氢稀释对纳米晶硅薄膜晶化特性的影响及薄膜生长机理

以SiH4与H2作为前驱气体,采用射频等离子增强化学气相沉积技术制备了纳米晶硅薄膜.利用Raman散射和红外吸收光谱等技术,对不同氢稀释比条件下薄膜的微观结构和键合特性进行了研究.结果表明,随着氢稀释比增加,薄膜的晶化率明显提高,而氢稀释比过高时,薄膜晶化率呈现减少趋势.红外吸收光谱分析表明,纳米晶硅薄膜中氢的键合模式与薄膜的晶化特性密切相关.随着氢稀释比增加,薄膜中整体氢含量和SiH2键合密度明显减少,而在高氢稀释比条件下,氢稀释比增加导致薄膜中SiH2键合密度和整体氢含量增加.     

光学薄膜鲁棒设计中膜系误差灵敏度控制

提出了一种基于膜系误差灵敏度控制的鲁棒膜系设计方法,建立了鲁棒膜系设计评价函数在膜层参数误差统计分布下的解析表达式,避免统计样本数目有限性造成的样本均值与总体期望的误差,以及过大数目样本造成的长的计算时间消耗,并通过宽带增透膜、中性分光膜和线性透射率滤光片等多种薄膜的鲁棒设计实验证实了其在膜层参数误差控制上的效果。结果表明：该新型鲁棒膜系设计方法具有内在的快速算法特性,其设计膜系对镀膜中的膜厚监控误差不敏感,对于高质量薄膜的重复制备和批量成品率的提高具有实用价值。     

便携式土壤重金属探测仪光学结构设计

当前土壤中的重金属污染日益严重,研究开发便携式土壤重金属快速、现场检测技术设备能为土壤重金属污染状况普查提供快速、有效的技术手段。系统中发射光路采用透镜对激光光束会聚并作用到样品;收集光路采用抛物面镜组对等离子体光信号收集并耦合至光纤。分析了激光光束经透镜汇聚后作用到样品时的功率密度,给出了等离子体光信号耦合至光纤端面的光斑大小,并得到整个光学系统的大小尺寸。结果表明,整个光学系统结构紧凑、体积小、光信号耦合效率高,非常适用于便携式土壤重金属快速、现场的探测系统应用。     

多级离心泵内叶轮出口压力脉动研究

为研究瞬态工况下离心泵叶轮出口处的压力脉动情况,为离心泵泄漏流道流动提供边界条件,建立了包含叶轮和导叶流道的离心泵模型,基于CFD方法计算得到了其在不同工况下的性能参数,利用测试数据对结果进行了验证。分析了瞬态工况下叶轮出口处压力的变化趋势,比较了不同工况对叶轮出口压力脉动的影响,发现叶轮出口压力随叶轮旋转呈周期性变化,压力脉动频率与转速及叶轮数量有关;偏工况时叶轮出口压力脉动趋势与额定工况基本一致,但脉动频率及脉动幅值有较大区别;随离心泵转速增加,叶轮出口处压力脉动的最大值和最小值均呈减小趋势,但幅值随转速增加而增加,且增幅明显。     

车载空调器设计平台研究与开发

针对车载空调器设计手工计算繁琐、设计周期长等诸多不便利特点,研制开发了基于VB和SOLIDEDGE软件的车载空调器设计平台。该平台不仅具有车载空调器整机开发、机组设备单独设计或选型以及换热器参数化设计的功能,还兼容了家用空调器设计开发的能力。平台运行平稳,结果直观可靠。     

菲索式合成孔径望远镜光学系统设计

设计了菲索式合成孔径望远镜光学系统,用3个小口径子孔径合成大口径以获得等效大口径的分辨率。首先,兼顾空间频率u-v覆盖和结构简单化,选择子孔径排列方式为Golay-3阵列,填充因子F=0.44。然后,依据光学系统结构特性,将光学系统分成子孔径、光束控制器和光束组合器,分别进行光学设计。无焦式子孔径采用后接双胶合消色差透镜的卡塞格林结构,孔径为300 mm,视场为0.2°,角放大率为10。光束组合器为五片式结构,采用高折射率玻璃和特殊部分色散玻璃,焦距为600 mm,F/#=6,视场为2°。分析总系统点扩散函数和调制传递函数显示：总系统等效口径为子孔径口径的1.89倍,总系统角分辨率为0.24″。     

