丙烯酸酯(EGDMA)为交联剂,快速制备尿苷印迹聚合物,聚合时间大大缩短,仅为传统加热的1/8.采用红外光谱和扫描电镜对印迹聚合物进行表征,结果表明二氧化硅表面成功包覆尿苷印迹壳层;该印迹聚合物颗粒分散均匀,印迹壳层厚度约为100 nm.将该印...