Voltammetric Behavior of the Alizarin Red S Interaction with DNA and Damage to DNA

The electrochemical behavior and the interaction of alizarin red S (ARS) with calf thymus DNA was investigated on a bare glassy carbon electrode (GCE) and DNA modified GCE (DNA/GCE), respectively. ARS showed a pair of redox peaks at ?0.445 V and ?0.414 V on a bare GCE. On addition of DNA into the ARS solution, the peak current of ARS decreased and the peak potential positively shifted, but without new redox peaks appeared. The ARS reduction peak current increased with immersion time on a DNA/GCE. The results showed that ARS could interact with DNA molecules by intercalative binding mode. The equilibrium constant, binding number and the ratio of binding constant for oxidized and reduced ARS forms were obtained. The DNA damage was directly detected by appearance of guanosine and adenosine bases oxidation signal. The influence of experimental conditions on DNA damage extent was discussed in detail.     

Ion Recognition and Analytical Application of a Fibroin Modified Electrode

A novel fibroin modified electrode with ion recognition was reported. The membrane with isoelectric point of pH 4.5, was modified on graphite and carbon fiber electrodes. The pH-responsive ion recognition of the modified electrode was investigated by use of some neurocompounds. The fibroin carbon fiber electrode has been used for in-vivo determination.     

从自模式曲线分辨到渐进类因子分析法

本文对自模式曲线分辨法的发展作了简要回顾，其中特别对近来来迅速发展的一类用于色谱波谱联用仪产生的二维分析数据的渐进类分析法作了详尽的讨论。这些新化学计量学方法的涌现，对复杂的未知分析体系的定性定量分析，将带来深刻的变化。     

Influence of hydrophobe content on the solution rheology of hydrophobically modified terpolymer of SO2, N,N-diallyl-N-carboethoxymethylammonium chloride

Rheological properties of hydrophobically modified copolymer of SO₂, N,N-diallyl-N-carboethoxymethylammonium chloride and the hydrophobic monomer N,N-diallyl-N-octadecylammonium chloride were studied. The influence of hydrophobe content (HP) and polymer concentration was investigated. Polymers with HP content in the range 1.5-5% were examined and the concentration was varied in the range 2-5 wt%. Both dynamic and steady-shear experiments were performed in ARES rheometer. Copolymers were observed to exhibit typical viscoelastic behavior even with low HP content. Both the dynamic viscosity, η′ and storage modulus, G′, increase with the increase of both the polymer concentration and the HP content of the system. The viscosity of the high HP content polymer showed a strong shear dependency, while G′ was a weak function of frequency and gel-like behavior was observed. The zero-shear viscosity, η₀, showed a strong concentration dependency (η₀ ∼ ?^α; 1.1 < α < 5.9). The concentration dependency of η₀ suggests that intermolecular association is dominant in the high HP content polymer. Control of the HP content and polymer concentration of this class of polymers can lead to a wide range of interesting rheological properties.     

Hepatobiliary excretion and brain distribution of caffeine in rats using microdialysis

To investigate the pharmacokinetic mechanism of hepatobiliary excretion and brain distribution of caffeine, this study uses a method based on microdialysis technique and liquid chromatography that allows continuous and concurrent in vivo monitoring of extracellular caffeine in the blood, brain and bile of anesthetized rats following the administration of caffeine (3 or 10 mg/kg, i.v.) through the femoral vein. Dialysates of the blood, brain and bile were directly injected onto the liquid chromatographic system and no further clean-up procedures were required. The study design consisted of two groups of six rats in parallel: the rats of the control group received caffeine (3 or 10 mg/kg, i.v.) alone and those of the cyclosporine treated-group were injected cyclosporine (10 mg/kg, i.v.) 10 min prior to caffeine administration (3 or 10 mg/kg, i.v.). The decline of caffeine in the blood, brain striatum and bile suggested that caffeine had rapid exchange and equilibration between the peripheral compartment and the central nervous system. In addition, the results indicated that caffeine underwent hepatobiliary excretion and was distributed into brain. When cyclosporine was co-administered, the pharmacokinetic parameters were not significantly altered. The results of this study reveal that the pharmacokinetic mechanism of hepatobiliary excretion and brain distribution of caffeine might not relate to P-glycoprotein.     

