激发态Ti＋(3d14s2)与丙炔醇气相反应理论研究

用量子化学密度泛函(DFT)方法研究了激发态Ti^＋(3d¹4s²)与丙炔醇(PPA)气相反应的机理. 在B3LYP/DZVP水平上, 优化了反应的两个通道的反应物、中间体、过渡态和产物的几何构型, 并在MP4/[6-311＋G**(C,H,O)＋Lanl2dz (Ti)]水平上计算了各驻点的单点能量. 为了确证过渡态的真实性, 在B3LYP/DZVP水平上进行了内禀坐标(IRC)计算和频率分析, 获得了二重态反应势能面, 确定了反应机理. 研究结果表明生成产物为[C₃H₃O]^＋和Ti—H的通道是主要反应途径.     

亚烷基卡宾与甲醛环加成反应机理的理论研究

用二阶微扰理论研究了单重态亚烷基卡宾与甲醛发生的三种环加成反应的机理 ，采用MP2/6－31G~*方法计算了势能面上各驻点的构型参数、振动频率和能量。根 据能量数据可以预言环加成反应（1）的a途径将是单重态亚烷基卡宾与甲醛环加成 反应的主要反应通道，该反应由两步组成：（I）亚烷基卡宾与甲醛生成了一富能 中间体（INT1a），是一无势垒的放热反应，（II）中间体异构化为产物亚烷基环 乙烷，其势垒为24.1 kJ·mol~(-1)(MP2/6-31G~*)。     

用石英晶体微天平研究表面活性剂在银固态表面上的动态吸附

吸附是表面活性剂的一个重要特征.迄今用于原位监测表面活性剂在固体表面上吸附重量变化的方法尚不多见.近年来压电石英晶体作为一种高灵敏的质量传感器(石英晶体微天平)已被用于大气和溶液中多种微量成分的监测.用石英晶体微天平研究I~-、Br~-和表面活性剂在金电极上的吸附行为亦有报道.本文研究了十六烷基三甲基溴化铵(CTAB)、十二烷基磺酸钠(SDSO)、十二烷基硫酸钠(SDS)在银固态表面上的吸附平衡动力学特性及其吸附机制.     

Electron-density-dependent fused-sphere surfaces derived from pseudopotential calculations

Fused-sphere surfaces can be used to mimic a molecular boundary associated with a constant value of the electron density. The simplest of such fused-sphere models are constructed by using the atomic radii for the spherical isodensity surfaces of individual atoms. In this work, we discuss the extension of this model to molecules containing atoms beyond the second row. In these many- electron systems, the computation of electron densities is usually simplified by adopting a pseudopotential (or effective-core potential) approach. Here, we discuss the performance of large- and small-core pseudo-potential calculations as a tool to derive atomic radii. Our results provide an optimum set of variable radii that can be used to build fused-sphere surfaces. This continuum of surfaces provides a simple approximation to the low-electron-density regions around molecules with heavy atoms.     

Selection of terms for a CI wavefunction to preserve potential surface features

A cumulative selection procedure for choosing configuration functions for inclusion in CI calculations is described. The objective of the method is to obtain equal energy loss, relative to unselected calculations, for different states and different regions of the potential surface. Results obtained from calculations on the BH molecule indicate an overall advantage in comparison to the threshold selection procedure, particularly with regard to molecular geometry changes.     

An optical surface plasmon resonance biosensor for determination of tetanus toxin

Surface plasmon resonance (SPR) has been successfully applied for the simple, rapid, and label-free assay of various biomolecules. This assay evaluates a novel wavelength modulation SPR biosensor for the detection of tetanus toxin. The wavelength modulation SPR biosensor is designed based on fixing the incident angle of light and measuring the reflected intensities in the resonance wavelength range spanning 400-800 nm simultaneously. Tetanus toxin (TeNT), one of the most potent toxins known, is synthesized as a 150 kDa single polypeptide chain. The SPR biosensor has been shown to be capable of directly detecting concentration of tetanus toxin as low as 0.028 Lf ml⁻¹. Under selected experimental conditions, the SPR biosensor has a good reproducibility, sensitivity and reversibility. The results illustrate how wavelength modulation SPR biosensor can be used to detect biomolecular interactions.     

