Cystamine-incorporated gelatin microsphere and its redox-responsive release property

Reduction-responsive cystamine-incorporated gelatin microspheres were prepared by an emulsification method. On SEM micrograph, the microsphere, prepared at pH 9.0 and at the carboxyl/amino group molar ratio of 1:1, was sphere-like and its diameter was a few to 100 µm. The gelatin to cystamine ratio of the microsphere was about 1:0.2 (w/w), determined by energy dispersive X-ray spectroscopy. Two endothermic peaks were observed around 92°C and 126°C, which were thought to be the melting point of gelatin-rich phase and that of cystamine-rich phase, respectively. The microsphere released its payload (FITC-dextran) in dithiothreitol (a reducing agent) concentration-dependent manner.     

Polyurea microcapsules from isocyanatoethyl methacrylate copolymers

The synthesis of two types of isocyanate side chain containing copolymers, poly(methyl methacrylate‐co‐isocyanatoethyl methacrylate) (P(MMA‐co‐IEM)) and poly(benzyl methacrylate‐co‐isocyanatoethyl methacrylate) (P(BnMA‐co‐IEM)), which were synthesized by Cu(0)‐mediated radical polymerization, is reported. Polymerization proceeded to high conversion giving polymers of relatively narrow molar mass distributions. The incorporation of the bulky aromatic groups in the latter copolymer rendered it sufficiently stable toward hydrolysis and enabled the isolation of the product and its characterization by ¹H and ¹³C NMR, and FTIR spectroscopy and SEC. Both P(MMA‐co‐IEM) and P(BnMA‐co‐IEM) were functionalized with dibutylamine, octylamine, and (R)‐(+)‐α‐methylbenzyl‐amine, which further proved the successful incorporation of the isocyanate groups. Furthermore, P(BnMA‐co‐IEM) was used for the fabrication of liquid core microcapsules via oil‐in‐water interfacial polymerization with diethylenetriamine as crosslinker. The particles obtained were in the size range of 10–90 µm in diameter independent of the composition of copolymer. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2698–2705     

Hollow glass microspheres coated with CoFe2O4 and its microwave absorption property

Spinel CoFe₂O₄ coating on the surface of hollow glass microspheres of low density was synthesized by co-precipitation method. The phase structures, morphologies, particle size, shell thickness, chemical compositions of the composites have been characterized by X-ray diffraction (XRD), field emission scanning electron microscope (FESEM) and energy dispersive X-ray spectroscopy (EDS). The results show that CoFe₂O₄ coating on hollow glass microspheres can be achieved, and the coating layers are constituted by CoFe₂O₄ nanoparticles of mean size ca. 10 nm. The as-synthesized powder materials were uniformly dispersed into the phenolic cement, then the mixture was pasted on metal plate with the area of 200 mm×200 mm as the test plate. The test of microwave absorption was carried out by the radar-absorbing materials (RAM) reflectivity far field radar cross-section (RCS) method. The results indicate that the coated CoFe₂O₄/hollow glass microspheres composites can be applied in lightweight and strong absorption microwave absorbers.     

ICF靶用空心玻璃微球耐压性能测试

 利用自行研制的空心微球耐外压装置和充气装置，测试了目前激光惯性约束聚变实验打靶使用的空心玻璃微球耐内压能力和耐外压能力。空心玻璃微球采用液滴法制备，直径为180～250 mm、壁厚为0.8~4.0 mm。理论计算表明，当微球纵横比超过90时，耐外压能力与球壳材料的杨氏模量有关，由此测量得到的空心玻璃微球杨氏模量为55~75 GPa。玻璃微球的耐内压能力主要与球壳材料的抗拉强度有关，实验测量得到的玻璃微球抗拉强度为90~140 MPa。     

用多孔玻璃膜管悬浮聚合法制备单分散性聚苯乙烯微球

Monodisperse polystyrene microspheres are prepared by shell porous glass(SPG)-suspension polymerization. The influences of SPG on size and size dispersity of the microspheres are investigated. The properties of the microspheres are studied by GPC, TEM and SEM. The results indicate that the polystyrene microspheres possess definite monodispersibity and their particle size is in the range of 5～12μm.     

Synthesis and properties of porous polyvinylamine microspheres from acrylonitrile

A novel route to synthesize crosslinked porous polyvinylamine (PVAm) microspheres from acrylonitrile (AN) was developed. In the first step, crosslinked porous polyacrylonitrile (PAN) spheres were prepared by copolymerization of AN and divinylbenzene (DVB). Then they were hydrolyzed to form polyacrylamide (PAM) spheres. And lastly, the porous PVAm spheres were successfully obtained via Hofmann degradation of PAM spheres. Scanning electron microscope (SEM) indicated that these PVAm microspheres have rough surfaces and porous interior structure. The pore size, the amino content, and the content of equilibrium water were also investigated. The pore size of these PVAm microspheres increased with the hydrolytic process. The contents of equilibrium water was changed from 49.6 to 96.5% depending on the different crosslinking degrees, and the amino contents were varied between 9.60 and 15.30 mmol/g depending on the different molar ratio of n(NaClO)/n(NaOH). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1674–1682, 2008     