同多酸和杂多酸修饰微电极的电化学研究 Ⅶ.磷钒钼杂多酸薄膜修饰微电极和杂多酸/聚苯胺薄膜修饰微电极的制备和电化学性质

本文详细描述了磷钒钼杂多酸（PV2Mo10）极薄膜修饰碳纤维（CF）微电极和PV2Mo10／聚苯胶（PAn）薄膜修饰微电极的制备及其电化学性质。     

Voltammetric Determination of Trace Amounts of Fenitrothion on a Novel Nano-TiO2 Polymer Film Electrode

A novel nano-TiO₂ polymer modified glassy carbon (GC) electrode was developed for the determination of an organophosphorous pesticide, fenitrothion (-NO₂), in citrate buffer solution. The electrochemical behavior of fenitrothion was characterized by using cyclic voltammetry. An irreversible form, -NO₂, was transformed into a reversible redox couple (-NHOH/-NO), and it can be used to determine trace fenitrothion by square wave voltammetry. The experimental parameters, such as film thickness, pH value, accumulation potential and time were optimized. Interestingly, a cyclic voltammetric scan was observed to be more effective than a constant potential for the accumulation of fenitrothion. A linear response over a fenitrothion concentration of 2.5×10^–8 to 1.0×10^–5M was exhibited, with a detection limit of 1.0×10^–8M (S/N=3). The high sensitivity and selectivity of this film electrode was demonstrated by its practical application to the determination of trace amounts of fenitrothion in lake water and apple samples.     

Simultaneous Determination of Aromatic Amines by Liquid Chromatography Coupled with Carbon Nanotubes/Poly (3-methylthiophene) Modified Dual-Electrode

Liquid chromatography with amperometric detection (LC-AD) is developed and applied to simultaneously determine five aromatic amines. In the LC-AD, a new carbon nanotubes/poly(3-methylthiophene) modified dual-electrode is fabricated and then used as the working electrode. It is found that this chemically modified electrode (CME) exhibits efficiently electrocatalytic oxidation for aromatic amines with relatively high sensitivity, stability and long-life. Thus, lower detection in LC-AD can be achieved, which are 4.0 × 10^–8 mol L^–1 for aniline, 1.6 ×10^–7 mol L^–1 for 4-nitroaniline, 1.0 × 10^–7 mol L^–1 for 4-chloroaniline, 1.5 × 10^–7 mol L^–1 for 1-naphthylamine, 1.7 × 10^–7 mol L^–1 for 2-bromoaniline. The recoveries of the five analytes are also determined, which range between 0.95 and 1.05 for drinking water, 0.86 and 1.10 for the LiWa River water.     

Rheology of asphalts modified with glycidylmethacrylate functionalized polymers

Asphalt is known to be a colloidal suspension in which asphaltenes are covered by a stabilizing phase of polar resins and form complex micelles that are dispersed in the oily maltenic phase. In order to enhance its mechanical properties (e.g., in road paving), asphalts are often loaded with polymeric materials, thereby obtaining blends that can have different physical or chemical structures, depending on the composition of the added polymer. Asphalts modified by the addition of reactive ethylene terpolymers were prepared and their dielectric and rheological properties were measured both before and after a cure at high temperature. Even if it is not possible to determine the exact nature of the chemical interactions between asphalt and polymer, master curves obtained from dynamic data clearly show that during the cure the material tends to the behavior of a cross-linked network.     

TG and DSC studies of filled porous copolymers

A complex approach including thermogravimetry, differential thermal analysis and differential scanning calorimetry was applied to study characteristics of non-filled and filled porous copolymers of divinylbenzene with styrene or some acrylic monomers: di(methacryloyloxymethyl)naphthalene, methacrylic ester of p,p’-dihydroxydiphenylpropane diglycidyl ether, and dimethacrylglycolethylene. High disperse silicas with the grafted methyl and silicon hydride groups in the surface layer were used as fillers. The kinetic parameters of thermal degradation for composites obtained were determined by different methods.