高温下镜面纯Fe的表面质量研究

研究了真空状态下保温60 min不同退火温度对镜面纯铁的表面粗糙度、表面形貌及晶粒取向的影响。结果表明：在纯铁的多晶型性转变温度点以下,面均方根粗糙度随退火温度的升高而缓慢增大;在多晶型性转变温度及以上发生突变,从面均方根粗糙度为4~5 nm的镜面突变到700 nm;用扫描电子显微镜(SEM)观察样品表面,发现在810 ℃出现再结晶细小晶粒。研究了原材料及860~960 ℃之间几个温度点的X射线衍射{200}晶面极图,结果发现：晶粒在860 ℃开始择优取向,随温度升高,取向越来越明显;再结晶对表面粗糙度的影响不大,晶粒的择优取向使得晶粒在不同方向的膨胀系数不同,以及多晶型性转变导致体积的变化使得晶粒之间挤压造成晶粒之间的凹凸不平和表面较深较粗的晶界,这是造成粗糙度突变的主要原因。     

PAMS微球制备过程中电解质的影响

为调控固化过程中双重乳液内径的变化和降低聚--甲基苯乙烯(PAMS)微球的表面粗糙度,研究了双重乳液固化过程中内外水相中电解质浓度对水在油相液膜中迁移和分相行为的影响。结果表明：仅在外水相中添加电解质时,内水相的渗透压高于外水相,使得内相水向外水相迁移,导致固化后的微球表面起皱。当在内外水相同时添加电解质时,由于平衡了三相之间水的化学势,抑制了水在油相液膜中的迁移和分相,导致PAMS微球壳壁内气泡体积和数量显著降低。同时,在内外水相中同时添加不同浓度的电解质,还可显著改善双重乳液三相之间的密度匹配度,从而提高微球的球形度和壁厚均匀性。     

折叠波导行波管切断匹配的设计

利用电磁模拟软件,计算得到了H面渐变与E面渐变的楔形衰减器匹配效果,指出在相同渐变长度下,E面渐变匹配效果优于H面渐变。H面渐变衰减器反射主要来源于电场集中处,而E面渐变衰减器主要来源于渐变前部尖端处。在此基础上设计出了一种变形的匹配衰减器,即在E面渐变衰减器渐变开始处向前延伸一块薄片。计算结果与测试结果表明:与H面渐变和E面渐变的楔形衰减器相比,所设计衰减器在近截止频率处的匹配效果得到了明显的改善。     

新颖的PPLN电光开关

在分析基于级联二阶非线性效应的准相位匹配周期极化铌酸锂(PPLN)波导全光波长变换器的有关参量容限的基础上,提出PPLN波长变换器的电光调控设想,并给予简要论证,论证结果是可行的,从而可实施电控调谐来自动补偿其失配,进而也可实现光开关的功能 关键词： 准相位匹配 周期极化铌酸锂 波长变换 光开关 电光效应调控     

绿光抽运准周期光学超晶格产生红光与蓝光的研究

使用一块准周期LiTaO3光学超晶格晶体,利用准相位匹配技术,通过光参变产生与和频两个非线性过程,将一束532nm绿色抽运光转变成666nm红光与443nm蓝光。具体过程为,通过参变过程获得红色信号光和红外闲频光,再通过绿色抽运光与红外闲置光和频获得蓝光,两个过程在同一块准周期光学超晶格中实现,准周期超晶格的两个倒易矢量分别补偿这两个过程中的相位失配。抽运光的脉宽为40ps,重复频率为10Hz,在平均功率为0．5mW时,测得红光和蓝光功率分别0．15mW和16．6μW,转换效率达到34％和3％。这一方法,提供了一种用一块超晶格晶体同时获得三原色输出的有效途径。     

Evidence for ion–ion interactions between peptides and anions (HSO4− or ClO4−) derived from high‐acidity acids

