Evaluation of a complete HPLC solvent optimization system involving piece-wise quadratic modelling

Summary Interpretive methods are accepted to give the best possible results for selectivity optimization in HPLC. However the methods are very complex, and most work so far has been detailed academic studies. This paper describes an evaluation of a complete integrated system incorporating peak labelling, modelling of retention behaviour and calculation of response surfaces, with particular emphasis on the retention modelling. The peak labelling section has been discussed previously.A piece-wise quadratic function is investigated for the modelling of retention times across an isoeluotropic plane to effect selectivity optimization in HPLC. This requires 10 data-points on the isoeluotropic plane. The predicted global optimum and local optima are evaluated by comparison of calculated and experimental retention data, for a nine component sample. Seven interstitial points, distributed across the whole plane between the data-points, are similarly evaluated for a related sample. The typical error (in retention time) is less than 2%, often 1%, and the maximum error is 4.2%. At the global optimum the error was found be less than 1.3% for all 9 peaks.     

Production of N,H, and NH active species in N2-H2 dc flowing discharges

Densities of N, H, and NH active species have been detected by laser-induced fluorescence (LIF) in N₂-xH₂ dc flowing discharges. A peak value of N atom densities far x = 0.2–0.5% and a plateau value of H atom densities between x = 1% and 90% in post-discharge conditions (0.05 sec, p = 2 torr) has been found. Comparison between LIF measurements of N atoms and the trend of the N₂(B, v = II) population shows that the emission from this state can be used for monitoring N atoms. The NH radical has only been detected inside the discharge region.On leave from Instituto Tecnológico de Aeronáutica, CNPq, Brazil.     

Volumetric Properties of Ternary-Pseudobinary Mixtures Containing Benzene and Cyclohexane

Densities have been measured as a function of composition for ternary-pseudobinary mixtures of [(benzene + toluene or methylcyclohexane) + (cyclohexane + toluene or methylcyclohexane)] by means of a vibrating-tube densimeter at atmospheric pressure and the temperature 298.15 K. The excess molar volumes, V_m^E, were calculated from the densities and correlated using the Redlich–Kister equation to estimate the coefficients and standard errors. The experimental and calculated quantities are used to discuss the mixing behavior of the components. The results show the third component, toluene and methylcyclohexane, influences the interaction between benzene and cyclohexane.     

Modelling Dynamics of Amperometric Biosensors in Batch and Flow Injection Analysis

A mathematical model of amperometric biosensors has been developed. The model is based on non-stationary diffusion equations containing a non-linear term related to Michaelis–Menten kinetic of the enzymatic reaction. Using digital simulation, the influence of the substrate concentration as well as maximal enzymatic rate on the biosensor response was investigated. The digital simulation was carried out using the finite difference technique. The model describes the biosensor action in batch and flow injection regimes.     

Towards the development of multisensor for drugs of abuse based on molecular imprinted polymers

The synthetic receptors for cocaine, deoxyephedrine, methadone and morphine were computationally designed and produced using molecular imprinting. The structure and energy of the molecular complexes were analysed by computational techniques. The possible structures of the binding sites in the synthetic receptors have been compared with those of corresponding natural receptors. The composition of imprinted polymers was optimised to allow adequate performance under the same experimental conditions. All selected molecular imprinting polymers (MIPs) demonstrated stronger affinity in comparison with corresponding blank polymers resulting in imprinted factors (I) equal to 1.2 (cocaine), 2.5 (deoxyephedrine), 3.5 (methadone) and 3 (morphine) which suggested that the specific binding site for each molecule was successfully created. The polymers studied possessed good selectivity and affinity towards their templates and could be recommended for the integration with sensor devices. From a practical point of view, especially for multisensor requirements, the synthetic receptors based on imprinted polymers could be superior to natural receptors due to their stability, robustness and compatibility with automation processes required for sensor fabrication.     

Interactions between naproxen and maltoheptaose,the non-cyclic analog ofβ-cyclodextrin

The crystallinity of naproxen in solid combinations with amorphous maltoheptaose, the non-cyclic analog of -cyclodextrin, was assessed using differential scanning calorimetry supported by X-ray powder diffractometry. Cogrinding induced a decrease in drug crystalinity to an extent which depended on the grinding time, and was most pronounced for the combination of equimolecular composition. Thermal analysis showed that the mechanism behind the conversion of crystalline naproxen into the amorphous state by cogrinding with maltoheptaose differed from that with randomly substituted, amorphous -cyclodextrins. Interactions of naproxen with maltoheptaose in aqueous solution were studied by means of fluorescence spectroscopy, phase-solubility analysis, and computeraided molecular modelling. Maltoheptaose can wrap up naproxen, taking on a cyclic conformation and forming a pseudo inclusion complex (apparent binding constant K_{1: 1} = 1.0 × 10³ (–20%) L mol^–1 at 25 °C) which is about as stable as the true inclusion complex with -cyclodextrin in the lowest temperature range (0-100 K). A better complexing ability for naproxen in terms of binding constant values, however, was displayed by both native and derivatized -cyclodextrins, the hosts with covalently-bound cyclic structures.     

