Polygermoxanes suitable for biochemical purposes: II Linear trigermoxanes (high-viscosity oils)

Linear trigermoxanes, R¹ RGeOGe(R³)₂OGeRR¹, a new series of organogermanium compounds, were synthesized by reaction of a lithium organogermanolate with a suitable organogermanium dihalide. With alkyl or phenyl substituents, these trigermoxanes are structurally unstable viscous oils, due to redistribution reactions. When R³ substituents are bulky groups, such as mesityl, trigermoxanes are thermally and structurally stable oils; depending on the R¹ and R² substituents their viscosities lie in the range 240 to more than 1500 cPo (mPa s) at 20°C. When both terminal germanium atoms are substituted with two mesityl groups, trigermoxanes are stable glassy solids.     

Second-order nonlinear optical properties of side-chain liquid crystalline polymers studied by second harmonic generation from thin films

The two independent elements of the second-order nonlinear optical susceptibility tensor of a range of contact poled, donor–acceptor substitued side-chain polymers are reported. The susceptibilities were measured by second harmonic generation from thin films, typically less than 0.5 μm thick, at a fundamental wavelength of 1064 nm. The largest value was χ = 2.64 pm/V which is three times greater than the χ value of KDP and was measured in a nitrobenzylidene side chain, polyhydroxystyrene polymer with an eleven unit alkyl chain spacer attaching the side group to the backbone. Typical susceptibility values obtained were χ～0.3 pm/V and X⁽²⁾₃₃～1 pm/V. The coherence lengths of the materials, which lay in the range 4–12 μm, were measured at 1064 nm by the maker fringe technique using thick, wedge-shaped samples.     

Propene polymerization using homogeneous MAO-activated metallocene catalysts: Me2Si(Benz[e]Indenyl)2ZrCl2/MAO vs. Me2Si(2-Me-Benz[e]Indenyl)2ZrCl2/MAO

Propene was polymerized at 40°C and 2-bar propene in toluene using methylalumoxane (MAO) activated rac-Me₂Si(Benz[e]Indenyl)₂ZrCl₂ ( BI ) and rac-Me₂Si(2-Me-Benz[e]Indenyl)₂ZrCl₂ ( MBI ). Catalyst BI /MAO polymerizes propene with high activity to afford low molecular weight polypropylene, whereas MBI /MAO is less active and produces high molecular weight polypropylene. Variation of reaction conditions such as propene concentration, temperature, concentration of catalyst components, and addition of hydrogen reveals that the lower molecular weight polypropylene produced with BI /MAO results from chain transfer to propene monomer following a 2,1-insertion. A large fraction of both metallocene catalyst systems is deactivated upon 2,1-insertion. Such dormant sites can be reactivated by H₂-addition, which affords active metallocene hydrides. This effect of H₂-addition is reflected by a decreasing content of head-to-head enchainment and the formation of polypropylene with n-butyl end groups. Both catalysts show a strong dependence of activity on propene concentration that indicates a formal reaction order of 1.7 with respect to propene. MBI /MAO shows a much higher dependence of the activity on temperature than BI /MAO. At elevated temperatures, MBI /MAO polymerizes propene faster than BI /MAO. © 1995 John Wiley & Sons, Inc.     

A new protecting group for the exocyclic amino groups of nucleosides

A new protecting group has been developed for the exocyclic amino groups of nucleosides that occur in DNA. 3-Phenyl-[{N-(2-trimethylsilyl-ethoxycarbonyl)-2-amino}]-propanoic acid used as the protective agent.     

Influence of cellulose nanofibers on the curing behavior of epoxy/amine systems

Epoxy composites were prepared using diglycidyl ether bisphenol F and water-dilutable diglycidyl ether bisphenol A with curing agents, polyoxypropylenediamine and diethylmethylbenzenediamine, in water or dimethylformamide as a solvent. The influence of cellulose nanofibers and solvents on curing kinetics of epoxy composites was investigated. Curing kinetic parameters were calculated using the model-fitting methods and the isoconversional method. Among these, the Sestak–Berggren equation best fit the experimental data. Results indicated that dimethylformamide decreased the reaction rate, whereas water revealed the opposite pattern. Cellulose nanofibers catalyzed the reaction between bisphenol F resins and the aromatic curing agent.     

OH-terminated cyanopropyl silicones

Due to their high polarity and unique selectivity, cyanopropyl silicones are basic stationary phases for high resolution capillary gas chromatography. Different OH-terminated cyanopropyl silicones, containing a high cyanopropyl content, were synthesized and chromatographically evaluated. Special attention was paid to the degree of immobilization of the phases in FSOT columns. Depending on the problem at hand, a choice has to be made between immobilization and maximum selectivity.     

Convenient and High-Yielding Preparations of Mono(5-carboxy-2-ethylpentyl) Phthalate and its Ring-Deuterated Isomer – The “Third” Major Metabolite of Bis(2-ethylhexyl) Phthalate

Summary. The synthesis of an oxidative major metabolite of bis(2-ethylhexyl) phthalate is described. The target molecule and its ring-deuterated isomer were obtained via acylation of the appropriate -hydroxy benzyl ester or the corresponding carboxylate with phthalic anhydride or phthalic anhydride-d₄. All transformation steps proceed with high yields.     

Preparation of a set of selectively protected disaccharides for modular synthesis of heparan sulfate fragments: toward the synthesis of several <Emphasis Type="Italic">O</Emphasis>-sulfonated [β-D-GlcUA-(1→4)-β-D-GlcNAc]OPr types

A concise method for a stereocontrolled synthesis of a set of selectively protected disaccharides is reported. Coupling of the donor 11 onto acceptors 23 and 24, promoted by trimethylsilyl triflate-N-iodosuccinimide (TMSOTf-NIS), generated the disaccharides 25 and 26. Under typical conditions, condensation of the fully protected donor 12 onto acceptors 23 and 24 produced the disaccharides 27 and 28. The building blocks 25–28 were prepared in moderate yields having exclusive β-stereoselectivity. A unique pattern of protecting groups distinguished clearly between positions to be sulfated and functional groups remaining as free hydroxyl groups. Acetyl and/or levulinoyl esters temporarily protected the positions to be sulfated, while benzyl ethers were used for permanent protection. The anomeric positions were protected as allyl ethers, whereas the 4′-positions were masked as p-methoxybenzyl (PMB) ethers. The orthogonality of the PMB and allyl groups can then be used for further elongation of the chain by recurrent deprotection and activation steps. The hydroxyl group, OH-6, of glucosamine moieties was protected as a TBDPS ether to avoid oxidation. A five-step deprotection/sulfonation sequence was applied to the disaccharide 27 to generate the corresponding sulfated [β-D-GlcUA-2-OSO₃Na-(1→4)-β-D-Glc pNAc]-(1→O-Pro) 34.     

Liquid crystalline properties and photochromism of 4-alkyl-N-(4-alkloxysalicylidene)anilines

Eight new homologous series of 4-alkyl-N-(4-alkloxysalicylidene)anilines were synthesized. The phase transitions of these homologues were determined using differential scanning calorimetry and polarizing optical microscopy. The homologues began to exhibit liquid crystalline phases as the terminal alkyl or alkoxyl chains were lengthened. In addition, some members of these homologues series exhibited photochromism in the solid state.