土地监察移动数据库技术及其应用

近年来,基于移动数据库的移动GIS技术发展呈加速趋势,并在越来越多领域的应用中取得成功.在土地监察工作中采用移动GIS手段,有利于实现实时、快速执行土地违法勘察、执法动态监察等工作,为建立完善的土地管理长效机制提供技术支持,保障人民群众的利益和社会的稳定.本文先介绍移动数据库的原理和架构,然后结合土地监察实际需求,重点探讨移动数据库在土地监察中需要解决的数据同步、数据复制与缓存和数据安全存储等关键技术问题.     

Quantitative selenium speciation in human urine by using liquid chromatography–electrospray tandem mass spectrometry

A liquid chromatography–electrospray-tandem mass spectrometry (ES-MS/MS) method was developed for the speciation analysis of four organic selenium species of relevance to human urinary metabolism, namely trimethylselenomium ion (TMSe⁺), selenomethionine (SeMet) and the two selenosugars, methyl 2-acetamido-2-deoxy-1-seleno-β-d-galactos/-glucos-amine (SeGalNAc and SeGluNAc, respectively). Their chromatographic separation was achieved by using a cation exchange pre-column coupled in-series with a reversed-phase high-performance liquid chromatography column, along with an isocratic mobile phase. Online detection was performed using ES-MS/MS in selective reaction monitoring mode. SeGalNAc was detected as the major human urinary metabolite of selenium in the samples analysed, whereas TMSe⁺ was detected in the urine of one volunteer before and after receiving a selenium supplement. SeMet was not detected as a urine excretory metabolite in this study. Spiking experiments performed with the urine samples revealed significant signal suppression caused by coeluting matrix constituents. To overcome such interferences, isotopically labelled ¹³CD₃⁸²SeGalNAc was used as an internal standard, whereas in the absence of an isotopically labelled internal standard for TMSe⁺, the standard addition method was applied. Quality control for the accurate quantitation of TMSe⁺ and SeGalNAc was carried out by analysing spiked human urine samples with appropriate selenium standards over a concentration range of 10–50 μg Se L⁻¹. The method has achieved a limit of detection in the presence of urine matrix comparable to that of HPLC-inductively coupled plasma-mass spectrometry for the four selenium species: 1.0 μg Se L⁻¹ for TMSe⁺, 5.6 μg Se L⁻¹ for SeMet, and 0.1 μg Se L⁻¹ for both SeGalNAc and SeGluNAc.     

基于光纤SPR光谱分析的污水降解过程监测研究

讨论了光纤表面等离子体波传感器的工作原理,并对将其用于监测以甲基橙为代表的环境污水降解过程的可行性进行了探讨。用光纤SPR传感器监测了50 mL初始浓度为30 mg·L-1的甲基橙原溶液在降解过程浓度的变化,对降解过程中光纤SPR传感器的光谱进行了详细的分析;同时采用紫外-分光光度计对降解过程中溶液浓度的变化进行了监测,并对2种方法所测的数据进行了分析对比。结果表明,光纤SPR同常规方法的测量结果一致,随着降解时间的增加,甲基橙溶液的吸光度和浓度逐渐减小,光纤SPR传感器的共振波长逐渐发生蓝移,同初始标定的甲基橙原溶液共振光谱比较,说明甲基橙逐渐被降解,且在2 h内降解率达到73%,说明用光纤SPR传感器监测污水降解过程是完全可行的。研究结果不仅为环境污水降解过程提供了一种新的监测方法,同时促进了我国SPR传感技术与环保监测研究结合,为光纤SPR技术走向实用,并最终实现产业化积累了经验。     

Electrochemical detection of nitrate,nitrite and ammonium for on-site water quality monitoring

This review examines the most recent electrochemical developments for nitrate, nitrite and ammonium detection for on-site water monitoring. There remains a high demand for effective field-based detection of the dissolved inorganic nitrogen (DIN) analytes to aid in mitigating nitrogen loading. Electrochemical approaches show increasing potential to fill this role as advancements in nanotechnology continually improve analytical performance and on-site applicability. However, translating these improvements into the field still faces the resonating challenges of reaching analytical proficiency (selectivity, sensitivity, robustness, stability), practical end-user functionality, minimal matrix interferences and cost effectiveness. Herein, we elaborate on these challenges via a critical evaluation of current studies and examine how realistic the prospects of on-site nitrate, nitrite and ammonium are. We also present recommendations in addressing these gaps to conclude the review.     

