乙醇/水混合溶剂体系中碳酸钙晶体晶型和取向的控制

采用（NH₄）₂CO₃分解法,制备得到了晶型和形貌可控的CaCO₃晶体。研究结果表明,乙醇/水混合溶剂、陈化时间和L-半胱氨酸自组装单层模板对CaCO₃晶体的晶型、取向和形貌都具有重要影响。无单层模板情况下,溶液中主要得到了球霰石,球霰石的形貌随陈化时间从花朵外形变为树叶形。同样的醇/水体系中,在自组装单层上却得到了取向为（104）晶面的方解石。这与水溶液中同一自组装单层上主要获得（001）结晶面的方解石有明显不同。方解石的形貌也随陈化时间变化而改变。陈化时间为3h时,得到具有孔洞结构的方解石;陈化时间为12h时,得到表面光滑的菱面体方解石。     

银、镧改性混合型吸热碳氢燃料裂解分子筛催化剂的研究

为提高吸热型碳氢燃料的吸热能效,制备了吸热型碳氢燃料NNJ-150和银、镧 离子交换改性USY,ZSM-5分子筛及混合分子筛,考察了NNJ-150在USHY,HZSM-5和 二者混合物以及银、镧改性混合分子筛催化剂上的裂解情况。结果表明,NNJ-150 在Ag-LaUSY + Ag-LaZSM-5（75：25）混合分子筛上裂解时,低碳烯烃选择性较高 （600 ℃,47.92%）,催化剂寿命较长(35 min以上）,催化性能比较稳定,可满 足冷却高超音速飞行器的要求。     

STUDY ON THE SEQUENCE STRUCTURE OF SBR BY 13C—NMR METHOD Ⅰ. ASSIGNMENT FOR UNSATURAT CARBONS SPECTRA*

The sequence structures of emulsion-processed SBR and solution-processed (by lithium catalyst) SBR were investigated by ~(13)C-NMR spectroscopy. Seventeen peaks within unsaturated carbon region were recorded under the adopted experimental conditions. Assignments for these peaks were made by empirical-parameter-evaluation method.     

Evidence of lanthanum–chromium mixed oxides formed in CrOx/La2O3 model catalysts

CrO_x/La₂O₃ mixed oxides, prepared by impregnating La₂O₃ with appropriate aqueous solutions of (NH₄)₂CrO₄ and calcining at 600 °C for 4 h, have been investigated by means of XRD, TPR, XPS, DRIFTS, and Raman spectroscopy (RS). The formation of the compounds La₂CrO₆, La(OH)CrO₄ and LaCrO₄ under these conditions was evidenced. Strong peaks at 864, 884, 913, and 921 cm⁻¹, as well as weak peaks at 136, 180, 354, 370, and 388 cm⁻¹ in the RS spectrum of CrO_x/La₂O₃ have been assigned to La₂CrO₆.     

KINETIC ANALYSIS OF CO-CONDENSATION POLYMERIZATION OF AB2 AND AB MONOMERS

This work deals with the kinetics of co-condensation polymerization of AB2 and AB monomers, giving expressions of the two-dimensional molecular weight distribution function and the number/weight average molecular weights of the resulting copolymers. The two-dimensional molecular weight distribution depends on two indices, n and l, which are the respective numbers of AB2 and AB units in a copolymer species. The evolution of the two-dimensional weight and z distributions during the co-condensation polymerization has been evaluated systematically. Finally, the two-dimensional distribution was transformed into a one-dimensional molecular weight distribution with only one variable (the molecular weight of the products instead of the degree of polymerization). The calculated results show that the highly branched copolymer has a very broad molecular weight distribution when the co-condensation polymerization approaches completion.     

线型高聚物分子量分布函数的另一种推导方法

针对自由基聚合歧化终止和偶合终止两类机理生成的线型高聚物,应用统计物理的基本原理,对其分子量分布重新进行了理论推导,其方法简洁清晰,无须任何附加假定,导出FlorySchulz分布.结果有助于从另一方面理解FlorySchulz分布的物理学基础.     

