X-ray, Raman and FTIRS studies of the microstructural evolution of zirconia particles caused by the thermal treatment

Genesis of the structure of zirconia particles prepared by precipitation of amorphous hydrated zirconia by ammonia from the ZrO(NO₃)₂ solution followed by a mild hydrothermal treatment (HTT) of precipitate, washing and calcination under air up to 1000 °C has been studied by X-ray diffraction (XRD), Raman and FTIRS. As revealed by FTIRS of lattice modes, the local structure of amorphous zirconia subjected to HTT is close to that in m-ZrO₂. This helps to obtain nearly single-phase monoclinic nanozirconia (particle size 5-15 nm) already after a mild calcination at 500 °C. Stability of this phase with nanoparticles sizes below the critical value determined by thermodynamic constraints is due to its excessive hydroxylation demonstrated by FTIRS. Dehydroxilation and sintering of these nanoparticles at higher (600-650 °C) temperatures of calcination leads to reappearance of the (111) “cubic” reflection in XRD patterns. Modeling of XRD patterns revealed that this phenomenon could be explained by polysynthetic (001) twinning earlier observed by HRTEM.     

Effects of glucose,glutamine, and malate on the metabolism of spodoptera frugiperda clone 9 (sf9) cells

Optimal design and operation of bioreactors for insect cell culture is facilitated by functional relations providing quantitative information on cellular metabolite consumption kinetics, as well as on the specific cell growth rates (μ_G). Initial specific consumption rates of glucose, malate, and oxygen, and associated changes in μ_G, were measured forSpodoptera frugiperda clone 9 (Sf9) cells grown in batch suspension culture in medium containing 7–35 mM glucose, 0–16 mM malate, and 4–16 mM glutamine. The initial specific glucose consumption rate (q _G ) could be described by a modified Michaelis-Menten equation treating malate as a “competitive” inhibitorK ₁ = 6.5 mM) and glutamine as a “noncompetitive” inhibitorK _I = 14 mM) ofq _G , with aK _m of 7.1 mM for glucose. All three carbon sources were found to increase μ_G in a saturable manner, and a modified Monod equation was employed to describe this relationship (μ_Gmax = 0.047 h^-1). The initial specific oxygen consumption rate (q_O2) in Sf9 cells could be related to μ_G by the maintenance energy model, and it was calculated that, under typical culture conditions, about 15–20% of the cellular energy demand comes from functions not related to growth. Fitted parameters in mathematical expression for μg: K₄, Monod constant for glucose (mM); K₅, modified Monod constant for malate (mM); K₆, Monod constant for glutamine (mM); m_o2, specific consumption rate of oxygen by the cells under zero-growth conditions (nmol/cell/h); q_F, initial specific fumarate production rate (nmol/cell/ h);q _G , initial specific glucose consumption rate (nmol/cell/h); q_Gmax, maximum initial specific glucose consumption rate (nmol/cell/h);q _M , initial specific malate consumption rate (nmol/cell/h); q_o2, initial specific oxygen consumption rate (nmol/cell/h); Y_o2, cell yield on oxygen (cells/nmol); μ, initial specific cell growth rate (h^-1); μ_g, initial specific cell growth rate (h^-1); μG_max, maximum initial specific cell growth rate (h^-1).     

Synthesis, Characterization, and Physical Properties of Two Trinuclear, Mixed-Valence Species of Type [μ3-OMnIIMnIII 2(O2CCF3)6(R)3] (R=H2O, CH3COOH)

