NOx在固体电解质电解池上的电化学消除

 综述了近年来利用固体电解质电解池消除NO的研究进展．重点总结了电化学消除NO研究体系、电化学消除NO分解机制、O2－在固体电解质电解池中传导的控速步骤、电极种类和形态对NO分解性能的影响以及直流与交流电作用的差异等几个方面的研究结果．在RuO2—Ag—YSZ—Pd电解池上实现的NO选择性分解是迄今为止的最佳结果，500℃下NO的转化率为31．8％，NO的分解活性是O2的分解活性的13倍．该领域今后研究的主要方向是，进一步提高NO分解相对于共存O2离子化的选择性、降低O2－在阴极界面处的传导阻力和探寻可在更低温度传导O2－的新的固体电解质     

Sm修饰的Ni-MgO催化剂制备碳纳米管的研究

Carbon nanotubes (CNTs) have been synthesized over Ni-MgO and Ni-Sm-MgO catalysts by decomposition of CH₄ at 650 ℃. The addition of Sm into Ni-MgO catalyst not only promotes the catalytic activity and lifetime of the catalyst, but also improves the graphitization and heat stability of carbon nanotubes. The yield of CNTs obtained over the Ni-10Sm-MgO catalyst reaches 33 g C·(g Ni)^-1, being more than 5 times higher than that of the Ni-MgO catalyst. XRD and TPR results of the catalysts indicate that there is a remarkable interaction of Ni with Sm species, which facilitates the reduction of nickel and restrains the Ni particles from agglomerating.     

Synthesis, Characterization and Thermal Decomposition Mechanism of Cetyltrimethyl Ammonium Tetrathiotungstate

The synthesis, characterization and thermal decomposition mechanism of cetyltrimethyl ammonium tetrathiotungstate （CTriMATT） were studied herein. The as-synthesized CTriMATT was characterized by Elemental analysis, X-ray diffraction （XRD）, Fourier transform infrared （FT-IR）, Ultraviolet visible （UV-Vis） spectra. The results showed that the as-synthesized CTriMATT had high purity and good crystallinity. The introduction of alkyl groups induced a shift of the stretching vibration band of W-S bond to lower wavenumber, while it had no influence on the position of WS4^2-. Thermogravimetric analysis （TG）, differential thermal analysis （DTA） and in situ XRD characterizations revealed that CTriMATT began to decompose at 423 K in nitrogen and was converted to WS2 eventually. In addition, the decomposition product of CTriMATT at 673 K in nitrogen was characterized by N2 adsorption （BET） and scanning electron microscopy （SEM）. The results demonstrated that WS2 with higher specific surface area, and pore volume could be obtained from the thermal decomposition of CTriMATT in nitrogen.     

A comparative study on the thermal decomposition of some transition metal carboxylates

Thermal decomposition of transition metal malonates, MCH₂C₂O₄?xH₂O and transition metal succinates, M(CH₂)₂C₂O₄?xH₂O (M=Mn, Fe, Co, Ni, Cu, Zn) has been studied employing TG, DTG, DTA, XRD, SEM, IR and Mössbauer spectroscopic techniques. After dehydration, the anhydrous metal malonates and succinates decompose directly to their respective metal oxides in the temperature ranges 310–400 and 400–525°C, respectively. The oxides obtained have been found to be nanosized. The thermal stability of succinates have been found to be higher than that of the respective malonates.     

Cu，Pd－ZSM－5上NO分解和CO氧化的催化作用

双交换Ｃｕ，ｐｄ－ＺＳＭ－５催化剂（Ｃｕ交换度为１０５％，Ｐｄ交换度分别为３．４％和３３％）对ＣＯ氧化反应有活性增强作用，对ＮＯ分解反应不存在增强效应．双交换催化剂在于交换程序不同，而表面物种不同，活性组分的分布状态不同，因而有不同的活性．先交换Ｃｕ，４００℃焙烧后再交换ｐｄ的Ｃｕ－Ｐｄ－ＺＳＭ－５催化剂，对上述两类反应的活性存双组分催化剂中均为最高．Ｈ_２－ＴＰＲ谱表明，共交换的Ｃｕ－Ｐｄ－ＺＳＭ－５中尚有部分ＣｕＣｌ＋占据了部分交换位置，而使ＣＯ氧化活性稍有下降．Ｎ_２－ＤＴＡ和Ｈ_２－ＴＰＲ谱结果表明，Ｐｄ交换到Ｃｕ－ＺＳＭ－５中后，抑制了吸附水和水合铜化合物的形成，由此提高了在２００—３００℃时氧的吸附量．后者的大小和ＣＯ氧化活性有顺变关系．Ｎ_２－ＤＴＡ谱中３４０—４４５℃的放热峰可能分别表征了和ＮＯ分解活性有关的铜氧桥或把氧桥的形成，该放热峰的峰温愈低，峰面积愈大，则ＮＯ分解活性愈高．     