NARROW-DISPERSED CROSSLINKED CORE-SHELL POLYMER MICROSPHERES PREPARED BY SURFACE-INITIATED ATOM TRANSFER RADICAL POLYMERIZATION＊

Grafting of polystyrene with narrowly dispersed polymer microspheres through surface-initiated atom transfer radical polymerization (ATRP) was investigated. Polydivinylbenzene (PDVB) microspheres were prepared by dispersion polymerization with poly(N-vinyl pyrrolidone) (PVP) as stabilizer. The surfaces of PDVB microspheres were chloromethylated by chloromethyl methyl ether in the presence of zinc chloride as catalyst to form chloromethylbenzene initiating core sites for subsequent ATRP grafting of styrene using CuCl/bpy as catalytic system. Polystyrene was found to be grafted not only from the particle surfaces but also from within a thin shell layer, resulting in the formation of particles size increased from 2.38-2.58μm, which can further grow to 2.93μm during secondary grafting polymerization of styrene. This demonstrates that grafting polymerization proceeds through a typical ATRP procedure with living nature. All of the prepared microspheres have narrow particle size distribution with coefficient of variation around 10%.     

Properties of TiO2-SiO2 Mixed Oxides and Photocatalytic Oxidation of Heptane and Sulfur Dioxide

A series of TiO2-XSiO2[X denotes the molar fraction(%) of silica in the mixed oxides] with different n(Ti)/n(Si) ratios was prepared with ammonia water as a hydrolysis catalyst. The photocatalysts prepared were characterized by XRD, thermal analysis, FTIR, UV-Vis and SPS. The characterization results of FTIR and UV-Vis spectra show that Ti atoms were gradually changed from octahedral coordination to tetrahedral coordination with the addition of silica, which is not beneficial for obtaining strong Bronsted acidity and higher photocatalytic activity. The photocatalytic activity experiments, which were conducted by using heptane (or SO2) as the model reactant, showed that TiO2-SiO2 containing a suitable amount of silica can exhibit much higher photocataiytic activity than pure TiO2. The enhanced photocatalytic activity can be attributed tothree following factors.. (1) smaller crystalline size;(2) higher thermal stability; (3) the new strong Broensted acidity.     

Preparation and characterization of nanosize nickel-substituted cobalt ferrites (Co1−xNixFe2O4)

Nanosize nickel-substituted cobalt ferrites were prepared using aerosol route and characterized by TEM, XRD, magnetic and Mössbauer spectroscopy. The particle size of as obtained samples was found to be ∼10 nm which increases upto ∼80 nm on annealing at 1200 °C. The unit cell parameter ‘a’ decreases linearly with the nickel concentration due to smaller ionic radius of nickel. The saturation magnetization for all the samples after annealing at 1200 °C lies in the range 47.6-84.5 emu/g. Room temperature Mössbauer spectra of as obtained samples exhibit a broad doublet, suggesting super paramagnetic nature of the sample. The broad doublet is further resolved into two doublets corresponding to the iron atoms residing at the surface and internal regions of the particle. The samples annealed at 1200 °C showed broad sextet, which is resolved into two sextets, corresponding to tetrahedrally and octahedrally coordinated Fe cations. Cation distribution calculated using XRD and Mössbauer data indicates a decrease in Fe³⁺(oct.)/Fe³⁺(tet.) ratio with increasing nickel concentration.     

Ti-Si复氧化物载体对金催化剂上丙烯环氧化的影响

 以TiCl4和SiCl4为原料,采用水解和非水水解溶胶-凝胶两种方法制备了一系列不同Ti含量的Ti-Si复氧化物载体,继而用沉积-沉淀法制得载金催化剂. 采用X射线衍射、紫外-可见漫反射光谱、 N2吸附和高分辨透射电镜对催化剂进行了表征,并考察了催化剂在氢气和氧气存在下的丙烯气相环氧化催化性能. 研究表明,钛含量在6%～14%范围内时,两种方法制得的Ti-Si复氧化物均为无定形结构,但采用非水水解溶胶-凝胶法制得的载体比表面积较高. 以非水水解溶胶-凝胶法制备的钛含量10%的Ti-Si复氧化物为载体得到的载金催化剂表现出较高的活性和选择性,反应60 min时,丙烯转化率为5.7%, 240 min后降为3.3%, 环氧丙烷的选择性稳定于95%左右. 还考察了非水水解溶胶-凝胶的陈化时间和金沉积-沉淀溶液的pH值等对反应结果的影响.