The preparation and characterization of two new mixed-valence, trinuclear species, [Mn₃O(O₂CCF₃)₆(H₂O)₃]CF₃COOH4/3H₂O (1) and [Mn₃O(O₂CCF₃)₆(CH₃COOH)₃] (2), is reported. Compound 1 crystallizes in the triclinic space group, P¯1 (No. 2), with the parameters, a=12.3131(9) Å, b=12.4427(9) Å, c=12.965(1) Å, =72.593(4)°, =73.453(5)°, =68.345(4)°, V=1727.2(2) ų, and Z=2. A total of 14060 reflections were collected in the range 1.6827.52°. The final weighted and non-weighted agreement indices, R1=0.0589 and wR2=0.1445 were based on a total of 6953 unique reflections with an R _int value of 0.0542. Compound 2 crystallizes in the monoclinic space group, P2₁/n (No. 14), with the parameters, a=12.876(3) Å, b=12.212(4) Å, c=17.732(4) Å, =100.40(3)°, V=3640.4(1) ų, and Z=4. A total of 32197 reflections were collected in the range 1.7227.13°. The final weighted and non-weighted agreement factors, R1=0.0647 and wR2=0.1609 were based on a total of 8018 unique reflections with an R _int value of 0.0462. An investigation of the physical properties revealed that both compounds display an intermediate ground state of S=3/2 as a consequence of intramolecular antiferromagnetic coupling. The magnetic data for compound 1 was best fit to the parameters g=2.09, J=–5.5 cm^–1, J=–3.4 cm^–1, and D _Mn(III)=–4.5 cm^–1; the data for compound 2 was best fit to the parameters g=2.10, J=–2.9 cm^–1, J=–5.5 cm^–1, and D _Mn(III)=–4.5 cm^–1.     

Modeling of plasma jets with superimposed vortex flow

This work is concerned with analytical studies of thermal plasma jets, which are finding increasing interest for thermal plasma processing. A two-dimensional model for turbulent plasma jets with superimposed vortex flow has been developed, incorporating multiple time scales for velocity and temperature fluctuations and a density-weighted averaging for the density fluctuation effect. Results show that adding swirl to the flow field for confined and free jets induces strong axial and radial pressure gradients near the nozzle exit, causing a rapid decay of the axial velocity with increasing distance from the nozzle. Comparisons with cold flow show similar trends close to the nozzle exit, but further downstream, the axial velocities increase again, especially for larges swirl numbers. Comparisons of theoretical predictions based on the present model with available experimental data are, in general, in reasonable agreement.     

A study for quality evaluation of Taxilli Herba from different hosts based on fingerprint-activity relationship modeling and multivariate statistical analysis

In this study, a fingerprint-activity relationship modeling between chemical fingerprints and antirheumatic activity was established, and multivariate statistical analysis was used to evaluate the quality of Taxilli Herba (TH) from different hosts. Characteristic fingerprints of 20 batches of TH samples were generated by high-performance liquid chromatography coupled with triple quadrupole-time of flight tandem mass spectrometry (HPLC-Triple TOF-MS/MS), and the similarity analysis was calculated based on thirteen common characteristic peaks by hierarchical clustering analysis (HCA). Subsequently, nine efficacy markers were discovered by combining fingerprints and antirheumatic activity through grey correlation analysis (GCA) and bivariate correlation analysis (BCA). Meanwhile, the content of 5 constituents in 9 markers was determined by high-performance liquid chromatography coupled with triple quadrupole-linear ion trap tandem mass spectrometry (HPLC-QTRAP-MS/MS). The comprehensive quality of TH was assessed using multivariate statistical analysis, including principal components analysis (PCA) and technique for order preference by similarity to ideal solution (TOPSIS). The results showed that a high dose of TH extract could markedly ameliorate arthritis damage compared to other doses, with flavonoids playing an important role in the antirheumatic activity. The comprehensive quality of samples from Morus alba L. (SS) was superior to those from Liquidambar formosana Hance (FXS). The present study will demonstrate the markers associated with efficacy, and provide an applicable strategy for more comprehensive quality control and evaluation of TH.     

Modeling of a counterflow plasma reactor

Modeling of a counterflow plasma reactor is presented, using liquid injection for the synthesis of fine particles. An experimental reactor has been developed in this laboratory, and feasibility has been demonstrated for synthesizing advanced ceramic powders. The flow field calculations show two major recirculating regions which are of importance for increasing the particles' residence time inside of the reactor. In addition, the temperature within these recirculation zones remains relatively uniform. For simulation, water droplet trajectories have been calculated for droplets produced by an injection probe. It is shown that the droplets in a size range below 50 m in diameter will follow the streamlines and evaporate completely within a short traveling distance. This finding suggests that this reactor configuration provides a favorable environment for the synthesis of fine particles using liquid precursors.     

