Voltammetric Studies of the Interaction of Tris (1,10-phenanthroline) Cobalt (III) with Bovine Serum Albumin

Recently, the studies on the interaction of DNA with small molecules have been attracting much interest1-6. These researches not only gave the important information about thermodynamics and kinetics, but also can prompt the combination between the electrode substances and biomacromolecule with super catalysis and sensor character. It is of great significance in understanding energy conversion and metabolism in live body, biomolecular structure, various physical and chemical characters for e…     

基于普鲁士蓝(PB)膜修饰铂电极的葡萄糖传感器的研究

在制备PB膜修饰铂盘电极的基础上,利用修饰电极对过氧化氢的电催化还原特性,得到了性能优良的葡萄糖传感器。作者系统地考察了有关修饰膜制备和测试实验条件对传感器性能的影响,结果表明传感器的最佳工作电位是0．05V,测试溶液的最适PH值为6．5,在选定的工作条件下,传感器的检测灵敏度为80nA/mmol.L^-1,线性范围为0．1－5mmol.L^-1,响应时间为1．5min,寿命在1个月以上,表观米氏常数为21mmol.L^-1。本方法制得的传感器能有效消除抗坏血酸,尿酸的干扰,有望用于血液中葡萄糖的直接测定。     

Application of a dispersive micro‐solid‐phase extraction method for pre‐concentration and ultra‐trace determination of cadmium ions in water and biological samples

A method for the trace determination of cadmium ions in water, human urine and human blood serum samples using ultrasonic‐assisted dispersive micro‐solid‐phase extraction (UA‐D‐μSPE) was developed. Silica‐coated magnetic nanoparticles were coated with polythiophene, and the resulting sorbent was characterized using thermogravimetry, differential thermal analysis, scanning electron microscopy, Fourier transform infrared spectrometry and X‐ray diffraction. Following UA‐D‐μSPE, cadmium ions were quantified using graphite furnace atomic absorption spectrometry. A Box–Behnken design was used for optimization of important sorption and desorption parameters in UA‐D‐μSPE: in the sorption step, pH of solution, sorption amount and sonication time for sorption; in the desorption step, concentration of eluent, volume of eluent and sonication time. The optimum conditions for the method were: pH of solution, 7.5; sonication time for sorption, 3 min; sorption amount, 35 mg; type and concentration of eluent, HCl and 1.1 mol l^?1; volume of eluent, 360 μl; sonication time for desorption, 110 s. Under the optimized conditions the limit of detection and relative standard deviation for the detection of cadmium ions by UA‐D‐μSPE were found to be 0.8 ng l^?1 and <6%, respectively.     

Generalized Hirshfeld Partitioning with Oriented and Promoted ProatomsSCI北大核心CSCD

In this study, we show how to generalize Hirshfeld partitioning methods to possibly include non-spherical proatom densities. While this generalization is numerically challenging(requiring global optimization of a large number of parameters), it is conceptually appealing because it allows the proatoms to be pre-polarized, or even promoted, to a state that more closely resembles the atom in a molecule. This method is based on first characterizing the convex set of proatom densities associated with the degenerate ground states of isolated atoms and atomic ions. The preferred orientation of the proatoms' densities are then obtained by minimizing the information–theoretic distance between the promolecular and molecular densities. If contributions from excited states(and not just degenerate ground states) are included in the convex set, this method can describe promoted atoms. While the procedure is intractable in general, if one includes only atomic states that have differing electron-numbers and/or spins, the variational principle becomes a simple convex optimization with a single unique solution.     

Preparation and thermal properties of a novel core‐shell structure flame‐retardant copolymer

In order to improve the flame retardancy of polystyrene (PS), a phosphorus and nitrogen comonomer, named AC₂NP₂, was synthesized and then incorporated into various amounts of PS by seeded emulsion polymerization. The modified methacrylate (AC₂NP₂) was used as the core phase, the styrene as the shell phase, then flame‐retardant effect copolymers with core‐shell structure were prepared successfully. The particle size was ranged from 40 to 60 nm, and the structure and properties of the copolymers were characterized in detail. Notably, despite a few amounts of the AC₂NP₂ units in the copolymers, all the copolymers exhibited significantly enhanced thermal stability and reduced flammability as compared with pure PS. Furthermore, from differential scanning calorimetry test, it was observed that the glass transition temperature was tinily influenced with the incorporation of commoner. The incorporation of P‐N comonomer into PS backbone did not lead to negative effect on the glass transition behavior of PS.     

