非PLL相位平均型参考线原型验证

射频相位参考线是粒子加速器的重要组成部分之一,为射频低电平控制系统(LLRF)、束流诊断系统、定时系统等提供稳定的相位锁定参考信号。为减少远距离传输过程中由环境温度变化导致的射频传输线中的射频相位漂移,多个加速器装置中已经采用射频相位参考线提供射频相位参考,这些相位参考的实现方案主要是基于恒温控制和基于光纤锁相。与这些方案相比,采用相位平均方法不仅可以保持长距离节点之间的相位稳定,而且更易于现场安装与维护。现有的带有锁相环(PLL)的终端短路方式实现相位平均参考线的方案仍有一些节点数量限制等方面的不足,本文对相位平均参考线结构进行了去除PLL的简化设计并进行了验证,以期增加更多的相位分配节点以及降低对射频器件参数的要求。对非PLL的单端输入终端短路相位平均方案与两端输入各节点间互为参考的相位平均方案分别进行了实验测试,结果表明两者的相位RMS精度可以达到0.1°~0.3°。并对不同的相位平均实现方案中相位不稳定的产生原因进行了分析,结果表明,除环境温度外,同轴线缆材质、合成相位与幅度的不平衡合成等也是重要影响因素。     

星载海洋激光雷达最佳工作波长分析

星载激光雷达是实现海洋垂直剖面探测的有效工具,也是目前迫切需求的海洋光学遥感手段。对星载海洋激光雷达的波长参数进行评估对保证探测有效性具有重要意义。本文从探测深度和信噪比两方面分析了星载海洋激光雷达探测全球海洋的最佳波长。利用MODIS 10个波段的水体光学特性数据,估算全球海水探测深度及相应的最优波长;并根据太阳夫琅禾费暗线特性,对信号信噪比进行优化。结果表明:在探测深度方面,最优探测波长在488 nm波段的海洋占全球海洋面积的70%左右,并且全球95%以上的海域在488 nm波段的探测深度优于0.8倍的真光层深度;在信噪比方面,相对于488 nm波段,486.134 nm夫琅禾费暗线处采用0.1 nm带宽的滤光片可以将背景光强度降低70%,相应地回波信噪比整体提升了约5.0%。就全球海洋探测来说,使用486.134 nm作为探测波长可以提高探测深度,有效抑制太阳背景光,提高信噪比,因此,486.134 nm是星载海洋激光雷达的最佳工作波长。     

Controlled formation of novel supramolecular microbelts or microprisms from aniline and H2PdCl4 driven by coordination and π–π interactions

In this communication, I report the formation of novel supramolecular one-dimensional (1D) structures including microbelts and microprisms by a direct mix of aniline and H₂PdCl₄ aqueous solutions at room temperature. As-formed supramolecular structures were characterised by scanning electron microscopy, X-ray photoelectron spectra and X-ray diffraction techniques. Both coordination and π–π interactions are expected to be responsible for these 1D microstructures. It suggests that the molar ratio of the reactants is crucial to the formation of such 1D structures.     

Ultrathin Alternating Copolymer Nanotubes with Readily Tunable Surface Functionalities

Well‐defined ultrathin nanotubes (30 nm in diameter and of micrometer‐scale length) were generated through the self‐assembly of a novel alternative copolymer synthesized using an epoxy–thiol click‐chemistry reaction. The self‐assembly mechanism was investigated both by experiments and using dissipative particle dynamics (DPD) simulations. The obtained nanotubes can be readily functionalized with carboxy groups, amino groups, peptides, or other groups by simple modular click copolymerization.     

