Some geometrical iteration methods for nonlinear equations

This paper describes geometrical essentials of some iteration methods （e.g. Newton iteration, secant line method, etc.） for solving nonlinear equations and advances some geometrical methods of iteration that are flexible and efficient.     

Superconvergence analysis of the finite element method for nonlinear hyperbolic equations with nonlinear boundary condition

This paper discusses the semidiscrete finite element method for nonlinear hyperbolic equations with nonlinear boundary condition. The superclose property is derived through interpolation instead of the nonlinear H^1 projection and integral identity technique. Meanwhile, the global superconvergence is obtained based on the interpolated postprocessing techniques.     

Uniform persistence of multispecies ecological competition predator-pray system with Holling Ⅲ type functional response

The main purpose of this paper is to study the persistence of the general multispecies competition predator-pray system with Holling Ⅲ type functional response.In this system,the competition among predator species and among prey species are simultaneously considered.By using the comparison theory and qualitative analysis,the sufficient conditions for uniform strong persistence are obtained.     

自喇曼散射及二阶色散系数对三阶飞秒孤子的影响

介绍了分步傅里叶数值方法的原理和步骤。通过数值模拟,得到随着自喇曼散射系数的增大,三阶飞秒孤子分裂的两个孤峰,左峰的超前越来越小,而右峰的延迟越来越大。从频谱上看,开始蓝移随着自喇曼散射系数的增大而增大,当增大到一定程度时,两边的频谱会中移。增加二阶色散系数,三阶飞秒孤子的裂化也会得到控制,在频域内表现为频谱中移变窄。     

基于非线性材料二次谐波与混频特性非逻辑门运算的全光实现

Optics has already been proved as a successful candidate for conducting parallel logic, arithmetic and algebraic operations. Several all-optical data processors were proposed since last few decades. To implement these systems, different data encoding decoding techniques such as polarization encoding, tristate, quartenary state, multivalued state, symbolic substitution technique etc. have already been proposed. All these are done to use optics in a suitable platform. We propose here a new concept of encoding data by adopting frequencies variation technique for conducting a inversion operation successfully.     

光栅莫尔条纹在机床数控改造中的应用研究

从机床数控改造的实际出发,针对我国目前国产机床加工精度普遍不高,数控化程度较低等问题,提出了一种全新的设计方案,利用光栅作为位置检测元件,形成全闭环控制系统,结果表明既能够大大提高零件的加工精度,又能节省改造成本,为机床数控改造提供了参考。     

掺锗硅基高非线性光纤超连续光源研究

利用非线性偏振旋转锁模掺铒光纤激光器和1100m长的掺锗硅基高非线性光纤制作了超连续光源,获得了从1150～1750nm的超宽带输出光谱,其中1150～1350nm波段光谱起伏小于3dB,1600～1700nm波段平坦度优于1dB,并有很好的向长波延展空间。光谱展宽的机理为孤子分裂与受激拉曼散射,而四波混频使光谱进一步展宽。     

一种应用于LCoS光机的复眼照明系统仿真设计

复眼照明系统利用复眼透镜,可实现高亮度和较好的亮度均匀性,并且有较成熟的偏振处理方法,在投影系统特别是基于偏振光的投影系统中能提供比光棒照明系统更加高的亮度和好的均匀性的画面,使得光能利用率和图像均匀性有了较大的提高。在对复眼照明系统的原理进行分析的基础上,设计了一种用于投影光机的复眼照明系统,并用Matlab对该系统进行了光线追迹的仿真程序设计。对复眼照明系统的光线追迹进行了仿真。实际应用证明,在LCoS中采用本方案设计的照明系统比光棒照明系统具有更高的亮度和更好的均匀性。     

合肥光源相空间测量

 介绍了在合肥光源（HLS）上的相空间测量系统和测量结果,同时进行了工作点(Tune值)的计算。研究了电子储存环上三种相空间测量和计算方法：双位置单圈法、单位置双圈法和单位置单圈法。通过对仿真数据的计算和比较,论证了这三种方法的正确性和可行性,并分析了这三种方法的适用条件和在不同条件下的优缺点,为合肥光源的相空间测量提供了新的设计思路。     

数字投影三维数字成像的并行DSP实现

提出一种基于数字白光投影的三维数字成像嵌入式DSP处理系统.该系统根据时序变频条纹投影原理,利用TMS320DM642定点DSP和FPGA硬件电路以及多线程软件技术实现了条纹编码、编码图像采集和条纹分析的流水线处理过程.为了提高相位解调算法的速度,使用软件流水对其进行了优化.对于512×512像素图像,五步相移时的条纹图处理速度可达到39.7 fps,能满足快速条纹图处理的要求.测量实验表明,该系统可以实现快速、准确的三维轮廓测量.