Local and non-local sources of airborne particulate pollution at Beijing--The ratio of Mg/Al as an element tracer for estimating the contributions of mineral aerosols from outside Beijing

A new element tracer technique has firstly been established to estimate the contributions of mineral aerosols from both inside and outside Beijing. The ratio of Mg/Al in aerosol is a feasible element tracer to distinguish between the sources of inside and outside Beijing. Mineral aerosol, inorganic pollution aerosol mainly as sulfate and nitrate, and organic aerosol are the major components of airborne particulates in Beijing, of which mineral aerosol accounted for 32%―67% of total suspended particles (TSP), 10%―70% of fine particles (PM2.5), and as high as 74% and 90% of TSP and PM2.5, respectively, in dust storm. The sources from outside Beijing contributed 62% (38%―86%) of the total mineral aerosols in TSP, 69% (52%―90%) in PM10, and 76% (59%―93%) in PM2.5 in spring, and 69% (52%―83%), 79% (52%―93%), and 45% (7%―79%) in TSP, PM10, and PM2.5, respectively, in winter, while only ～20% in summer and autumn. The sources from outside Beijing contributed as high as 97% during dust storm and were the dominant source of airborne particulates in Beijing. The contributions from outside Beijing in spring and winter are higher than those in summer, indicating clearly that it was related to the various meteorological factors.     

Dependence of Thermal Stability of an Engine Lubricating Oil on Usage Period

Mineral oil type lubricating oils have an important role in reducing engine wear. But after some period, depending on the oil quality, oil replacement is needed since the oil loses its properties. In this paper, an engine oil was tested in a 1300 cc engine car and the change of the thermal stability of the collected portions of oil at different usage periods were experimented by TG/DTG and DSC techniques. Results show that, as usage period increases lubricating oil contains more of the light components that distill at low temperatures. The increase in the peak maximum temperature, T_max, of the DTG, as usage period increases, proposes that the molecular mass of the oil increase, which presumably changes the viscosity characteristics. Moreover as the usage period increases some residue type components, which only can be destroyed at very high temperatures, are produced in oil phase. This revised version was published online in August 2006 with corrections to the Cover Date.     

Micro-CT参数对骨质疏松性椎体压缩性骨折术后复发的预测价值

本研究探讨Micro-CT参数对骨质疏松性椎体压缩性骨折(OVCF)患者术后复发的预测价值。选取OVCF患者127例,根据术后6个月骨折复发情况分为复发组(n=41)与未复发组(n=86)。患者均接受Micro-CT检查,对比两组Micro-CT参数,即骨体积分数(BV/TV)、骨小梁厚度(Tb.Th)、骨小梁间隙(Tb.Sp)、结构模型指数(SMI),以及骨密度(BMD)、骨矿含量(BMC),分析各参数与BMD、BMC及术后复发相关性,并评价各参数对术后复发的预测价值。结果显示,复发组骨体积分数(BV/TV)、骨小梁厚度(Tb.Th)低于未复发组,骨小梁间隙(Tb.Sp)、结构模型指数(SMI)高于未复发组(P<0.05);BV/TV、Tb.Th与骨密度(BMD)、骨矿含量(BMC)呈正相关,Tb.Sp、SMI与BMD、BMC呈负相关(P<0.05);将年龄、BMD、BMC等其他因素控制后,BV/TV、Tb.Sp、Tb.Th、SMI与OVCF术后骨折复发显著相关(P<0.05);BV/TV、Tb.Sp、Tb.Th、SMI联合预测OVCF术后骨折复发的曲线下面积(AUC)最大,为0.888(P<0.05)。提示Micro-CT参数在OVCF患者中呈异常表达,采用Micro-CT检查可为临床预测OVCF术后骨折复发提供科学指导。     

基于元素指纹的白术产地溯源及其与土壤的相关性研究

本研究主要采用电感耦合等离子体质谱仪(ICP-MS)等手段测定5个产地白术41种矿质元素含量和土壤41种化学成分指标, 结合聚类分析法、偏最小二乘判别分析(PLS-DA)法和Pearson相关性分析研究了不同产区白术矿质元素特征以及不同产区土壤因子的差异, 并对它们的相关性进行了探讨. 结果表明, 采用无监督的聚类分析和有监督的PLS-DA均能正确判别不同产地的白术和土壤, 其中稀土元素在浙江白术与土壤间呈正相关. 另外, Li、V、Mn、Co、Cu、Rb、Cd、Cs、Ba等微量元素是白术产地溯源的关键因素. 研究发现在白术生产实践中可以通过适量控制种植地的土壤湿度、增施特定肥料等措施调控白术矿质元素含量. 本研究将为解释道地白术的品质形成机制, 保证白术药效质量的有效性提供一定帮助.     