Effect of Inorganic Ions on Oleate Adsorption at a Nigerian Hematite–Water Interface

Using “pure” natural hematite selected from a high silica Nigerian hematitic ore, oleate adsorption densities at the hematite–water interface were determined in the presence of various inorganic ions (anions and cations) of different charges and at varying concentrations. Adsorption density was determined using electrical conductivity measurements. The specific surface area of the hematite particles was determined using the method of adsorption of paranitrophenol in aqueous solution. Inorganic ions in solution depressed oleate adsorption at the aqueous hematite surface. The charge of the ion proved to be the dominant factor determining the depression of oleate adsorption. Ionic strength also was an influence, up to a limiting value at which monolayer oleate coverage of the hematite surface occurred. The inorganic ions in solution are considered to function through nonspecific adsorption in the diffuse region of the electric double layer.     

HSCCS自由基势能面的理论研究

在CCSD(T)/6-311G(d,f)//MP2/6-311G(d,f) ZPE水平下,计算得到含有8个异构体和11个过渡态的HSCCS自由基体系势能面,讨论了异构体的结构与稳定性及异构体之间的异构化过程.结果表明异构体m1的能量最低,除m1以外,异构体m2和m3的能量也比较低,在MP2水平上,过渡态TS1的能量比异构体m2仅高3.9kJ/mol,而在CCSD(T)水平上,TS1的能量比m2低14.6 kJ/mol,这说明异构体m2可以迅速转化为能量更低的m1.异构体m3的能量比异构体m1高49.99 kJ/mol,可以推断,在合适的实验条件下可以观测到异构体m1.     

A Branched Pore Model Analysis for the Adsorption of Acid Dyes on Activated Carbon

A new branched-pore adsorption model has been developed using an external mass transfer coefficient, K _f, an effective diffusivity, D _eff, a lumped micropore diffusion rate parameter, K _b, and the fraction of macropores, f, to describe sorption kinetic data from initial adsorbent-adsorbate contact to the long-term adsorption phase. This model has been applied to an environmental pollution problem—the removal of two dyes, Acid Blue 80 (AB80) and Acid Red 114 (AR114), by sorption on activated carbon. A computer program has been used to generate theoretical concentration-time curves and the four mass transfer kinetic parameters adjusted so that the model achieves a close fit to the experimental data. The best fit values of the parameters have been determined for different initial dye concentrations and carbon masses. Since the model is specifically applicable to fixed constant values of these four parameters, a further and key application of this project is to see if single constant values of these parameters can be used to describe all the experimental concentration-time decay curves for one dye-carbon system.The error analysis and best fit approach to modeling the decay curves for both dye systems show that the correlation between experimental and theoretical data is good for the fixed values of the four fitted parameters. A significantly better fit of the model predictions is obtained when K _f, K _b and f are maintained constant but D _eff is varied. This indicates that the surface diffusivity may vary as a function of surface coverage.     

Optimization of the Conditions for the Cr (III) Adsorption on Activated Carbon

In order to understand the patterns of the adsorption equilibrium of Cr (III) on activated carbon, the adsorption process was studied by two different ways: classical batch experiments on commercial Norit and Merck activated carbons and their oxidized forms in a wide range of pHs; and extended time-based tests at the same pH values on the same adsorbents. This approach allowed us to understand the role of texture, chemical carbon surface functionality and experimental conditions (initial pH of the solution, contact time and adsorbate/adsorbent ratio) on the effectiveness of Cr (III) removal. The adsorption process of Cr (III) at (24 ± 1^∘C) on Merck and Norit activated carbons and their oxidized forms were studied at pH values between 1.5 and 5 (either adjusted or buffered). Chromium concentration was fixed at 200 ppm. The carbon loading ranged from 1.2 to 20 g/l. The carbon/Cr (III) solution contact time was varied from 0.5–1 month to 5 months, to ensure that the saturation of the carbon level was reached. According to the data obtained, the presence of carboxylic groups on carbon surface seems to enhance Cr (III) uptake at initial pH of the solution in the range between 2 and 4. Depending on the nature of the adsorbent surface chemistry, the contact time to reach equilibrium may range from 3 to 5 months. There is an optimum carbon loading which limits the Cr (III) uptake/removal at given pH value. In order to understand the adsorption process, an ion exchange, surface complex and surface precipitation were considered. This paper was presented in the 5th Brazilian Meeting on Adsorption, held at Natal, Brazil, 18-21 July, 2004.