Dissolution of sintered thorium dioxide in phosphoric acid using autoclave and microwave methods with detection by gamma spectrometry

A quantitative and fast method of dissolution of refractory thoria (ThO₂) was developed for the determination of thorium (Th) in a given sample. The dissolution of sintered ThO₂ powder, microspheres and pellets using 88% phosphoric acid was investigated. The conditions of quantitative dissolution of ThO₂ microspheres were optimized by conventional heating in autoclave and also by microwave heating. 100 mg of sintered ThO₂ microspheres were dissolved in 8 g of phosphoric acid in an autoclave, and heating at 170 °C for 3 h, in comparison to 5 g of phosphoric acid by microwave heating (375 W) at 220 °C for 1 h. Dissolution studies on the powder form of sintered ThO₂ were also performed. 1 g of sintered ThO₂ powder could be dissolved in 6.5 g of phosphoric acid in autoclave heating at 170 °C for 1 h. Strong complexing of (PO₄)³⁻ with Th⁴⁺ may be the influencing factor for quantitative dissolution of ThO₂.     

PS-PBA粒子分散系的介电弛豫谱解析——同、反离子对弛豫的影响及表界面电参数的计算

制备了近纳米级的聚苯乙烯-丙烯酸丁酯(PS-PBA)复合微球粒子,并在40Hz～110×106Hz的宽频范围测量了该粒子分散在9种电解质中时的介电弛豫谱,发现了与PS微球粒子分散系不同的特异介电弛豫:低频弛豫对反离子种类具有敏感性而高频弛豫则与电解质种类几乎无关;根据Shilov-Dukhin模型和M-W-O模型分别分析了高、低频率的弛豫机制,并通过对介电谱的Cole-Cole拟合获得了各体系的介电参数.进一步利用Hanai方法由介电参数计算获得了所有体系的相参数;详细分析了体系的内部参数受PS-PBA微球自身结构以及电解质种类影响的原因;讨论了离子扩散系数对介电参数的影响,从而得出了低、高频的弛豫特征时间分别由同离子的扩散系数和反离子的扩散系数所决定之结论.最后,结合Grosse宽频介电理论计算了粒子表面的以及双电层的主要电参数,并分析了电解质种类差异对这些电参数的影响.     

苯乙烯-甲基丙烯酸羟基乙酯共聚物微球固载金属卟啉催化剂的制备及其催化性能

 将酰氯化的羧基金属卟啉 (MP) 与表面含羟基的苯乙烯-甲基丙烯酸羟基乙酯共聚物微球 (P(St-co-HEMA)) 进行酯化反应, 制备了共聚物微球固载的金属卟啉催化剂 (P(St-co-HEMA)MP). 采用扫描电镜、紫外-可见光谱、红外光谱和热重等手段对微球进行了表征, 并考察了它在“金属卟啉?抗坏血酸?分子氧”体系中催化环己烷羟化反应性能. 结果表明, 共聚物微球固载的金属卟啉比非固载的金属卟啉具有更高的催化活性, 催化剂重复使用 4 次, 仍保持较高催化活性. 各共聚物微球固载的金属卟啉催化活性顺序为 P(St-co-HEMA)FeP > P(St-co-HEMA)MnP > P(St-co-HEMA)CoP.     

Preparation of magnetic polylactic acid microspheres and investigation of its releasing property for loading curcumin

In order to obtain a targeting drug carrier system, magnetic polylactic acid (PLA) microspheres loading curcumin were synthesized by the classical oil-in-water emulsion solvent-evaporation method. In the Fourier transform infrared spectra of microspheres, the present functional groups of PLA were all kept invariably. The morphology and size distribution of magnetic microspheres were observed with scanning electron microscopy and dynamic light scattering, respectively. The results showed that the microspheres were regularly spherical and the surface was smooth with a diameter of 0.55-0.75 μm. Magnetic Fe₃O₄ was loaded in PLA microspheres and the content of magnetic particles was 12 wt% through thermogravimetric analysis. The magnetic property of prepared microspheres was measured by vibrating sample magnetometer. The results showed that the magnetic microspheres exhibited typical superparamagnetic behavior and the saturated magnetization was 14.38 emu/g. Through analysis of differential scanning calorimetry, the curcumin was in an amorphous state in the magnetic microspheres. The drug loading, encapsulation efficiency and releasing properties of curcumin in vitro were also investigated by ultraviolet-visible spectrum analysis. The results showed that the drug loading and encapsulation efficiency were 8.0% and 24.2%, respectively. And curcumin was obviously slowly released because the cumulative release percentage of magnetic microspheres in the phosphate buffer (pH=7.4) solution was only 49.01% in 72 h, and the basic release of curcumin finished in 120 h.