离子液体辅助CaMoO4中空微米球的制备及光学性质研究

以1-正丁基-3-甲基咪唑溴盐离子液体([BMIM]Br)/水体系为反应介质，利用简便的液相沉淀法在室温下合成了钼酸钙(CaMoO₄)中空微球体材料。分别利用X-射线粉末衍射(XRD)、场发射扫描电子显微镜(SEM)以及透射电子显微镜(TEM)对产品的相结构及形貌进行表征，发现产品为空心结构的白钨矿型微米级球体,并且该CaMoO₄微球体是由粒径为10～20 nm的纳米粒子聚集而成。利用紫外可见(UV-Vis)漫反射谱及室温光致发光(PL)谱测试了产品的光学性质。通过与纯水相、1-乙基-3-甲基咪唑溴盐离子液体([EMIM]Br)/水及1-正己基-3-甲基咪唑溴盐离子液体([HMIM]Br)/水等体系中所得产品的对比，证明了[BMIM]Br对产品的形貌及光学性能等具有重要影响，并对中空微球体形成的机理进行了讨论。     

Fabrication of macroporous polystyrene/graphene oxide composite monolith and its adsorption property for tetracycline

Macroporous polystyrene microsphere/graphene oxide(PS/GO) composite monolith was first prepared using Pickering emulsion droplets as the soft template. The Pickering emulsion was stabilized by PS/GO composite particles in-situ formed in an acidic water phase. With the evaporation of water and the oil phase(octane), the Pickering emulsion droplets agglomerated and combined with each other, forming a three-dimensional macroporous PS/GO composite matrix with excellent mechanical strength. The size of the macrospores ranged from 4 mm to 20 mm. The macroporous PS/GO composite monolith exhibited high adsorption capacity for tetracycline(TC) in an aqueous solution at p H 4–6. The maximum adsorption capacity reached 197.9 mg g 1at p H 6. The adsorption behaviour of TC fitted well with the Langmuir model and pseudo-second-order kinetic model. This work offers a simple and efficient approach to fabricate macroporous GO-based monolith with high strength and adsorption ability for organic pollutants.     

分散聚合制备羧基化单分散聚苯乙烯交联微球

以苯乙烯(St)、丙烯酸(AA)为单体,二乙烯基苯(DVB)为交联剂,偶氮二异丁腈(AIBN)为引发剂,采用分散聚合和交联剂后滴加法合成了单分散羧基化交联聚苯乙烯微球。通过傅立叶红外光谱(FT-TR),扫描电子显微镜(SEM),激光粒度及Zeta电位分析仪等对微球结构进行了表征。结果表明,引发剂、分散剂用量和交联剂的加入方式对微球粒径及单分散性影响显著,当St用量为15%(wt)、DVB用量为1%(wt)、AA用量为1%(wt)、AIBN用量为2%(wt)、PVP用量为6%(wt)时所制备的微球具有良好的单分散性和球形形貌,粒径达到4μm,且微球表面带负电荷。     

氨基化修饰介孔Fe3O4@SiO2@mSiO2磁性核壳复合微球的可控制备及吸附性能

以水热法制备的高磁饱和强度Fe_3O_4纳米颗粒为核,正硅酸乙酯(TEOS)为前驱体,采用改进的St觟ber法,制备介孔SiO_2包覆Fe_3O_4磁性核壳复合微球。利用XRD、SEM、TEM、N2吸附-脱附、FTIR和VSM对制备样品的物相结构、形貌和磁性能进行了测试表征。研究结果表明,制备的复合材料呈球形,粒径分布均一,材料的比表面积和磁饱和强度分别为413 m2·g-1和68.93emu·g-1。研究了TEOS的添加量对复合微球形貌的影响,随着TEOS添加量的增加,SiO_2壳层增厚,复合粒子形貌均匀,饱和磁化强度有所下降,仍具有良好的超顺磁性。在此基础上,通过接枝法在复合微球的表面接枝-NH2,制备了一种新型磁性纳米吸附剂(Fe_3O_4@SiO_2@m SiO_2-NH2),进而研究了其对水中重金属离子Cr(Ⅵ)的吸附性能。通过动力学拟合,Fe_3O_4@SiO_2@m SiO_2-NH2对Cr(Ⅵ)的吸附过程是准二级动力学模型占主导地位,探究了该材料对Cr(Ⅵ)的吸附过程和吸附机理。结果表明,其吸附机理及吸附容量与Cr(Ⅵ)的离子形态及-NH2有关,并通过吸附剂与吸附质之间的电子共用或静电吸附实现。     

