一种正交二视角光学层析重建算法

提出了一种基于最大熵原理的正交二视角重建算法,该算法能够较好地重建多峰非对称待测场,且只需两个正交方向的投影数据。算法中融合了含有轴对称因子的先验知识,该先验知识可由两个正交方向的投影数据迭代算出,并分析了正交投影方向这个因素对重建结果的影响。通过计算机数值模拟,结果表明,融合先验知识的正交二视角重建算法与没有融合先验知识的正交二视角重建算法相比重建精度全面超出。其中,在两峰随机余弦高斯模拟待测场的情况下均方根误差减少了73％。在三峰随机高斯模拟待测场的情况下均方根误差减少了47％。该算法充分显示了在重建多峰非对称待测场时的优越性。同时,由于只需要两个正交方向的投影数据,可使实验系统得到简化。     

理想气体任意过程最高和最低温度的计算方法

给出理想气体任意过程最高和最低温度的三种计算方法，用p-V图中的直线过程、圆过程、椭圆过程为例，计算该过程最高、最低温度的状态。     

多控制者下的双向量子隐形传态

提出了一种多控制者的双向量子隐形传态方案。在该理论方案中有三个控制者协助通信,纠缠资源为最大七粒子纠缠态,其中通信者Alice和Bob以及三个控制者预先秘密共享最大七粒子纠缠态以构建量子信道。三个控制者的参与提高了通信的安全性,同时也避免了执行三粒子联合测量的复杂性。在通信过程中,首先Bob对自己密享的粒子执行酉操作,接着通信方各自对自己手中的粒子执行Bell基测量。假如控制者同意双方通信,便对自己手中的粒子执行单粒子测量并将测量结果通过经典信道传输给通信者。通信方分别结合控制者所公布的测量结果做相应的酉操作,这样便能完美地实现双向量子控制隐形传态。     

Al_2O_3薄层修饰SiN_x绝缘层的IGZO-TFTs器件的性能研究

采用原子层沉积工艺(ALD)生长均匀致密的三氧化二铝(Al2O3)薄层对氮化硅(Si Nx)绝缘层进行修饰,研究了铟镓锌氧薄膜晶体管(IGZO-TFTs)器件的性能。当Al2O3修饰层厚度为4 nm时,绝缘层-有源层界面的最大缺陷态密度相比于未修饰器件降低了17.2%,器件性能得到显著改善。场效应迁移率由1.19 cm2/(V·s)提高到7.11 cm2/(V·s),阈值电压由39.70 V降低到25.37 V,1 h正向偏压应力下的阈值电压漂移量由2.19 V减小到1.41 V。     

WMS的玻璃药瓶内氧气含量检测及其标定方法改进

应用激光波长调制光谱(WMS)技术,建立了一种开放光路短光程检测玻璃药瓶内氧气含量的方法。选择氧气分子位于760.885(13 142.58 cm-1)的吸收谱线,通过多次调试优化了系统相关参数,给出了实时扣背景及实时谱线校正等数据处理的方法和步骤。采集七种不同氧气含量的玻璃药瓶样本,获取相应的二次谐波信号,分别建立二次谐波峰值、半高谱峰面积与浓度的线性回归方程进行定量预测。实验结果表明,其拟合系数分别为0.996 6和0.997 8,后者相比前者的标定方法提高了0.12%。采用完全交互验证的方法来评价两个模型的预测精度,其预测的均方根误差(RMSEP)分别是0.003 1和0.002 0,后者相比前者降低了37.69%。对浓度是4%的气体样品,比较不同时间的20次测量结果,标准差分别为0.002 2和0.001 6,后者相比前者降低了27.3%,同时其测量灵敏度分别为0.198%和0.097%,后者相比前者的灵敏度提高了约51%。证明了该系统及数据处理方法对玻璃药瓶内氧气含量检测是可行的,且利用半高谱峰面积更丰富的幅值信息来反演气体浓度可以降低波峰失真影响,检测精度更高,稳定性更好。     

符号圈拼接图的零度

令$\eta(\Gamma)$和$c(\Gamma)$是符号图$\Gamma$的零度和基本圈数. 一个符号圈拼接图是指每个块都是圈的连通符号图. 本文证明了对任意符号拼接图$\eta(\Gamma)\le c(\Gamma)+1$成立, 并且刻画了等号成立的极图, 推广了王登银等人(2022)在简单圈拼接图上的结果. 此外, 我们证明了任意的符号拼接图$\eta(\Gamma)\neq c(\Gamma)$, 给出了满足$\eta(\Gamma)=c(\Gamma)-1$的符号拼接图的一些性质并刻画处$\eta(\Gamma)=c(\Gamma)-1$的二部符号拼接图.     

Universal Expression of Efficiency at Maximum Power: A Quantum-Mechanical Brayton Engine Working with a Single Particle Confined in a Power-Law Trap

We propose a quantum-mechanical Brayton engine model that works between two superposed states, employing a single particle confined in an arbitrary power-law trap as the working substance. Applying the superposition principle, we obtain the explicit expressions of the power and efficiency, and find that the efficiency at maximum power is bounded from above by the function:η+ =θ/(θ+ 1), with being a potential-dependent exponent.     

Maximum confidence measurements via probabilistic quantum cloning

Probabilistic quantum cloning(PQC) cannot copy a set of linearly dependent quantum states.In this paper,we show that if incorrect copies are allowed to be produced,linearly dependent quantum states may also be cloned by the PQC.By exploiting this kind of PQC to clone a special set of three linearly dependent quantum states,we derive the upper bound of the maximum confidence measure of a set.An explicit transformation of the maximum confidence measure is presented.     

On the role of pressure in elasto-inertial turbulence

The dynamics of elasto-inertial turbulence is investigated numerically from the perspective of the coupling between polymer dynamics and flow structures. In particular, direct numerical simulations of channel flow with Reynolds numbers ranging from 1000 to 6000 are used to study the formation and dynamics of elastic instabilities and their effects on the flow. Based on the splitting of the pressure into inertial and polymeric contributions, it is shown that the polymeric pressure is a non-negligible component of the total pressure fluctuations, although the rapid inertial part dominates. Unlike Newtonian flows, the slow inertial part is almost negligible in elasto-inertial turbulence. Statistics on the different terms of the Reynolds stress transport equation also illustrate the energy transfers between polymers and turbulence and the redistributive role of pressure. Finally, the trains of cylindrical structures around sheets of high polymer extension that are characteristics of elasto-inertial turbulence are shown to be correlated with the polymeric pressure fluctuations.     

RFQ结构参数σ/R 对电极最大表面电场及极间电场的影响

基于CST 微波工程软件对四杆型RFQ 的模拟运算,分析了在不同情况下不同的RFQ 结构参数σ/R与电极最大表面电场Emax 之间的关系,发现对应于不同RFQ 孔径下的最小的Emax,其结构参数σ/R 的值是不同的。同时发现改变σ/R,RFQ极间电场线性度始终保持在99.5% 以上,但σ/R 变大会微幅提升极间电场线性度。Based on the simulation on 4-rods RFQ by the CST MWS software, we analyzed the relationship between the RFQ’s structure parameter σ/R and the maximum electrode field Emax, and found that as the aperture R varies,the value of σ/R corresponding to the minimum Emax does not necessarily keep constant. We also found that the RFQ interelectrode field linearity maintains over 99.5% as σ/R veries, although it slightly increases as σ/R increases.