四种溴代甲苯异构体的质谱区分

本工作用四种较新的质谱技术(碰撞诱导解离(CID),电荷剥离(CS),电荷分离(CSe),电子捕获诱导解离(ECID)谱研究了邻、间、对溴甲苯和溴化苄四种异构体。四种技术在一定程度上都可区分这些异构体。其中比较四种异构体ECID谱中ECID峰的相对强度可得到满意的区分效果。     

Obtaining Kinetic Parameters by Modulated Thermogravimetry

A new technique, called modulated thermogravimetry, is introduced as a tool for obtaining continuous kinetic information for decomposition and volatilization reactions. The approach makes use of an oscillatory temperature program to obtain kinetic parameters during a mass loss. MTGA™ may be used under quasi-isothermal conditions to observe a single mass loss or may be combined with linear heating rate or Hi-Res™ controlled rate thermogravimetry to scan from one mass loss region to another. Results obtained are in agreement with those obtained by other kinetic methods. This revised version was published online in July 2006 with corrections to the Cover Date.     

Excess molar heat capacities of ((<Emphasis Type="Italic">R</Emphasis>)-(+)-α-pinene+(<Emphasis Type="Italic">S</Emphasis>)-(-)- α-pinene) at temperatures between 293.15-308.15 K

Summary {\rtf1\ansi\ansicpg1250\deff0\deflang1038\deflangfe1038\deftab708{\fonttbl{\f0\froman\fprq2\fcharset238{\*\fname Times New Roman;}Times New Roman CE;}} \viewkind4\uc1\pard\f0\fs20 New explanations are given for two types of irregular thermogravimetric (TG) data. A TG relationship between mass and temperature is derived on the basis of migration behavior of bubbles generated in bulk of sample system, and superposed on that derived on the basis of kinetics of the 4\super th\nosupersub order event, which is superposed on the experimental TG data obtained from three reference papers. This suggests that these TG data are reflecting migration of bubbles. A dependence of TG behavior on heating rate, which is contrary to usual that, is shown and is explained in terms of event-rate determination by boiling. \par }     

Thermal Decomposition Characteristics of 1,7-Diazido-2,4,6-trinitrazaheptane and its Application in Propellants

The thermal decomposition characteristics of1,7-diazido-2,4,6-trinitrazaheptane (DATH) and multi-component systems containing DATH were studied by using DSC, TG and DTG techniques. Three –NO₂ groups in the DATH molecule break away first from the main chain when DATH is heated up to 200°C. Following this process, the azido groups and the residual molecule decompose rapidly to release a great deal of heat within a short time. In the multi-component systems, DATH undergoes a strong interaction with the binder of the double-base propellant and a weak interaction with RDX. The burning rates of the two propellants were determined by using a Crawford bomb. The results showed that the burning rate rises by about 19–66% when 23.5%DATH is substituted for RDX in a minimum smoke propellant. Meanwhile, the N₂ level in the combustion gases is enhanced, which is valuable for a reduction of the signal level of the solid propellant. This revised version was published online in July 2006 with corrections to the Cover Date.     

Preparation and thermal analysis of synthetic malachite CuCO3·Cu(OH)2

The synthesis of malachite CuCO₃·Cu(OH)₂ or Cu₂CO₃(OH)₂ was studied through titrations of copper(II) salt solutions with a solution of sodium carbonate at different temperatures. The precipitates were characterized by TG, IR and chemical analysis. The composition varies depending on thepH of the solution and the temperature. Purer malachite was synthesized by simple mixing of a solution of copper(II) nitrate or sulfate with a solution of sodium carbonate at 50°C.The kinetics of the thermal decomposition of synthetic malachite was described by eitherR ₃ orA _m(m=1.2–1.4) law, according to TG analysis, both isothermal and nonisothermal. The Arrhenius parameters determined using three different integral methods showed the kinetic compensation effect, which is correlated to the working temperature interval analyzed.The authors thank Mr. H. Takemoto for analyzing kinetics of the thermal decomposition of synthetic malachite.