Online Solid-Phase Extraction of Cd(II), Cu(II), and Co(II) Using Covalently Attached Bis(salicylaldimine) to Silica Gel for Determination in Food and Water by Flame Atomic Absorption Spectrometry

In this study, a novel sorbent material bearing a bis(aldimine) group was designed and successfully synthesized by covalently bonding a 2-[N,N′-bis(salicylaldimine)]aminoethyl amine ligand to the silica gel surface that was characterized by carbon, hydrogen, and nitrogen elemental analysis, thermogravimetric analysis, and the Fourier transform infrared spectroscopy technique. The sorbent was used for the online solid-phase extraction (SPE) of Cd(II), Cu(II), and Co(II) ions for their determination at trace concentration levels by flame atomic absorption spectrometry. The effective factors for the online SPE such as the pH and the flow rate of the sample solution, and type, volume, and flow rate of eluent were investigated. The concentration levels of Cd(II), Cu(II), and Co(II) were measured in certified reference materials including Virginia tobacco leaves (CTA-VTL-2) and water-trace elements (NWTM-15.2) to validate this method. The metal levels in environmental water were determined by this method, and the values were checked by spiking and recovery experiments and independent analysis by inductively coupled plasma-mass spectrometry. The adsorption capacities of the sorbent were found to be 41.2, 31.6, and 25.6?mg/g for Cd(II), Cu(II), and Co(II), respectively. This method was also successfully used for the determination of Cd(II), Cu(II), and Co(II) concentrations in rice and molasses.     

Studies on the Electrochemical Behavior of Bleomycin at a Co/GC Ion Implantation Modified Electrode and Its Application

In a 0. 10 mol/L HAc-NaAc buffer solution (pH = 4. 59), a sensitive reduction peak of bleomycin was observed by linear sweep voltammetry at a Co/GC ion implantation modified electrode. The peak potential was-0. 73 V(iw. SCE). The peak current was proportional to the concentration of bleomycin over the range of 5.0 × 10-8-1.0× 10-6 and 1.0× 10-6-1. 0 × 10-5 mol/L with a detection limit of 2.0 × 10-8 mol/L. The electrochemical behavior of the reduction peak of bleomycin at the Co/GC modified electrode was studied by linear sweep and cyclic voltammetry and applied to the determination of bleomycin in urine. This method is simple, rapid and reliable. The reduction process is quasi-reversible. The experiments of AES and XPS showed that Co was surely implanted into the surface of GCE and the depth distribution of Co was in good agreement with Gooses normal distribution; the implanted Co at GCE improved the electrocatalytic activity.     

脯氨酸Ni(Ⅱ)修饰电极的制备及对甲醇氧化的催化(英文)

研究了聚色氨酸修饰玻碳电极（Ｐｏｌｙ－Ｔｒｙ／ＧＣ）的制备,用循环伏安法探讨了膜的电化学性质。在ｐＨ＝６．６的ＰＢＳ中,膜的循环伏安图上有两对氧化还原峰。掺杂金属离子Ｎｉ（Ⅱ）后的该聚合物膜修饰电极（Ｐｏｌｙ－Ｎｉ（Ⅱ） Ｔｒｙ／ＧＣ）对甲醇的催化活性大大提高,在０．０１ ｍｏｌ／Ｌ ＮａＯＨ中甲醇的氧化峰电位在０．６５ Ｖ,而同样条件下在空白玻璃电极（ＧＣ）和Ｐｏｌｙ－Ｔｒｙ／ＧＣ上甲醇的氧化峰电位要正得多。在０．１５ ｍｏｌ／Ｌ甲醇溶液中循环伏安扫描１５０ ｍｉｎ后,峰电流密度由１０６０ μＡ／ｃｍ～２降低至８８５μＡ／ｃｍ～２,然后峰电流密度不再降低,说明在电催化氧化甲醇过程中电极稳定性良好。     

多壁碳纳米管-酰基吡唑啉酮复合膜修饰电极测定异烟肼

报道了一种修饰电极--多壁碳纳米管-酰基吡唑啉酮复合膜修饰玻碳电极(MWNTs/HPMαFP/GCE ),研究了异烟肼在此修饰电极上的电化学行为及反应机理.与裸GCE和MWNTs/GCE相比,异烟肼在MWNTs/HPMαFP/GCE上的氧化峰电流和检测灵敏度大大提高,表明多壁碳纳米管和酰基吡唑啉酮产生了协同增效作用.在...