酵母菌模板法制备CeO2空心微球及其光催化性能

以酵母菌为生物模板辅助沉淀法制备了Ce O2空心微球。采用傅里叶转换红外光谱(FT-IR)、X射线衍射(XRD)、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)和氮气吸附-脱附等对样品进行了表征,结果表明,在600℃煅烧后得到了Ce O2空心微球,其形态与酵母菌一致为椭球体,球壳是由大小约为25 nm的Ce O2纳米颗粒组成,比表面积为22 m2·g-1,远大于未用模板制备的Ce O2微粒的比表面积。通过紫外-可见漫反射测定,得到Ce O2空心微球的禁带宽度为3.03 e V,相比于相同条件下合成的无模板Ce O2禁带宽度(3.42 e V)明显减小。室温下用模拟太阳光照射降解酸性橙7(AO 7)对样品的光催化性能进行了测试,结果表明,在照射120 min之后降解率能达到96%以上,降解效果明显高于未使用模板的Ce O2微粒。对Ce O2空心微球的形成机理进行了分析。     

Synthesis and characterization of heat-stabilized albumin magnetic microspheres

Human serum albumin magnetic microspheres containing 30% iron oxide particles were synthesized by a heat-stabilization process. The average diameter, the size distribution and the morphology were characterized by scanning electron microscopy, atomic force microscopy and transmission electron microscopy. The distribution of the iron oxide nanoparticles within the microspheres was confirmed by the contrast obtained in the morphology by backscattered electron imaging in scanning electron microscopy. Energy-dispersive X-ray spectroscopy showed the presence of iron in the microspheres. The cabbage like surface structure in some of the microspheres obtained in scanning electron microscopy can be better understood by atomic force microscopy. This peculiar surface structure in the microsphere may be due to the cross-linking in the protein molecule by heat. The amount of iron oxide in the microsphere was analyzed by atomic absorption spectroscopy. The magnetic properties of the particles were measured in a superconducting quantum interference device magnetometer. Received: 12 September 2000 Accepted: 5 February 2001     

Au Nanoparticles Loaded on Hollow TiO2 Microspheres with (001) Exposed Facets: a Strategy for Promoting Photocatalytic Performance

Au nanoparticles loaded TiO₂ hollow microspheres with exposed (001) facets(Au-HTFs) were synthesized through template-free hydrothermal process combined with a chemical reduction role. Au-HTFs displayed excellent photocatalytic activity in catalyzing oxidization reaction in organic pollutant system, which originates from the synergistic effect of the reactive (001) facets and Au nanoparticles with a wide range of absorption in visible region based on localized surface plasmon resonance effect. The unique synergistic effect could largely increase the photocatalytic performance resulting from the improvements of both the visible light aborption and the recombination of electron-hole pairs. Our findings revealed that among Au-HTFs with different Au loading percentages, Au-HTFs with 2%(mass fraction) Au loading possessed the superior photocatalytic activity.     

硬质聚氨酯微球的合成研究

报道了以二苯基甲烷二异氰酸酯（MDI）、聚醚多元醇及三乙醇胺为原料合成硬质聚氨酯微球的方法。扫描电镜结果显示其微球的粒径在10μm-14μm。讨论了预聚温度、三乙醇胺用量及搅拌速率等条件对微球形态和粒径的影响。     

沉淀聚合制备荧光聚脲微球及Fe3+检测

以异氟尔酮二异氰酸酯为单体, 以氨基功能化的1.8-萘二甲酰亚胺(AABD)为荧光基团, 在水/丙酮质量比为3/7的混合溶剂中, 通过沉淀聚合制备了表面洁净的高度单分散荧光聚脲微球(FPU). 通过FTIR及¹H NMR对AABD及FPU的化学结构进行了表征; 通过UV-Vis光谱确定FPU中嵌入的AABD荧光单元的含量; 通过荧光光谱研究了FPU固体粉末分散在水中及溶解在N-甲基吡咯烷酮中的荧光特性以及FPU分散在不同Fe³⁺浓度水溶液中的荧光变化. 结果表明, FPU的平均粒径(D_n)为5.24 μm, 粒径分布(D_w/D_n)为1.004, 具有强烈的绿色荧光(激发波长为420 nm, 最大发射波长为522 nm); FPU分散在水中不发生荧光自猝灭, 其荧光强度随着Fe³⁺浓度的增加(10^-4 ~10^-3 mol/L)呈线性降低.     

分散聚合法制备单分散聚苯乙烯微球

以苯乙烯为单体,偶氮二异丁腈为引发剂,聚乙烯吡咯烷酮为分散稳定剂,在乙醇/水的极性反应体系中,使用分散聚合法制备了聚苯乙烯(PS)微球。研究了制备工艺对微球分子量等远程结构参数的影响。研究结果表明:在适合微球形成的单体用量、引发剂和分散稳定剂的浓度、反应温度、时间和乙醇/水的比例等参数下,克服了以往存在的粒径不均匀、分子量较低、微球表面圆整光洁度较低和产率偏低等主要问题,制备了粒径在1.5~3μm之间、粒径分布1.05~1.08、分子量80×104左右、最高得率达97%、球体表面光洁、球形对称均匀且相互不粘连的单分散PS微球。