新工科背景下大型仪器培训体系的创新与实践——以扫描电镜为例

针对传统大型仪器培训体系存在的定位不准、内容不足、方案陈旧等局限性,结合“新工科”人才培养理念,围绕开放共享、科研导向、育人为本、安全高效的大型仪器培训方针,充分挖掘大型仪器设备的资源价值,释放科技资源潜力,初步建立了以扫描电镜为主体的远程培训、实体培训、应用培训、动态监管“四位一体”的新型大型仪器培训体系,形成了一个闭环的、高效的大型仪器培训管理模式,具有一定的推广和借鉴价值。     

糠醛氧化合成糠酸

糠酸作为糠醛的重要下游产品,在食品制造、材料制备、光学技术、药物合成中具有重要的应用,可用于合成防腐剂、增塑剂、热固性树脂、香料以及多种药物。目前,关于糠醛的制备以及催化氢化制备下游产物的综述报道相对较多,但是还没有系统地整理评述糠醛氧化合成糠酸的相关工作。本文综述了近年来以糠醛为主要原料制备糠酸的研究进展情况,讨论了不同催化体系及在不同氧源存在下对糠酸选择性的影响,重点突出了非均相催化剂在糠酸的工业化制备中的应用前景,对糠酸制备的未来发展方向进行了展望。     

Reactive blends derived from modified soybean oil and silicone

Reactive blends prepared from methoxysilane terminated silicone polymers and silylated soybean oil are described and characterized. Although simple mixing of soy and silicones results in gross phase separation, homogeneous polymeric products are obtained by introducing reactive sites. These products can be used as protective coatings, additives to adhesives and new sealants. Exposure of the mixtures to moisture leads to hydrolysis of the methoxysilanes and subsequent condensation of the resulting silanols that yields stable siloxane linkages between the two immiscible phases. FTIR, TGA, and swell‐gel analyses indicate effective formation of these siloxane crosslinks. Reactive blends containing less than 20% silylated oil appeared completely transparent but increasing the soy content decreased the optical transparency. SEM micrographs reveal the silicone polymer as the continuous phase with individual spherical silylated soy oil particles distributed in it. The properties of these reactive blends vary from high elongation elastomers to high modulus resins depending on the composition. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3086–3093     

Synthesis of poly(ω‐pentadecalactone)‐b‐poly(acrylate) diblock copolymers via a combination of enzymatic ring‐opening and RAFT polymerization techniques

Herein the first reported preparation of diblock copolymers of the polyethylene‐like polyester poly(ω‐pentadecalactone) (PPDL) via a combination of enzymatic ring‐opening polymerization (eROP) and reversible addition‐fragmentation chain‐transfer (RAFT) polymerization techniques is described. PPDL was synthesized via eROP using Novozyme 435 as a catalyst and a bifunctional initiator/chain transfer agent (CTA) appropriate for the eROP of ω‐pentadecalactone (PDL) and RAFT polymerization of acrylic and styrenic monomers. Chain growth of the PPDL macro‐CTA was performed to prepare acrylic and styrenic diblock copolymers of PPDL, and demonstrates a facile, metal‐free, and “greener” alternative to preparing acrylic diblock copolymers of polyethylene (PE). Diblock copolymer architecture was substantiated via analysis of ¹H NMR spectroscopic, UV‐GPC chromatographic, DSC onset crystallization (T_c), and MALDI‐ToF mass spectrometric data. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3326–3335     

A highly rigid diamine monomer derived from naturally occurring myo‐inositol and its use for polyamide synthesis

A rigid diamine was synthesized from myo‐inositol, a naturally occurring cyclic hexaol, and used as a monomer to synthesize polyamides. myo‐Inositol was treated with 1,1‐dimethoxycyclohexane to yield a bisketal bearing two hydroxyl groups, and from this bisketal, the target diamine was synthesized in three steps: (1) derivation of the diol into the corresponding bistriflate, (2) nucleophilic substitution of the bistriflate with sodium azide yielding a diazide, and (3) reduction of the diazide to the target diamine. The target diamine readily underwent polycondensation with dicarboxylic acid chloride in solution. The resulting polyamides, whose main chain inherited the rigid 5‐6‐5 system from the diamine monomers, have high glass transition temperatures. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3436–3443