3D HYBRID DEPTH MIGRATION AND FOUR-WAY SPLITTING SCHEMES

The alternately directional implicit （ADI） scheme is usually used in 3D depth migration. It splits the 3D square-root operator along crossline and inline directions alternately. In this paper, based on the ideal of data line, the four-way splitting schemes and their splitting errors for the finite-difference （FD） method and the hybrid method are investigated. The wavefield extrapolation of four-way splitting scheme is accomplished on a data line and is stable unconditionally. Numerical analysis of splitting errors show that the two-way FD migration have visible numerical anisotropic errors, and that four-way FD migration has much less splitting errors than two-way FD migration has. For the hybrid method, the differences of numerical anisotropic errors between two-way scheme and four-way scheme are small in the case of lower lateral velocity variations. The schemes presented in this paper can be used in 3D post-stack or prestack depth migration. Two numerical calculations of 3D depth migration are completed. One is the four-way FD and hybrid 3D post-stack depth migration for an impulse response, which shows that the anisotropic errors can be eliminated effectively in the cases of constant and variable velocity variations. The other is the 3D shot-profile prestack depth migration for SEG/EAEG benchmark model with two-way hybrid splitting scheme, which presents good imaging results. The Message Passing Interface （MPI） programme based on shot number is adopted.     

光突发交换网络中最长队列优先调度组装机制

提出了光突发交换网络中的最长队列优先调度（LQF-SA）机制,将边缘节点的突发组装和突发调度两种技术紧密结合在一起.在现实网络中,业务通常是非均匀分布的,即在某些源宿对之间存在更大的业务流量.仿真结果表明,LQF-SA机制可以很好地完成非均匀分布业务流的组装.即使在均匀分布业务流输入下,LQF-SA机制在突发大小分布、组装效率和突发丢失率等方面也优于已提出的轮询调度组装（RR-SA）机制.     

C-Fe chains due to segregated carbon impurities on Fe(1 0 0)

Bulk carbon impurities segregate at the Fe(1 0 0) surface and, upon thermal annealing, can form metastable surface phases with local and long range order and peculiar electronic properties. We present a surface science study of C-segregated Fe(1 0 0) with scanning tunneling microscopy, angle resolved photoemission, and ab initio calculations of the surface structure and electron states. In particular the c(3√2 × √2) structure, observed for 0.67 atomic layers of C segregated at the iron surface, is found to be due to self-organized carbon stripes made of zig-zag chains. The strong hybridization between C and Fe was observed in ARPES spectra.     

新型宽谱电磁脉冲试验系统

 研制了一套新型宽谱电磁脉冲试验系统,该系统采用全电感隔离型重复频率Marx发生器产生高压冲击脉冲,经双极脉冲形成线馈入宽带天线进行宽谱辐射。介绍了发生器工作原理和双极脉冲形成原理。实验结果表明：发生器输出脉冲电压500 kV,脉冲前沿20 ns,重复频率20 Hz,宽谱辐射因子195 kV,辐射中心频率200 MHz,频谱宽度37%。该试验系统结构紧凑、操作灵活,并具有方位辐射方向360°旋转和运程控制等功能。     

A transmission line model for subwavelength metallic grating with single cut

A transmission line model for subwavelength metallic grating with single cut is presented. The model is based on analogy between the subwavelength metallic structure and the microwave transmission line theory. The analytical expression for the transmission is derived by the transfer matrix method. To confirm our model, the finite-difference time-domain (FDTD) method simulations are carried out. The influences of the position of the cuts on the higher modes of slit are presented. It is found that the transmission line model gives analytical prediction about the evolution of the transmission spectra.     

细线径螺旋线长脉冲产生技术

提出了双路输出的螺旋脉冲形成线(PFL)结构,该结构内置用于充电的高耦合变压器,在螺旋PFL的两端各自输出一个脉冲,副路匹配输出时主路输出脉冲波形具有良好的平顶品质,主路输出脉冲能量占储能的大部分,解决了Korovin提出的螺旋PFL充电问题。对比分析双路输出的螺旋 PFL与SINUS-700/130两种技术路线,结果发现双路输出的螺旋 PFL改善了输出脉冲的平顶质量,输出功率提高29%,但是副路输出占用11%的储能,不易充分利用。