A study of the structure of G-P zones in Ti-rich TiNi shape memory melt-spun ribbons

A hybrid structure composed of ordered C11_b Ti₂Ni and Ti₅Ni₃ substructures for the G-P zones precipitated in Ti-rich Ti–Ni shape memory ribbons is proposed to explain the appearance of extra diffuse scattering streaks in transmission electron microscopy observations. The point defects of Ni vacancies and Ti antisites, resulting in the lattice fluctuant displacement, also cause the incommensurate extra diffuse scattering streaks.     

Optimum Temporal Pulse Shape of Launched Light for Optical Time Domain Reflectometry Type Sensors Using Brillouin Backscattering

We investigated numerically the relationship between the temporal shape of an optical pulse launched into an optical fiber and the power spectrum of the Brillouin backscattered light it produces. We analyzed the measurement error of the peak-power frequency of the Brillouin backscattered light power spectra obtained from the launched light with various pulse shapes. In this investigation and analysis, we characterized the pulse shape by the width, leading-trailing time, and steepness. Regardless of the launched pulse shape, the peak-power frequency-measurement error increases as the pulse width shortens. For identical launched pulse widths, a triangular pulse generates the Brillouin backscattered-light power spectrum with both the narrowest profile and the largest peak power, and consequently provides the minimum error when we measure the peak-power frequency. This shows that a temporally triangular pulse is the best for the launched light.     

Analysis of the alterations in porosity features of some natural stones due to thermal effect

Three types of commercially available carbonate rocks were used in the study to determine the effect of thermal treatment in the range from 100 °C to 500 °C on porosity features in terms of two different approaches such as pore shape factor and quality index values. The ratio of the ultrasonic velocity measurements before and after water saturation was used to differentiate porosity of pores from porosity of cracks under varying temperatures. It was found that, pores in Burdur Beige and Usak White are in the form of cracks, which are situated through inner structure. On the other hand, pores in Patara Limestone are in the form of porosity with lower pore shape factor values. Quality index calculation is another approach based on the comparison of the measured and theoretical ultrasonic velocity values. When the rocks were subjected to higher temperatures, internal stress was developed, crack lengths and numbers were increased and finally the higher pore shape factor and lower quality index values were obtained. This situation was proven by the higher water absorption values for all the stone types with the higher pore shape factor and lower quality index values depend on the noticeable increase in effective porosity values.     

102Ru核振动到转动演化的微观研究

基于微观sdIBM-2方案和实验单粒子能量值, 在最普遍的哈密顿量下, 用两组不同的核子-核子等效相互作用参数, 分别很好地再现了¹⁰²Ru核的振动带能谱和转动带能谱及其演化过程. 微观和唯象的研究指认: 1) 这两种激发模式的共存区是能态8⁺₁—12⁺₁(即E_x=2.500—4.000 MeV); 态 8⁺_{1关键词： 微观sdIBM-2方案 形状演化 玻色子 102Ru核')" href="#">¹⁰²Ru核}     

Annealing effect on phase transformation in nano structured Ni–Mn–Ga ferromagnetic shape memory alloy

Nano structured Ni_52.6Mn_23.7Ga_24.3 alloy was prepared using the ball milling technique. High martensitic transition temperatures are observed in the range between 336 and 367 K. The X-ray diffraction profile revealed that annealed Ni–Mn–Ga powder at 1073 K displays mixture phases of austenite and martensite. Annealing at 1173 K induces phase transformation from mixture phase to Heusler L2₁ structure, which confirms the high-temperature shape memory effect. On the contrary, the milled sample shows no evidence of shape memory effect. Furthermore, annealing at higher temperature (1273 K) shows the accumulation of oxidation, which leads to the loss of shape memory effect. The grain size increases with increasing annealing temperature and causes deterioration in the soft magnetic properties.     

A novel design of membrane mirror with small deformation and imaging performance analysis in infrared system

A method of diminishing the shape error of membrane mirror is proposed in this paper. The inner inflating pressure is considerably decreased by adopting the pre-shaped membrane. Small deformation of the membrane mirror with greatly reduced shape error is sequentially achieved. Primarily a finite element model of the above pre-shaped membrane is built on the basis of its mechanical properties. Then accurate shape data under different pressures can be acquired by iteratively calculating the node displacements of the model. Shape data are applicable to build up deformed reflecting surfaces for the simulative analysis in ZEMAX. Finally, ground-based imaging experiments of 4-bar targets and nature scene are conducted. Experiment results indicate that the MTF of the infrared system can reach to 0.3 at a high spatial resolution of 10l p/mm, and texture details of the nature scene are well-presented. The method can provide theoretical basis and technical support for the applications in lightweight optical components with ultra-large apertures.     

Three dimensional accurate morphology measurements of polystyrene standard particles on silicon substrate by electron tomography

Polystyrene latex (PSL) nanoparticle (NP) sample is one of the most widely used standard materials. It is used for calibration of particle counters and particle size measurement tools. It has been reported that the measured NP sizes by various methods, such as Differential Mobility Analysis, dynamic light scattering (DLS), optical microscopy (OM), scanning electron microscopy (SEM) and atomic force microscopy (AFM), differ from each other. Deformation of PSL NPs on mica substrate has been reported in AFM measurements: the lateral width of PSL NPs is smaller than their vertical height. To provide a reliable calibration standard, the deformation must be measured by a method that can reliably visualize the entire three dimensional (3D) shape of the PSL NPs. Here we present a method for detailed measurement of PSL NP 3D shape by means of electron tomography in a transmission electron microscope. The observed shape of the PSL NPs with 100 nm and 50 nm diameter were not spherical, but squished in direction perpendicular to the support substrate by about 7.4% and 12.1%, respectively. The high difference in surface energy of the PSL NPs and that of substrate together with their low Young modulus appear to explain the squishing of the NPs without presence of water film.     

Determining the micro-optical element surfaces profiles using transmission deflectometry with liquids

We propose a method for simultaneously measuring the front and back surface profiles of transparent optical components. The proposed method combines dual wavelength transmission deflectometry with liquids to record distorted phases at different wavelengths, and then numerically reconstructs the three-dimensional phase information to image the front and back surfaces of the lens. We propose a theoretical model to determine the surface information, and the imaging of achromatic lenses is experimentally demonstrated. Unlike conventional transmission deflectometry, our proposed method supports direct observation of the front and back surface profiles of the optical elements. Compared with other techniques such as interferometry, the proposed setup is simpler to align, has lower cost, and does not require coherent illumination. The proposed method can be applied to normal transmission deflectometry for determining the three-dimensional surface profiles of optical components.