Hydrolysis and Condensation of Transition Metal Alkoxide: Experiments and Simulations

We present here an experimental and numerical study of the chemical and aggregative mechanisms for titanium alkoxide in a reverse micellar medium. NMR experiments were done to study the first step of the sol-gel process: hydrolysis of titanium isopropoxide. Light and X-ray scattering experiments were then conducted to characterize the clustering of aggregates and aggregation kinetics. Fractal dimension, measured by U.S.A.X.S., varies with the hydrolysis ratio and the hydration of the surfactant. This evolution was explained by polydispersity of the hydrolysis which depends on the surfactant concentration. This hypothesis was tested through a numerical simulation of irreversible aggregation using a chemically limited aggregation model. The hydrolyzed sites are distributed among the monomers by a random procedure governed by a polydispersity parameterp, varying from 0 to 1. The total number of hydrolyzed sites is governed by a parameterq belonging to the interval [0, 1]. Thep-q evolution of the fractal dimension coincides rather well with the experimental data in all the region of the two dimensional phase space.     

Dynamics studies on thermoresponsive poly(<Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide) hydrogel in tetrahydrofuran/water mixtures

The properties of thermoresponsive poly(N-isopropylacrylamide) (PNIPAAm) hydrogel in tetrahydrofuran/H₂O mixtures were studied. Scanning electron microscopic (SEM) images demonstrate that the hydrogel changes from homogeneous to heterogeneous microstructure upon the addition of tetrahydrofuran to water. This heterogeneous PNIPAAm hydrogel in the mixture solvent exhibits a very slow response rate at temperatures above its lower critical solution temperature. The decreased response rate is attributed to the formation of special ternary complexes including the polymer and the two solvents in the tetrahydrofuran/H₂O mixture. Factors controlling the thermoresponse rate are discussed further and several suggestions are provided for designing and developing fast-response PNIPAAm hydrogels in the future.     

Compatibility Studies of Multicomponent Tablet Formulations. DSC and experimental mixture design

An experimental mixture design was applied to a differential scanning calorimetry (DSC) study performed to evaluate naproxen compatibility in tablet formulations consisting of four classic excipients (sorbitol, sodium carboxymethylcellulose, poly(ethylene glycol) 20000 and Veegum) each in adequate concentration ranges accounting for the relevant values actually used in pharmaceutical formulations. Twenty-seven different tablets were obtained from as many mixtures prepared according to the experimental design plan and analyzed in a random order by DSC. Statistical evaluation of experimental data enabled correlation of both enthalpy and onset temperature variations of drug melting endotherm (selected as responses indicative of the presence of drug-excipient interactions) with the mixture composition. Variance analysis (Anova) confirmed the reliability of the postulated polynomial model in providing adequate prediction of true system behaviour. This revised version was published online in August 2006 with corrections to the Cover Date.     

A self-diffusion study of poly(ethylene-oxide) alkyl alcohols

The self-diffusion coefficients of HDO and some surfactants in aqueous mixtures at different concentrations, below the critical micelle concentration, have been determined by means of the NMR, spin-echo pulsed field gradient method. The surfactant solutes chosen were ethylene glycol-pentyl alcohol (diethylene glycolpentylalcohol, ethylene glycol-hexyalcohol, diethylene glycol-hexyl alcohol, triethylene glycol-hexyl alcohol, tetraethylene glycol-hexyl alcohol, pentaethylene glycol-hexyl alcohol). The interactions in solution are studied by analyzing the solute self-diffusion coefficients extrapolated to infinite dilution. These values are compared with those of 1-alkanols. The slope of the self diffusion coefficientsvs. the solute concentration are correlated with the microscopic friction coefficients. A model for interpreting the experimental data is suggested.     

Dielectric studies of binary mixtures of n -propyl alcohol and ethylenediamine

Dielectric constant (ε’) and dielectric loss (ε") of n-propyl alcohol (PA), ethylenediamine (EDA) and their binary mixtures, for different mole fractions of ethylenediamine have been experimentally measured at 11.15 GHz microwave frequency. Values of density (ρ), viscosity (η) and square refractive index (n _D ² ) of binary mixtures as well as those of pure liquids are reported. Excess square refractive index, viscosity and activation energy of viscous flow have also been estimated. These parameters have been used to explain the formation of complexes in the system.     