Sample preparation,instrumental analysis,and natural distribution of complex organic pollutants in the wastewater from unconventional gas production

Large amounts of flowback and produced water (FPW) have been generated from hydraulic fracturing process for the production of unconventional gas such as shale gas. Complex organic pollutants are abundantly present in FPW with revealed toxicity to aquatic organisms and these contaminants may transfer into surrounding aquatic environment. Characterization and determination of complicated organic pollutants in FPW remains a challenge due to its complex composition and high salinity matrix. This review article covers the progress of recent 5 years regarding the sample preparation and instrumental analysis methods and thus summarizes the advantages and disadvantages of these methods for critical analysis of organic contaminants in FPW samples. Furthermore, the natural distribution of detected organic compounds and their transformation were reviewed and discussed to enhance the understanding of spatial and temporal behaviors of these organic pollutants in natural environment, paving the way for future development of pollution control policies and strategies. Enlightened by the studies of FPW contamination in the US, the investigations of FPW contamination in China continued to grow due to rapidly growing production of shale gas in China and resulted pollution.     

Vapor deposition of ultrathin hydrophilic polymer coatings enabling candle soot composite for highly sensitive humidity sensors

Candle soot (CS) is a desirable carbon nanomaterial for sensors owing to its highly porous nanostructure and large specific surface area. CS is advantageous in its low-cost and facile preparation compared to graphene and carbon nanotubes, but its pristine nanostructure is susceptible to collapse, hampering its application in electronic devices. This article reports conformal coating of nanoscale crosslinked hydrophilic polymer on CS film using initiated chemical vapor deposition, which well preserved the CS nanostructure and obtained nanoporous CS@polymer composites. Tuning coating thickness enabled composites with different morphologies and specific surface areas. Surprisingly, the humidity sensor made from composite with the lowest filling degree, thus largest specific surface area, showed relatively low sensitivity, which is likely due to its discontinuous structure, thus insufficient conductive channels. Composite sensor with optimum filling degree shows excellent sensing response of more than 10³ with the linearity of R² = 0.9400 within a broad relative humidity range from 11% to 96%. The composite sensor also exhibits outstanding sensing performance compared to literature with low hysteresis (3.00%), a satisfactory response time (28.69 s), and a fast recovery time (0.19 s). The composite sensor is fairly stable and durable even after 24 h soaking in water. Furthermore, embedding a humidity sensor into a face mask realizes real-time monitoring of human breath and cough, suggesting promising applications in respiratory monitoring.     

同位素内标-气相色谱-高分辨双聚焦磁质谱法检测血清中多溴联苯醚

建立了同位素内标-气相色谱-高分辨双聚焦磁质谱(GC-HRMS)同时测定人体血清中14种多溴联苯醚(PBDEs)的方法.血清样品解冻后,取0.5 mL与13 C标记的内标物进行混合,加入甲醇沉淀样品中的蛋白质,比较了3种酸化条件下的去脂效果和回收率,结果显示硫酸去脂效果最好;使用液液萃取法提取样品中的目标物,比较了不同...     