The existence of gas‐phase electrostatic ion–ion interactions between protonated sites on peptides ([Glu] Fibrinopeptide B, Angiotensin I and [Asn¹, Val⁵]‐Angiotensin II) and attaching anions (ClO₄^? and HSO₄^?) derived from strong inorganic acids has been confirmed by CID MS/MS. Evidence for ion–ion interactions comes especially from the product ions formed during the first dissociation step, where, in addition to the expected loss of the anion or neutral acid, other product ions are also observed that require covalent bond cleavage (i.e. H₂O loss when several carboxylate groups are present, or NH₃ loss when only one carboxylate group is present). For [[Glu] Fibrinopeptide B + HSO₄]^?, under CID, H₂O water loss was found to require less energy than H₂SO₄ departure. This indicates that the interaction between HSO₄^? and the peptide is stronger than the covalent bond holding the hydroxyl group, and must be an ion–ion interaction. The strength and stability of this type of ion‐pairing interaction are highly dependent on the accessibility of additional mobile charges to the site. Positive mobile charges such as protons from the peptide can be transferred to the attaching anion to possibly form a neutral that may depart from the complex. Alternatively, an ion–ion interaction can be disrupted by a competing proximal additional negatively charged site of the peptide that can potentially form a salt bridge with the positively charged site and thereby facilitate the attaching anion's departure. Copyright © 2014 John Wiley & Sons, Ltd.     

字符串匹配算法在DNA序列比对中的应用

高通量测序技术的飞速发展让生物信息领域迎来了大数据时代。新技术在提供海量生物遗传信息的同时,也给分析这些数据带来了新的挑战。DNA序列比对是信息分析流程中的关键步骤,为后续的变异检测提供序列比对信息。2015“深圳杯”数学建模夏令营B题以DNA序列比对为研究课题,希望参赛学生给出序列快速比对的最佳方案。本文简要点评了各参赛队伍的解答情况,然后介绍了现有DNA序列比对软件中用到的算法和数据结构。     

Effects of substrate and transfer on CVD-grown graphene over sapphire-induced Cu films

We differentiated the effects of Cu films deposited on single crystalline a-,r-,and c-plane sapphire substrates upon graphene films synthesized with atmospheric pressure chemical vapor deposition(CVD).The data illustrate that the realization of high-crystalline Cu film is dependent not only on the crystallinity of underlying substrate,but also on the symmetric match of crystallographic geometry between metal film and substrate.We also systematically investigated the effects of PMMA removal on the Raman ID/IG and IG/I2D values of transferred graphene.The results reveal that different PMMA removal methods do not alter the ID/IG values;instead,the residue of PMMA increases the IG/I2D values and the thermal decomposition of PMMA leads to higher IG/I2D values than the removal of PMMA with acetone.The effects of PMMA removal on variations of the Raman spectra are also discussed.     

一种多尺度边缘测度融合加权HD算法

一般的边缘加权Hausdorff算法,由于单尺度边缘检测算子本身对噪音敏感,会造成真实和虚假边缘显著性差异小,从而加权后对噪音鲁棒性改善有限.为此,提出了一种基于多尺度边缘测度融合加权的Hausdorff景象匹配算法.对图像提取多尺度边缘测度后,引入证据推理理论,提出一种双向指数基本置信指派构造方法,并构造出多尺度边缘测度的基本置信指派函数,然后采用冲突再分配DSmT组合规则进行融合.为了进一步区别真实边缘与高频噪音,对加权Hausdorff公式进行了一些改进,给出了更为有效利用融和后边缘测度的加权Hausdorff公式.对可见光和SAR景象的匹配实验证明:本文算法所提取边缘在抑制噪音的同时保留了大量景象细节信息,并通过横向对比验证本文算法提高了噪音鲁棒性.     

A Low-Noise 230 GHz SIS Receiver for Radio Astronomy Employing Untuned Nb/AlOx/Nb Tunnel Junctions

A heterodyne receiver based on a 1/3 reduced height rectangular waveguide SIS mixer with two mechanical tuners has been built for astronomical observations of molecular transitions in the 230 GHz frequency band. The mixer used an untuned array (R_nC_j3, R_n70 ) of four Nb/AIOx/Nb tunnel junctions in series as a nonlinear mixing element. A reasonable balance between the input and output coupling efficiencies has been obtained by choosing the junction number N=4. The receiver exhibits DSB (Double Side Band) noise temperature around 50 K over a frequency range of more than 10 GHz centered at 230 GHz. The lowest system noise temperature of 38 K has been recorded at 232.5 GHz. Mainly by adjusting the subwaveguide backshort, the SSB (Single Side Band) operation with image rejection of 15 dB is obtained with the noise temperature as low as 50 K. In addition, the noise contribution from each receiver component has been studied further. The minimum SIS mixer noise temperature is estimated as 15 K, pretty close to the quantum limit v/k11 K at 230 GHz. It is believed that the receiver noise temperatures presented are the lowest yet reported for a 230 GHz receiver using untuned junctions.