A model for the etching of Si in CF4 plasmas: Comparison with experimental measurements

A model has been developed to describe the chemistry which occurs in CF₄ plasmas and the etching of Si both in the plasma and downstream. One very important feature of this model is that for discharge residence times which vary by more than an order of magnitude, the amount of CF₄ consumed is low and relatively constant. This is because the gas-phase combination reactions between F and both CF₃ and CF₂ lead to the rapid reforming of CF₄. The model predicts that CF₂ is a major species in the gas phase and that the [F] detected as a sample point downstream is a very sensitive function of [CF₂]/[F] in the discharge. Even though the calculations show that [F] in the discharge varies only slightly over the wide range of experimental conditions considered, large variations in [F] at the sample point occur because the [CF₂]/[F] ratio in the discharge changes. The concentrations of C₂F₆ and SiF₄ are predicted to within a factor of 2 over a very wide range of experimental conditions. This confirms the importance of gas-phase free radical reactions in the etching of Si.     

Computational Modelling of the Behaviour of Potentiometric Membrane Biosensors

This paper presents a mathematical model of a potentiometric biosensor based on a potentiometric electrode covered with an enzyme membrane. The model is based on the reaction–diffusion equations containing a non-linear term related to theMichaelis–Menten kinetics of the enzymatic reaction. Using computer simulation the influence of the thickness of the enzyme membrane on the biosensor response was investigated. The digital simulation was performed using the finite difference technique. Results of the numerical simulation were compared with known analytical solutions.      

Excess Molar Volume and Viscosity of Isobutyric Acid + Water Binary Mixtures Near and Far Away from the Critical Temperature

The excess molar volume V^E, shear viscosity deviation Δη and excess Gibbs energy of activation ΔG^∗E of viscous flow have been investigated by using density (ρ) and shear viscosity (η) measurements for isobutyric acid + water (IBA+W) mixtures over the entire range of mole fractions at five different temperatures, both near and close to the critical temperature (2.055K ≤ (T−T_c)≤ 13.055K). The results were also fitted with the Redlich–Kister equation. This system exhibited very large negative values of V^E and very large positive values of Δη due to increased hydrogen bonding interactions and correlation length between unlike molecules in the critical region and to very large differences between the molar volumes of the pure components at low temperatures. The activation parameters ΔH^∗ and ΔS^∗ have been also calculated and show that the critical region has an important effect on the volumetric properties.     

Ion-Pair Solvent Extraction of EDTA Anions with Tetraalkylammonium Ions in Various Organic Solvents

Summary.  The ion-pair solvent extraction behavior of ethylenediaminetetraacetate (EDTA) anion by various tetraalkylammonium ions was investigated at 25.0 ± 0.1°C. The extraction of EDTA exceeded 90% from the basic aqueous solution into the organic solvents such as n-hexane and benzene derivatives containing tri-n-octylmethylammonium chloride, but EDTA was hardly extracted from acidic solution. Among the chemical species of EDTA in aqueous solution, edta ⁴⁻ is the most extractable one. On the other hand, the extraction of EDTA was less than 1% into chloroform and 1,2-dichloroethane even from the basic aqueous solution. The effect of the structure of alkylammonium ion was also examined. Tetra-n-hexylammonium and tetra-n-octylammonium ions could not extract EDTA even from the basic aqueous solution, while the use of tri-n-octylmethylammonium and di-n-lauryldimethylammonium ions enhances the extraction of EDTA. These results suggest that the steric hindrance in the ion-pair of alkylammonium and EDTA anion in the organic phase affects the extractability of EDTA containing ion-pair. The solution structure of ion-pair in the organic phase was calculated by MMFF force field and the steric effect in the ion-pair was also suggested. From the extraction constants obtained, the possibility of the extraction separation of EDTA has been shown. Present address: Chemistry Department, Heilongjiang University, Harbin, China     

天然和人工培植红景天挥发油的对比研究

应用ＧＣ－ＭＳ和ＧＣ－ＩＲ两种联机法对比研究了天然和人工培植红景天挥发油、分别鉴定出２７个和２４个化合物。ＭＳ给出结构信息和ＩＲ给出官能团信息相结合，提高了分析测试复杂样品的可靠性。