厚翅片管内流体流动和传热的数值分析

本文应用Ｐａｔａｎｋａｒ等人［１］研究薄翅片管的湍流模型，对一种工业化的厚翅片管内的流体流动和传热进行了数值分析。计算范围包括了层流和湍流（Ｒｅ＝１０１～１０６），所得计算结果与较窄范围内实验所测的传热与阻力数据相当符合，本计算结果具有较大的推广价值。     

AD GALERKIN ANALYSIS FOR NONLINEAR PSEUDO—HYPERBOLIC EQUATIONS

AD(Alternating direction)Galerkin schemes for d-dimensional nonlinear pseudo-hyperbolic equations are studied.By using patch approximation technique,AD procedure is realized,and calculation,work is simplified.By using Galerkin approach,highly computational accuracy is kept.By using various priori estimate techniques for differential equations,difficulty coming form non-linearity is treated,and optimal H^1 and L^2 convergence prop-erties are demonstrated.Moreover,although all the existed AD Galerkin schemes using patch approximation are limited to have only one order accuracy in time increment,yet the schemes formulated in this paper have second order accuracy in it.This implies an essential advancement in AD Galerkin aualysis.     

二维刚性边值问题的小波-吉尔解法

本文利用微分方程数值解的离散小波表示，讨论了此类方程在满足一定初始条件和边值条件下，在一个方向上利用小波伽辽金法，另一方向上利用吉尔方法进行求解，提出了一种解二维刚性初，边值问题的小波数值算法，计算结果表明，利用该方法所求得的数值解精度高，而且由小波特有的性质，它特别适用于求解带有奇异摄动的刚性问题。     

溃坝问题的间断有限元方法

本文研究90年代初提出的Runge-Kutta间断Galerkin有限元方法，给出该方法的精度分析，通过经典算例验证该方法处理间断问题、捕捉锐利波形的能力，并将其推广到求解浅水问题．针对坝底无摩擦，无坡度的理想情形进行讨论，给出方溃坝和圆溃坝问题的数值模拟结果．     

晶体微观结构的数值计算

晶体微观结构是晶体材料在特定物理条件下其多个能量极小平衔态在空间形成的某种微尺度的规则分布．几何非线性的连续介质力学理论可以用能量极小化原理来解释晶体微观结构的形成，并用Young测度来刻画平衡态各变体在空间的概率分布．定性的理解与定量地分析和计算晶体材料的微观结构对于发展和改进高级晶体功能材料，如形状记忆合金、铁电体、磁至伸缩材料等，有重要的意义．本文回顾了近年来晶体微观结构数值计算方面的最新进展．介绍了计算晶体微观结构的几种数值方法及有关的数值分析结果。     

结构动力学方程数值积分的三参数算法

本文提出计算结构动力响应的三参数单步数值积分法,它具有无条件稳定性质,并具有合适的算法阻尼.通过分析及与其他数值积分法比较,说明本文算法的精度有所提高.     

A numerical exploration of secondary separation in starting flow around a flat plate by the discrete vortex model

In the present work, a further numerical simulation of the starting flow around a flat plate normal to the direction of motion in a uniform fluid has been made by means of the discrete vortex method. The secondary separation occurring at rear surface of the plate is explored, and predicted approximately using Thwait's method. The calculated results show that in the early stages of the flow secondary separation does occur. The evolution of flow field, the vortex growing process and the characteristics of secondary vortices have been described. The time dependent drag coefficients, the vorticity shed from the edges and rear surface, and the separation positions are calculated as well as the distributions of velocity and pressure on the plate. In the case of flow normal to the plate, the calculated secondary vortices are weak. Their existence will change the local velocity distributions and affect pressure distributions. However, the effect on drag coefficient is negligible.     

A fractional order hyperchaotic system derived from Liu system and its circuit realization

In this paper we propose a novel four-dimensional fractional order hyperchaotic system derived from Liu system. Electronics workbench (EWB) and Matlab simulations show the dynamical behavior of the proposed four-dimensional fractional order hyperchaotic system. Finally, after separately using EWB and Matlab, an electronic circuit is designed to realize the novel four-dimensional fractional order hyperchaotic system and the experimental circuit results are obtained which are identical to software simulations.     

大气湍流对天文望远镜光电导行精度的影响

讨论了由大气湍流造成的望远镜导行误差,这一误差将给望远镜光电导行的精度带来较大影响。其中使用单点源目标的导行精度受限于大气相干长度和大气相干时间,而多点源目标及面源的导行精度还与湍流随高度的变化有关。通过分析和仿真(数值模拟)结果表明,现代天文观测必须考虑大气湍流对光电导行精度的影响。通过延长曝光时间可以有效降低湍流大气的影响,同时也降低了光电导行的反馈控制频率。当导行信标为多星或面源则可在一定程度上降低高层大气湍流带来的光电导行误差,从而可以适度减少光电导行曝光时间,提高其反馈控制频率。     

超高数值孔径Schwarzschild投影光刻物镜的光学设计

针对45nm及以下节点光刻相关技术的研究需求,确定了实验型投影光刻物镜的结构型式及设计指标。依据像差理论在非同心小遮拦的Schwarzschild反射系统中添加折射补偿镜组来进一步减小系统的中心遮拦,扩大像方数值孔径。设计了一套小中心遮拦,数值孔径为1.20的Schwarzschild折反式投影光刻物镜。设计结果表明,该投影光刻物镜工作带宽为100pm,像方视场为50μm,线中心遮拦比为13%,光学分辨力为80nm时(6240lp/mm)的系统调制传递函数大于0.45,全视场最大畸变为6.5nm,满足了45nm深紫外(DUV)浸没光刻实验平台对投影光刻物镜的需求。