High-efficiency absorption of low NOX concentration in metallurgical flue gas using a three dimensional printed large-flow microstructured reactor

In the process of nitric acid dissolving precious metals, a large amount of NOx exhaust gas will be produced. This research aims at the development of a new method for the removal of low-concentration nitrogen oxides from metallurgical flue gas. In this process, a printed three-dimensional large-flow microstructure reactor and urea solution are used for the removal of NOx, which facilitates the greater efficiency of denitrification(≥94%). Urea plays an important role in the redox of NO₂, such as NO₂ is reduced to N₂ in solution. Both the gas and the liquid phase simultaneously react in the microchannels of the microfluidic reactor. The channels allow the proper mixing of urea and NaClO₂ during the flow which efficiently removes NO_x at low concentrations. The optimum condition for high denitration efficiency is outlined: the urea solution with 3%,temperature of the mixed solution is 293.15 K, gas–liquid flow mass ratio is 1:1, pH value (8.0–10.0), C_NaClO2 = 0.02 mol/L. This work successfully describes the use of a microfluidic reactor to enhance and maintain the denitration efficiency. This work describes how to successfully enhance and maintain the denitration efficiency while using a printed three-dimensional large-flow microstructure reactor.     

信息化时代物理化学课程的教学改革与实践

互联网的发展加速了信息和知识的传播,在为大学课程教学提供更多资源的同时也给传统的课堂教学方法带来很大挑战。介绍了北京师范大学物理化学教学团队在线上线下混合教学方法的创立、大规模在线开放课程（MOOC）建设、思政元素引入教学等方面利用互联网资源所实施的教学改革和实践,为探究和建立信息时代大学化学课程教学方法的新模式提供参考。     

基于生物炭的高级氧化技术降解水中有机污染物

碳基材料催化剂因具有良好的催化性能,同时可避免金属催化剂的重金属沥出造成的二次污染问题,常被应用于高级氧化领域。其中,以废弃生物质为原材料热解产生的生物炭,不仅具有催化潜力,还具有低成本和绿色环保等优势,被广泛用于活化过氧化氢、过一硫酸氢盐和过二硫酸盐等过氧化物降解水中有机污染物。本文介绍了生物炭的前体种类和制备方法、阐述了二者对生物炭活化能力的影响,总结了生物炭活化过氧化物的机理,分析了水质对降解污染物的影响,综述了生物炭的改性、循环使用及再生,指出了这一技术存在的问题并对后续研究进行了展望。     

Interpretation of Auger depth profiles of thin SiC layers on Si

Silicon carbide thin films, prepared by carbonization of Si-wafers are analysed by Auger depth profiling. The influence of atomic mixing is simulated with a Monte Carlo model. By using mixing simulations the dependence of the two mixing parameters (width of the mixing zone and recoil depth) on ion beam energy, incidence angle and ion mass can be calculated. For comparison of the simulated data with Auger measurements an Auger electron escape depth correction is necessary. The simulated and -corrected data of several layer structures show good qualitative agreement with Auger depth profiles of thin carbonized SiC-layers.Dedicated to Professor Dr. rer. nat. Dr. h.c. Hubertus Nickel on the occasion of his 65th birthday     

The application of the concept of reaction layer to the study of electrode processes coupled with the second-order chemical reactions at microelectrodes under steady-state conditions

Under steady-state conditions, the current equations of the second-order EC, ECE and DISPI reactions at microdisk, microspherical and microring electrodes are derived with the aid of the concept of the reaction layer. The conditions under which these equations would be valid are also discussed. Using these equations, methods to determine the kinetic parameters for the second-order EC, ECE and DISPI reactions are presented. The reduction of 2,6-diphenyl-pyrylium cation and oxidation of triphenylamine were investigated as examples of the second-order EC and ECE reactions.     

Continuous chromatographic separation process: simulated moving bed allowing simultaneous withdrawal of three fractions

Continuous counter-current chromatographic separation has been carried out in a simulated moving bed system (SMB). We have worked with a SMB pilot plant (8 columns, 4.4 litres of resin each) which allows the continuous withdrawal of two different fractions. A mixture of glucose-fructose has been separated. To calculate the concentration profile within the separator an axial dispersed plug flow model and an equilibrium stage model have been employed; software has been created to simulate the behaviour of the separator. The necessary parameters of the mode: the adsorption equilibrium constant, the height equivalent to a theoretical plate and the bed voidage, have been acquired experimentally from elution chromatography measurements. The results calculated by simulation give a good representation of the experimental concentration profiles; other separations like xylitol-arabitol have been simulated. The influence of some factors like desorbent flow-rate, feed flow-rate and the bed voidage have been studied using the software. Once the system has worked in a two withdrawal way, an extension of the pilot plant has been constructed so as to obtain a third one. The necessary parameters of the three withdrawal model will be studied.     

