Thermodynamic and shape memory properties of TPI/HDPE hybrid shape memory polymer

The traditional processing technology of shape memory polymer composites is complex and the cost of high performance filler is high. Therefore, low-cost high density polyethylene (HDPE) was introduced into trans-1,4-polyisoprene (TPI) matrix as reinforcing phase, and a novel shape memory polymer was prepared by mechanical melt blending, which fully exerted the excellent properties of plastic and rubber. Because of the difference in molecular chain distribution between different blend ratios of TPI/HDPE hybrid SMPCs specimens, the change of the blend ratio of the two components affects the thermodynamic and shape memory properties of the SMPCs. A series experimental results show that the TPI/HDPE hybrid SMPCs with the blend ratio of 80/20 has excellent thermodynamic and shape memory properties. And we believe that the relevant conclusions of this study can provide valuable design reference for the development of high-performance TPI SMPCs.     

Preparation of body-temperature-triggered shape-memory polyurethane with biocompatibility using isosorbide and castor oil

Shape memory polyurethanes (SMPUs) have attracted much attention in the biomedical field because they can easily control the transition temperature (T_trans) to shape memory and are biocompatible. In this study, a shape memory polyurethane with both biocompatibility and a T_trans close to the body temperature was synthesized by using natural derivatives of isosorbide and castor oil in place of petroleum-based materials. Isosorbide and castor oil were used to form net points, and polycaprolactone diol (PCL diol) acted as the switching segment. The synthesized four polyurethane (PCL diol/isosorbide/castor oil, PICU-1, 2, 3, 4) with different isosorbide contents exhibited desired thermal and mechanical properties. In the thermo-cyclic shape memory testing experiment, the PICU series demonstrated good shape memory property, with more than 95% shape recovery ratio (R_r) and more than 90% shape fixity ratio (R_f), and PICU-3 recovered its shape within 20 s in a 37 °C water bath. In addition, the PICU series proved to be safe materials with excellent biocompatibility, as indicated by the observed C2C12 cells viability and proliferation. The stent made with the PICU-3 film showed near complete magnetization at 37 °C within 18 s and proved to be a suitable self-expanding stent.     

不同色浆质量分数的水性聚氨酯涂料对聚氯乙烯表皮低温爆破性能的影响

本文制备了一系列不同色浆质量分数的水性聚氨酯涂料,并将其喷涂在汽车仪表板聚氯乙烯(PVC)表皮的背面形成复合材料。 用旋转流变仪表征了涂料的粘度以评价其喷涂性能;用差示扫描量热仪表征了材料的玻璃化转变温度(T_g);利用万能材料试验机表征了材料在-30 ℃条件下的拉伸性能及抗撕裂性能;用动态热机械分析仪表征了材料的损耗比随温度的变化。 结果表明:不同色浆质量分数的涂料都能喷涂,含有涂层材料PVC表皮在-30 ℃低温爆破性能与涂层材料的T_g、低温拉伸性能、抗撕裂性能的关系并不大,而与涂层材料的阻尼性能直接相关。 材料的阻尼性能越好,其低温爆破性能越好。     

Effect of methoxy position on dynamic mechanical and shape memory properties of methoxyphenol-based polybenzoxazines

Abstract

Two series of benzoxazines were synthesized from o-, m-, and p-methoxyphenols, two polyetheramines with different molecular weights, and formaldehyde. The glass transition temperatures (T _gs) of m-methoxyphenol-based polybenzoxazines are respectively higher than those of o- and p-methoxyphenol-based counterparts. The polybenzoxazines exhibit thermally induced one-way dual-shape memory behavior based on T _g, and the o- and p-methoxyphenol-based polybenzoxazines exhibit higher shape memory performance than m-methoxyphenol-based counterparts under motion constraints.     

