Absolute Rate Constants for the Addition of the 1‐(tert‐Butoxy)carbonylethyl Radical onto Cyclic Alkenes in Solution

Absolute rate constants are reported for the addition of the 1‐[(tert‐butoxy)carbonyl]ethyl (= 2‐(1,1‐dimethylethoxy)‐1‐methyl‐2‐oxoethyl) radical ^.CHMeCO₂(t‐Bu) to several cyclic and monosubstituted alkenes in MeCN as obtained by time‐resolved electron paramagnetic resonance (EPR). The activation energies for the addition of this alkyl radical are mainly governed by the addition enthalpy but are also substantially lowered by the ambiphilic effect and by relief of cyclic strain.     

Lattice Thermal Transport in the Homogeneous Cage-Like Compounds Cu3VSe4 and Cu3NbSe4: Interplay between Phonon-Phase Space,Anharmonicity, and Atomic Mass

Understanding the correlation between crystal structure and thermal conductivity in semiconductors is very important for designing heat-transport-related devices, such as high-performance thermoelectric materials and heat dissipation in micro-nano-scale devices. In this work, the lattice thermal conductivity ( ) of the cage-like compounds Cu₃VSe₄ and Cu₃NbSe₄ was investigated by experimental measurements and first-principles calculations. The experimental of Cu₃NbSe₄ is approximately 25 % lower than that of Cu₃VSe₄ at 300 K. The relevant important physical parameters, including the sound velocity, heat capacity, weighted phonon phase space (W), and third-order force constants along with atomic mass were theoretically analyzed. It is found that W is the dominant parameter in determining the , and the other factors only play a minor role. The physical origin is the relatively “soft” lattice of Cu₃NbSe₄ with heavier atomic mass. This research provides deep insight into the correlation between the thermal conductivity and crystal structure and paves the way for discovering high-performance thermal management device and thermoelectric materials with intrinsically low .     

Reactions of bis(hexamethylbenzene)iron(0) with carbon monoxide and with unsaturated hydrocarbons

Thermal decomposition of bis(hexamethylbenzene)iron(0) in the presence of carbon monoxide yields a novel carbonyl iron complex, [C₆(CH₃)₆]Fe(CO)₂. The cyclohexadiene complex [C₆(CH₃)₆]Fe(C₆H₈) is obtained from reaction of bis(hexamethylbenzene)iron(0) with either 1,3-cyclohexadiene or benzene, and the yield is much greater in the presence of hydrogen gas. Interaction of bis-(hexamethylbenzene)iron(0) with 2-butyne induces a catalytic cyclotrimerization to give more hexamethylbenzene. Kinetic and isotope distribution studies indicate that the primary step in these reactions is not a direct loss of one ring ligand, but rather an insertion of the iron center into one of the ligand methyl CH bonds, leading to a benzyl hydride complex species. Mechanisms for the subsequent reactions of this iron hydride species are proposed.     

Fuzzy Symmetries for Linear Molecules and their Molecular Orbitals

In this paper, the fuzzy symmetry of some prototypical linear molecules has been analyzed. The results show that some molecular orbitals (MOs) are less symmetrical but some others are more symmetrical than the molecular skeleton, which the MOs correspond to. The membership functions of space inversion for MOs are closely related to the chemical characteristics of the MOs. Sometimes, although the symmetry of a molecular skeleton is not obvious, however that of some MO is quite obvious. The membership functions of the fuzzy inversion symmetry depend on the choice of the position of the center of inversion. As compared to those of diatomic molecules and linear tri-atomic molecules, the linear polyatomic molecules in which a distinctive fuzzy symmetry of space translation may exist, and thus a significant effect on their properties can be expected.     

Application of the essential work of fracture concept to nanostructured polymer materials

The first part of the paper deals with a critical discussion of the methodical basis of essential work of fracture (EWF) concept with respect to the specimen geometry (especially the notch depth) and application to polymers. In the second part, an in situ testing device, which combines a tensile testing machine with an optical strain-field measuring system, has successfully demonstrated possibility of characterization of fracture behaviour of polystyrene-polybutadiene block copolymers and block copolymer/homopolymer blends as examples of nanostructured polymer materials. It has been shown that knowledge of the time evolution of the strain field close to the crack tips leads to a simple verification of the basic precondition for the applicability of the EWF concept, the precondition “plastic zone coalescence-before-stable crack propagation”.     