Water Formation in Non-Hydrolytic Sol–Gel Routes: Selective Synthesis of Tetragonal and Monoclinic Mesoporous Zirconia as a Case Study

Several non-hydrolytic sol–gel syntheses involving different precursors, oxygen donors, and conditions have been screened aiming to selectively produce mesoporous t-ZrO₂ or m-ZrO₂ with significant specific surface areas. The in situ water formation was systematically investigated by Karl Fisher titration of the syneresis liquids. XRD and nitrogen physisorption were employed to characterize the structure and texture of the ZrO₂ samples. Significant amounts of water were found in several cases, notably in the reactions of Zr(OnPr)₄ with ketones (acetone, 2-pentanone, acetophenone), and of ZrCl₄ with alcohols (benzyl alcohol, ethanol) or acetone. Conversely, the reactions of Zr(OnPr)₄ with acetic anhydride or benzyl alcohol at moderate temperature (200 °C) and of ZrCl₄ with diisopropyl ether appear strictly non-hydrolytic. Although reaction time and reaction temperature were also important parameters, the presence of water played a crucial role on the structure of the final zirconia: t-ZrO₂ is favored in strictly non-hydrolytic routes, while m-ZrO₂ is favored in the presence of significant amounts of water. ¹H and ¹³C NMR analysis of the syneresis liquids allowed us to identify the main reactions responsible for the formation of water and of the oxide network. The morphology of the most interesting ZrO₂ samples was further investigated by electron microscopy (SEM, TEM).     

A Photoionization Reflectron Time-of-Flight Mass Spectrometric Study on the Detection of Ethynamine (HCCNH2) and 2H-Azirine (c-H2CCHN)

Ices of acetylene (C₂H₂) and ammonia (NH₃) were irradiated with energetic electrons to simulate interstellar ices processed by galactic cosmic rays in order to investigate the formation of C₂H₃N isomers. Supported by quantum chemical calculations, experiments detected product molecules as they sublime from the ices using photoionization reflectron time-of-flight mass spectrometry (PI-ReTOF-MS). Isotopically-labeled ices confirmed the C₂H₃N assignments while photon energies of 8.81 eV, 9.80 eV, and 10.49 eV were utilized to discriminate isomers based on their known ionization energies. Results indicate the formation of ethynamine (HCCNH₂) and 2H-azirine (c-H₂CCHN) in the irradiated C₂H₂:NH₃ ices, and the energetics of their formation mechanisms are discussed. These findings suggest that these two isomers can form in interstellar ices and, upon sublimation during the hot core phase, could be detected using radio astronomy.     

Radiochemistry,Production Processes,Labeling Methods,and ImmunoPET Imaging Pharmaceuticals of Iodine-124

Target-specific biomolecules, monoclonal antibodies (mAb), proteins, and protein fragments are known to have high specificity and affinity for receptors associated with tumors and other pathological conditions. However, the large biomolecules have relatively intermediate to long circulation half-lives (>day) and tumor localization times. Combining superior target specificity of mAbs and high sensitivity and resolution of the PET (Positron Emission Tomography) imaging technique has created a paradigm-shifting imaging modality, ImmunoPET. In addition to metallic PET radionuclides, ¹²⁴I is an attractive radionuclide for radiolabeling of mAbs as potential immunoPET imaging pharmaceuticals due to its physical properties (decay characteristics and half-life), easy and routine production by cyclotrons, and well-established methodologies for radioiodination. The objective of this report is to provide a comprehensive review of the physical properties of iodine and iodine radionuclides, production processes of ¹²⁴I, various ¹²⁴I-labeling methodologies for large biomolecules, mAbs, and the development of ¹²⁴I-labeled immunoPET imaging pharmaceuticals for various cancer targets in preclinical and clinical environments. A summary of several production processes, including ¹²³Te(d,n)¹²⁴I, ¹²⁴Te(d,2n)¹²⁴I, ¹²¹Sb(α,n)¹²⁴I, ¹²³Sb(α,3n)¹²⁴I, ¹²³Sb(³He,2n)¹²⁴I, ^natSb(α, xn)¹²⁴I, ^natSb(³He,n)¹²⁴I reactions, a detailed overview of the ¹²⁴Te(p,n)¹²⁴I reaction (including target selection, preparation, processing, and recovery of ¹²⁴I), and a fully automated process that can be scaled up for GMP (Good Manufacturing Practices) production of large quantities of ¹²⁴I is provided. Direct, using inorganic and organic oxidizing agents and enzyme catalysis, and indirect, using prosthetic groups, ¹²⁴I-labeling techniques have been discussed. Significant research has been conducted, in more than the last two decades, in the development of ¹²⁴I-labeled immunoPET imaging pharmaceuticals for target-specific cancer detection. Details of preclinical and clinical evaluations of the potential ¹²⁴I-labeled immunoPET imaging pharmaceuticals are described here.