Competition between pi and non-pi cation-binding sites in aromatic amino acids: a theoretical study of alkali metal cation (Li+, Na+, K+)-phenylalanine complexes

To understand the cation-pi interaction in aromatic amino acids and peptides, the binding of M(+) (where M(+) = Li(+), Na(+), and K(+)) to phenylalanine (Phe) is studied at the best level of density functional theory reported so far. The different modes of M(+) binding show the same order of binding affinity (Li(+)>Na(+)>K(+)), in the approximate ratio of 2.2:1.5:1.0. The most stable binding mode is one in which the M(+) is stabilized by a tridentate interaction between the cation and the carbonyl oxygen (O[double bond]C), amino nitrogen (--NH(2)), and aromatic pi ring; the absolute Li(+), Na(+), and K(+) affinities are estimated theoretically to be 275, 201, and 141 kJ mol(-1), respectively. Factors affecting the relative stabilities of various M(+)-Phe binding modes and conformers have been identified, with ion-dipole interaction playing an important role. We found that the trend of pi and non-pi cation bonding distances (Na(+)-pi>Na(+)-N>Na(+)-O and K(+)-pi>K(+)-N>K(+)-O) in our theoretical Na(+)/K(+)-Phe structures are in agreement with the reported X-ray crystal structures of model synthetic receptors (sodium and potassium bound lariat ether complexes), even though the average alkali metal cation-pi distance found in the crystal structures is longer. This difference between the solid and the gas-phase structures can be reconciled by taking the higher coordination number of the cations in the lariat ether complexes into account.     

Electronic Structure of Fullerenelike Molecules Based on TiO2, SnO2, and SnS2

Quantum-chemical modeling of electronic structure and interatomic interaction parameters has been performed for a series of fullerenelike cage molecules based on the isoelectronic TiO₂, SnO₂, and SnS₂. The above characteristics are analyzed in relation to the type of atomic configuration, as well as the size and chemical composition of a nanostructure.     

An approach to computer-aided inhibitor design: Application to cathepsin L

Summary We have developed an approach to search for molecules that can be used as lead compounds in designing an inhibitor for a given proteolytic enzyme when the 3D structure of a homologous protein is known. This approach is based on taking the cast of the binding pocket of the protease and comparing its dimensions with that of the dimensions of small molecules. Herein the 3D structure of papain is used to model cathepsin L using the comparative modeling technique. The cast of the binding pocket is computed using the crystal structure of papain because the structures of papain and the model of cathepsin L are found to be similar at the binding site. The dimensions of the cast of the binding site of papain are used to screen for molecules from the Cambridge Structural Database (CSD) of small molecules. Twenty molecules out of the 80 000 small molecules in the CSD are found to have dimensions that are accommodated by the papain binding pocket. Visual comparison of the shapes of the cast and the 20 screened molecules resulted in identifying brevotoxin b, a toxin isolated from the red tide dinoflagellate Ptycho brevis (previously classified as Gymonodium breve), as the structure that best fits the binding pocket of papain. We tested the proteolytic activity of papain and cathepsin L in the presence of brevotoxin b and found inhibition of papain and cathepsin L with K_is of 25 M and 0.6 M, respectively. We also compare our method with a more elaborate method in the literature, by presenting our results on the computer search for inhibitors of the HIV-1 protease.     

Experimental and Theoretical Studies of a Pulsed Microwave Excited Ar/CF4 Plasma

The present work deals with a pulsed microwave discharge in an Ar/CF ₄ gas mixture under a low pressure (1–10 mbar). The discharge chamber developed has a cylindrical geometry with a coupling window alternatively made of quartz or alumina. The setup allows one to investigate the plasma–wall interactions (here etching of the quartz window) and the ignition process of the pulsed microwave plasma. Microwave pulses with a duration of 50–200 s and repetition rate between 1 and 10 kHz are typical for the experiments. The space-time behavior of the fluorine number density in the discharge has been investigated experimentally by optical actinometry. The discharge kinetics is modeled using electron-transport parameters and rate coefficients derived from solutions of the Boltzmann equation. Together with the solution of the continuity and electron balance equations and the rate equations describing the production of CF _x (x=2, 3, 4) radicals and F atoms, a good agreement between experimental and theoretical data can be achieved.