Synthesis of β-ketoenamine donors having O, N, Se/Te donor functionalities and their reaction chemistry with Pd(II) and Pt(II) metal ions

Monoanionic tridentate ligands LH_a and LH_b containing ONSe and ONTe donor sequences and their Pd²⁺ and Pt²⁺ derivatives were synthesized and characterized. The formation of a five- and a six-membered ring around the central metal atom and associative phenomena in solutions provide extra stability to the metal complexes.     

Quantitative determination of UV filters in sunscreen lotions using microemulsion electrokinetic chromatography

Microemulsion electrokinetic chromatography (MEEKC) has been applied to the separation of some UV filters (Eusolex 4360, Eusolex 6300, Eusolex OCR, Eusolex 2292, Eusolex 6007, Eusolex 9020, Eusolex HMS, Eusolex OS, and Eusolex 232) commonly used in sunscreen lotions. Use of a MEEKC buffer with a mixed surfactant system to stabilize the oil droplets and an organic modifier in the aqueous phase allowed separation of most of the selected analytes in a single run in a system fitted with a diode array detector recording three wavelengths (240 nm, 300 nm, and 380 nm) simultaneously. The microemulsion employed consisted of 2.25 g of SDS, 0.75 g of Brij 35, 6.6 g 1‐butanol, 0.8 g n‐octane, 17.5 g 2‐propanol, and 72.1 g of 10 mM borate buffer (pH 9.2). Detection limits from 0.65 to 6.0 μg/mL were obtained and the calibration plots were linear over at least one order of magnitude for all analytes. The developed method could be applied to the determination of UV filters in several sun protection products including lotions, milks, and oils. Comparison of the obtained data with those from an HPLC method described in the literature showed acceptable agreement.     

Cystine and cysteine analysis as the same phenylthiocarbamyl derivatives by HPLC in protein hydrolyzates

Summary A new approach is described, and a novel explanation presented, for the high performance liquid chromatographic analysis of cystine and cysteine as their phenylthiocarbamyl derivatives. PTC cystine and cysteine have been eluted with the same retention times and molar responses, most probably due to electrophilic attack of phenylisothiocyanate on cystine resulting in the scission of the disulfide bond yielding two moles of cysteine. Further, total PTC cystine and cysteine have been measured both in model solutions and in standard protein hydrolyzates (lysozyme, bovine albumin, ribonuclease) with the same linearity as the other ineteen amino acids. The reproducibility of the measurements, at the 250–750 pmole level, proved to be 4.1% (Relative Standard Deviation %) or less.     

On the choice of active space orbitals in MCSCF calculations

We describe a procedure which may be used to aid selection of the active space in multiconfigurational self-consistent field (MCSCF) calculations for general chemical systems. Starting from a restricted Hartree-Fock calculation, we define a hierarchy of interacting virtual orbitals for every occupied orbital. The most strongly interacting orbitals are then taken to constitute the active space in a configuration interaction (CI) calculation. The natural orbital occupation numbers obtained from the CI calculation are then used to choose the active space to be used in a subsequent MCSCF calculation. We illustrate our method on a number of systems (Li₂, B₂, C₂, carbonyl oxide and the transition state for oxidation of H₂S by dioxirane). In all these cases, ‘intuitive’ active spaces are inadequate, as are active spaces derived from the natural orbitals of unrestricted Hartree-Fock calculations.     

ansa-Metallocene derivatives XXXIII. 2-Dimethylamino-substituted bis-indenyl zirconium dichloride complexes with and without a dimethylsilyl bridge: syntheses, crystal structures and properties in propene polymerization catalysis

Bis(2-N,N-dimethylamino-indenyl) zirconium dichloride, (2-(CH₃)₂N-C₉H₆)₂ZrCl₂, and dimethylsilyl-bridged bis(2-N,N-dimethylamino-indenyl) zirconium dichloride, (CH₃)₂Si(2-(CH₃)₂N-C₉H₅)₂ZrCl₂, were prepared by reaction of the corresponding ligand lithium salts with ZrCl₄ in toluene. Diffractometric structure determinations reveal C₂-symmetric complex geometries for both complexes. An increased electron density at the Zr center of the dimethylamino-substituted complexes is indicated by reduction potentials which are 0.3–0.4 V more negative than those of their unsubstituted analogs. When activated with methyl aluminoxane in toluene solution, (CH₃)₂Si(2-(CH₃)₂N-C₉H₅)₂ZrCl₂ catalyzes the polymerization of propene to polymers with a microstructure comparable with that of polymers produced with other Me₂Si-bridged bis(indenyl)ZrCl₂ complexes, but with a substantially increased fraction of i-propyl end groups derived from alkyl exchange between Zr-polymer and Al---Me species.