Electrospun hyperbranched polylactic acid–modified cellulose nanocrystals/polylactic acid for shape memory membranes with high mechanical properties

The polylactic acid (PLA) nanofiber membranes reinforced with hyperbranched PLA‐modified cellulose nanocrystals (H‐PLA‐CNCs) were prepared by electrospinning. The H‐PLA‐CNCs and the nanofiber membranes were researched by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), thermal gravimetric analysis (TGA), differential scanning calorimetry (DSC), and dynamic mechanical analysis (DMA). The outcomes embodied that the cellulose nanocrystals (CNCs) could be successfully improved by the hyperbranched PLA, which would offer powerful CNCs/matrix interfacial adhesion. Thus, the mechanical and shape memory properties of PLA can be improved by adding the H‐PLA‐CNCs. In particular, when the addition of H‐PLA‐CNCs was 7 wt%, the tensile strength and an ultimate strain of PLA composite nanofiber membranes was 15.56 MPa and 25%, which was 228% and 72.4% higher than that of neat PLA, respectively. In addition, the shape recovery rate of the PLA/5 wt% H‐PLA‐CNCs composite nanofiber membrane was 93%, which was 37% higher than that of neat PLA. We expected that this present study would provide unremitting efforts for the development of more effective approaches to prepare biology basic shape memory membranes with high mechanical properties.     

Effects of Grape Polyphenols on the Life Span and Neuroinflammatory Alterations Related to Neurodegenerative Parkinson Disease-Like Disturbances in Mice

Functional nutrition is a valuable supplementation to dietary therapy. Functional foods are enriched with biologically active substances. Plant polyphenols attract particular attention due to multiple beneficial properties attributed to their high antioxidant and other biological activities. We assessed the effect of grape polyphenols on the life span of C57BL/6 mice and on behavioral and neuroinflammatory alterations in a transgenic mouse model of Parkinson disease (PD) with overexpression of the A53T-mutant human α-synuclein. C57BL/6 mice were given a dietary supplement containing grape polyphenol concentrate (GPC—1.5 mL/kg/day) with drinking water from the age of 6–8 weeks for life. Transgenic PD mice received GPC beginning at the age of 10 weeks for four months. GPC significantly influenced the cumulative proportion of surviving and substantially augmented the average life span in mice. In the transgenic PD model, the grape polyphenol (GP) diet enhanced memory reconsolidation and diminished memory extinction in a passive avoidance test. Behavioral effects of GP treatment were accompanied by a decrease in α-synuclein accumulation in the frontal cortex and a reduction in the expression of neuroinflammatory markers (IBA1 and CD54) in the frontal cortex and hippocampus. Thus, a GP-rich diet is recommended as promising functional nutrition for aging people and patients with neurodegenerative disorders.     

阻尼对空爆荷载等效静载动力系数的影响

为考查阻尼参数对空爆荷载等效静载动力系数的影响,理论推导了空爆荷载下结构等效单自由体系弹塑性位移解及延性比解,设计并计算了阻尼比0.000 1～0.1、延性比1～4的20种典型工况的动力系数,并与现行抗爆设计规范动力系数公式结果进行了对比。结果表明:阻尼比小于0.000 1时可基本代表无阻尼状态,阻尼比0.01的动力系数比无阻尼的最大降低幅度为2.08%,数值差异很小,因此阻尼比为0.01以内时,可忽略阻尼对动力系数的影响;阻尼比0.05的动力系数比无阻尼的降低幅度约9.92%,数值差异较大,认为阻尼比0.05以上时将具有明显的经济效益;现行设计规范动力系数更适用于柔性结构体系,运用于刚性结构抗爆设计时,计算误差较大,对阻尼比较小的结构设计更不利。     

一类具有连续变量的二阶非线性阻尼差分方程的振动准则

考虑了一类具有连续变量的二阶非线性阻尼差分方程,利用积分变换和广义R iccati变换,给出了此类方程的振动准则.     

形状记忆合金椭圆孔口问题的有限单元法

基于Lagoudas形状记忆合金(SMA)三维本构模型,假设材料为各向同性,推导了SMA平面应力状态的增量型本构方程,继而编写了ABAQUS用户自定义材料(UMAT)子程序,研究了在双向拉伸情况下,外载荷、温度、椭圆孔口长短轴之比对超弹性SMA椭圆孔口板中应力诱发马氏体相变区的影响。数值结果表明:应力诱发马氏体相变首先发生在椭圆孔口长轴端点部位,在外加载荷作用下逐渐扩展到板内,并由内向外形成马氏体相区、相变混合区和奥氏体相区;SMA板内应力诱发马氏体完全相变区面积与施加外载荷成正相关,与温度成负相关;随着椭圆孔口长短轴之比增大,SMA板内应力诱发马氏体完全相变区面积呈现出先减小后增大的趋势;拉应力差值相同时,相较于拉应力沿椭圆孔口长轴方向较大的情况,当拉应力沿椭圆孔口短轴方向较大时,SMA板内完全相变区面积较大,椭圆孔口周边应力集中现象更明显。