A view and a review of the melting of alkali metal halide crystals

Summary A representational model, proposed to account for the physical changes that accompany the melting of alkali halides, was described in Part 1 [1]. The liquid is portrayed as undergoing continual dynamic structural reorganization of its constituent ions between individual small domains, zones of various regular, crystal-type arrays. These alternative arrangements are stabilized by the enthalpy of melting, which, in liquids, relaxes the restriction for solids that only the single, most stable, crystal structure can be present. The dynamic character of the melt accounts for its fluid character and the loss of long-range order [1, 2]. This model is extended here to consider the phase diagrams of binary, common ion, alkali halide mixtures comprehensively reviewed in [3]. Factors determining whether each of these yields a eutectic, or a solid solution, on cooling are discussed and several trends in the 70-phase diagrams are identified. Eutectic formation, involving maintenance of the liquid state below the melting points of the pure components, is ascribed to the participation, in an extended dynamic equilibrium, of additional domains having the regular structures characteristic of double salts. The known crystalline double binary halides [3], Li/Cs or Rb/F, Cl, Br or I, melt at temperatures well below those of the simpler pure component salts. It is concluded that the set/liq model for melting, proposed in [1, 2], accounts for some important properties of the phase diagrams presented in [3].     

Influence of the heating conditions on the thermal and chemical behaviour of solid particles undergoing a fast endothermic decomposition

This paper deals with models describing the thermal and chemical behaviour of solid particles undergoing fast endothermic reactions under the influence of an external heat flux. The heat source temperature is supposed to be constant, to increase with time, or to deliver a simple thermal flash. It is shown that the pyrolysis conditions (reaction temperature, conversion, etc.) depend on the chemical characteristics of the reaction and also to a large extent on the external heating conditions. Relationships are proposed to take into account these parameters. The results are applied to the thermal decomposition of NaHCO₃. The pyrolysis of cellulose is finally chosen in order to show how these operating parameters can also affect the selectivity of a more complex reaction.     

Chemical equilibrium model for the thermodynamic properties of mixed aqueous micellar systems: Application to thermodynamic functions of transfer

Mixed micelles can be formed in water between various pairs of hydrophobic solutes such as surfactants, alcohols and hydrocarbons. These systems can often be studied through the thermodynamic functions of transfer of one of the solutes, usually kept near infinite dilution, from water to an aqueous solution of the other solute. When mixed micelles are formed, these functions change significantly, and often go through extrema, in the region where the binary system micellizes or undergoes some microphase transition.Three main effects are responsible for the observed trends: pair-wise interactions between both solutes in the monomeric form, a distribution of the reference solute between the aqueous and micellar phases and a shift in the monomer-micelle equilibrium in the vicinity of the reference solute. Simple equations can be derived for these three effects which can account for the sign and magnitude of the observed trends using parameters which are derived for the most part from the two binary systems.     

Pervaporative transport modelling in a ternary system: ethyltertiarybutylether/ethanol/polyurethaneimide

The study deals with the analysis of diffusion and mass transfer modelling during pervaporation in a true ternary system involving a polar liquid mixture (ETBE/EtOH) and a polar block copolymer (polyurethaneimide or PUI). A survey of methods of pervaporative transfer modelling in ternary systems is first developed. From differential permeation experiments carried out with both pure liquids, it appears that both permeants obey a Fickian law. Moreover, the diffusional behaviour is consistent with Long's model, which has thus been assumed for the related ternary system. An extension of the Brun's model is then derived, which takes into account the diffusion coupling as well the significant deviation from sorption ideality. From a practical point of view, the calculated values of fluxes show generally good agreement with the experimental results, although a small deviation occurs for mixtures of low ethanol content. Diffusion coefficients of both pure solvents corresponding to transient or steady state are compared. A very good agreement is found for the aprotic permeant (ETBE). whereas the diffusion coefficient of ethanol in transient state is only the quarter of the value corresponding to steady state. The results are discussed in comparison with related investigations in the literature, involving specific liquid-polymer interactions.