加速溶剂提取-同位素稀释-高分辨气相色谱-高分辨质谱法测定生物样品中82种多氯联苯

我国水产品中多氯联苯(PCBs)的检测方法,主要以6种指示性PCBs和12种二噁英类共平面PCBs为主,仅涵盖有限的PCBs。为更全面地获得生物体中PCBs的浓度水平,深入探讨PCBs在生物体内的代谢和富集特征,进而准确评价PCBs对人类的暴露水平及风险,以鱼和贝类作为生物样品代表,建立了加速溶剂提取-同位素稀释-高分辨气相色谱-高分辨质谱(ASE-ID-HRGC-HRMS)测定生物样品中82种PCBs的方法。比较了振荡提取和加速溶剂提取两种提取方式的回收率和重复性,最终采用正己烷-二氯甲烷(1∶1, v/v)对PCBs进行加速溶剂提取。考察了各流分淋洗液对PCBs的回收率,确定了样品提取液经8 g 44%酸性硅胶层析柱(内径15 mm), 90 mL正己烷洗脱的净化方式。样品提取液净化浓缩后进行HRGC-HRMS分析,色谱柱采用DB-5MS超低流失石英毛细管柱(60 m×0.25 mm×0.25 μm)。通过优化后的升温程序对化合物进行分离,以保留时间和两个特征离子精准定性,采用同位素内标法定量。结果表明,在0.1~200 μg/L范围内,平均相对响应因子(RRF)的相对标准偏差值(RSD, n=7)均≤20%,相关系数(r²)>0.99。生物样品中PCBs的方法检出限为0.02~3 pg/g;鱼类中PCBs平均加标回收率为71.3%~141%, RSD(n=7)为2.1%~14%;贝类中PCBs平均加标回收率为76.9%~143%, RSD为1.4%~11%。该方法灵敏、准确、可靠,可以更加全面具体地分析鱼和贝类等水产品受PCBs的污染情况,为国内外开展生物监测提供有效的技术支持,从而服务于相关生态环境管理及履行《斯德哥尔摩公约》。     

LC–MS3 Strategy for Quantification of Carbamazepine in Human Plasma and Its Application in Therapeutic Drug Monitoring

This study developed a detection method based on the strategy of HPLC/MS³ and verified its suitability by quantifying carbamazepine in human plasma. The high-performance liquid chromatography–tandem mass spectrometry (HPLC/MS³) system was performed using a Shimadzu UFLC XR liquid chromatography and a SCIEX QTRAP^® 5500 linear ion trap triple quadrupole mass spectrometer. The specific operation was as follows: the sample protein was firstly precipitated using methanol, then carbamazepine and carbamazepine-D₂N¹⁵ were separated on an ACQUITY UPLC HSS T3 column using the gradient elution with solvent A (0.1% formic acid) and solvent B (0.1% formic acid in acetonitrile) at a flow rate of 0.25 mL/min. Each sample was run for 7 min. This method was validated for various parameters including accuracy, precision, selectivity, linearity, LLOQ, etc. Only 5 μL of sample plasma could obtain the result of LLOD 0.5 µg/mL. The intra-day and inter-day precision was <8.23%, and accuracy was between −1.74% and 2.92%. This method was successfully used for monitoring the blood concentration of epilepsy patients after carbamazepine treatment.     

A new ultrasonic measurement system for the cure monitoring of thermosetting resins and composites

Measurements of the ultrasonic sound speed of thermosetting resins and composites can be used as an in-process cure monitoring technique. Ultrasonic measurements have an advantage over other in-process techniques in that ultrasonic sensors do not make contact with the part (thus leaving no imbedded sensor or witness mark) and can make true bulk measurements of the part. A new commercially available ultrasonic cure monitoring system has been developed which easily enables ultrasonic measurements to be made in compression molding, resin transfer molding, and autoclave processes. Advancements in ultrasonic sensor technology enable the sensor to maintain good coupling to the part during thermal cycling to 260C. Data is presented showing the change in ultrasonic sound speed during the compression molding of a graphite-epoxy prepreg. The data shows a good relationship to the ionic conductivity and resistivity data collected via dielectric cure monitoring.This effort was sponsored by the Manufacturing Technology Directorate, Wright Laboratory (WL/MTX), Air Force Material Command, USAF, under cooperative agreement award(s) to NCMS. The U. S. Government is authorized to reproduce and distribute reprints for Governmental purposes notwithstanding any copyright notation thereon. The views and conclusions contained herein are those of the authors and should not be interpreted as necessarily representing the official policies or endorsements, either expressed or implied, of Wright Laboratory or the U.S. Government.