卫星激光通信滤光膜的研制

为满足卫星激光通信中超高速数据传输的特殊要求,采用电子束和离子辅助沉积技术,制备了532nm、632nm和1 064nm波长处高反射,808nm和1 550nm处高透射的多波段滤光膜.选取了H4和SiO2作为高低折射率材料,通过对膜系设计曲线的不断优化,减少了灵敏层的个数,得到了相对易于制备的膜系结构;采用电子束加热蒸发方法并加以离子辅助沉积系统制备薄膜,采用光控与晶控同时监控的方法控制膜厚;通过不断调整工艺,提高了薄膜的抗激光损伤能力,减小了膜厚控制误差,提高了透射波段的透过率及反射波段的反射率,最终得到了光谱性能较好的滤光膜.该薄膜能够承受雨淋、盐雾、高低温等环境测试,满足使用要求.     

中波红外成像无热化光学系统设计

介绍了温度变化对红外光学系统的影响和红外光学系统无热化设计的常用方法。应用CODE-V光学设计软件设计了一个工作于中红外光谱波段的折射式全球面镜无热化光学系统,采用锗、硅和硒化锌3种光学材料,系统镜间材料为铝合金。设计结果表明:在-40℃～+65℃温度范围内,光学系统的成像质量接近衍射极限,且光学系统的出瞳与光栏重合,具有结构简单、体积小、质量轻、成本低等优点,可应用于空间红外光学系统。     

QbD approached comparison of reaction mechanism in microwave synthesized gold nanoparticles and their superior catalytic role against hazardous nirto‐dye

Microwave irradiation (MI) process characteristically enables extremely rapid “in‐core” heating of dipoles and ions, in comparison to conventional thermal (conductance) process of heat transfer. During the process of nanoparticles synthesis, MI both modulates functionality behaviors as well as dynamic of reaction in favorable direction. So, MI providing a facile, favorable and alternative approach during nanoparticles synthesis nanoparticles with enhanced catalytic performances. Although, conventionally used reducing and capping reagents of synthetic origin, are usually environmentally hazardous and toxic for living organism. But, in absence of suitable capping agent; stability, shelf life and catalytic activity of metallic nanoparticles adversely affected. However, polymeric templates which emerged as suitable choice of agent for both reducing and capping purposes; bearing additional advantages in terms of catalyst free one step green synthesis process with high degree of biosafety and efficiency. Another aspect of current works was to understand role of process variables in growth mechanism and catalytic performances of microwave processed metallic nanoparticles, as well as comparison of these parameters with conventional heating method. However, due to poor prediction ability with previously published architect OFAT (One factor at a time) design with these nanoparticles as well as random selection of process variables with their different levels, such comparison couldn't be possible. Hence, using gum Ghatti (Anogeissus latifolia) as a model bio‐template and under simulated reaction conditions; architect of QbD design systems were integrated in microwave processed nanoparticles to establish mechanistic role these variables. Furthermore, in comparison to conventional heating; we reported well validated mathematical modeling of process variables on characteristic of nanoparticles as well as synthesized gold nanoparticles of desired and identical dimensions, in both thermal and microwave‐based processes. Interestingly, despite of identical dimension, MI processed gold nanoparticles bearing higher efficiency (kinetic rate) against remediation of hazardous nitro dye (4‐nitrophenol), into safer amino (4‐aminophenol) analogues.     

Mechanism of nickel extraction from sulfuric acid medium by synthesized α‐aminophosphonate derivative

A new compound, α‐aminophosphonate derivative containing pyridine ring (PPDE), was designed and synthesized as an extractant for the separation of nickel from metal impurities. Over 94.5% of Ni (II) extraction from sulfuric acid solution was achieved by using PPDE with an equilibrium pH of 4.02. Meanwhile, high separation coefficients of 23.8 for Ni to Co, 84.9 for Ni to Mn, 254.1 for Ni to Ca and 696.7 for Ni to Mg, respectively, were obtained. It was noted that PPDE exhibited an excellent regenerability, and the extraction of Ni with the recycled organic phase ranged from 92.5% to 93.9% during six circulations. The extracted nickel complex was determined as [Ni (PPDE)₂(DNNSA^?)₂(H₂O)₄], which was supported by the data obtained from Fourier transform‐infrared, UV–Vis and electrospray ionization‐mass spectrometry spectra.