SYNTHESIS AND PROPERTIES OF SULFONATED POLY（ARYLENE ETHER） CONTAINING TRIPHENYL METHANE MOIETIES FROM ISOCYNATE MASKED BISPHENOL

A novel sulfonated poly（arylene ether） containing triphenylmethane moieties was synthesized by the sulfonation of a designed parent polymer using chlorosulfonic acid as sulfonation agent. The sulfonation took place at the para position of the pendant phenyl rings because of the specially designed parent polymer. The position and degree of sulfonation were characterized by ^1H-NMR and elemental analysis. The sulfonated polymers are highly soluble in common organic solvents, such as dimethylsulfoxide, N,N＇-dimethylacetamide, dimethylformamide, ethylene glycol monomethyl ether, and can be readily cast into tough and smooth films from solutions. The films showed good thermal and hydrolysis stabilities. Moreover, Fenton＇s reagent test revealed that the films exhibited superior stability to oxidation. The proton conductivities of the films were comparable with Nation 117 under same conditions. The membrane electrode assembly （MEA） prepared with the asmade film （706 EW, 100 μm dry thickness） shows better cell performance than Nation 115-MEA in the whole current density range.     

Synthesis of α, ω perfluoropolyether iodides

Perfluoropolyether (PFPE) diacyl halides of formula XCOCF₂O[(CF₂O)_n(CF₂CF₂O)_m]_pCF₂COX, with X = Cl, F and molecular weight (MW) 400-4000 g mol⁻¹ are smoothly converted in high yields to the corresponding α, ω diiodides in the absence of solvent, employing KI or LiI at 210 °C with extrusion of CO. During the reactions, β-elimination of COF₂ from the terminal difluoromethylene oxide units (CF₂O, C₁ unit) occurs to some extent until a tetrafluoroethylene oxide unit (OCF₂CF₂, C₂ unit) is encountered yielding a OCF₂CF₂I terminus. This considerably alters the MW distribution of the final diiodide especially for low MW PFPEs. Operating in supercritical conditions of CO (scCO) or both scCO and CO₂ (scCO₂) on low (<600 g mol⁻¹) MW diacyl halides, lowers β-elimination from 95 to 52 mol% if KI is used or from 43 to 30 mol% if LiI is used. With higher MW (>600 g mol⁻¹) β-elimination is lowered from 15 to <1 mol% in scCO conditions employing KI.     

Sample capacity in open tubular and micro-packed columns for GC

Equations have been derived from which the maximum sample size which may be loaded on a column without significantly affecting the performance may be calculated. It is shown that micro-packed columns can handle a sample which is as much as forty times larger than that which can be loaded onto wall-coated open tubular columns with comparable conditions.     

Cyclic esters of aliphatic diacids with pyrocatechol and hydroquinone

Cyclic esters of adipic acid, suberic acid and sebacic acid were prepared by reaction of the acid dichlorides and pyrocatechol or hydroquinone in benzene under high dilution conditions. While only the cyclic dimers could be obtained from hydroquinone, pyrocatechol formed cyclic monomers as well as cyclic dimers (and also a cyclic dimer with succinic acid). The structure of all compounds was confirmed by¹H-NMR- and mass spectra. The crystal structures of the pyrocatechol esters were determined by single crystal X-ray analysis.

---

Cyclische Ester aliphatischer Dicarbonsäuren mit Brenzcatechin und Hydrochinon

Zusammenfassung Es wurden cyclische Ester von Adipinsäure, Korksäure und Sebacinsäure durch Reaktion der entsprechenden Säure-Dichloride mit Brenzcatechin oder Hydrochinon bei hoher Verdünnung hergestellt. Während mit Hydrochinon lediglich die cyclischen Dimeren erhalten werden konnten, wurden mit Brenzcatechin sowohl cyclische Monomere als auch cyclische Dimere erhalten (ebenfalls das cyclische Dimer mit Bernsteinsäure). Die Strukturen wurden mittels¹H-NMR und Massenspektren gesichert. Die Kristallstrukturen der Brenzcatechin-Ester wurden mittels Röntgenstrukturanalyse bestimmt.

     

Study of the effect of different fiber coatings and extraction conditions on dry cured ham volatile compounds extracted by solid-phase microextraction (SPME)

Extraction of dry cured ham volatile compounds by solid-phase microextraction (SPME) was optimized. Different fiber coatings (carboxen/polydimethylsiloxane (CAR/PDMS), divinylbenzene/carboxen/polydimethylsiloxane (DVB/CAR/PDMS), polydimethylsiloxane (PDMS), polydimethylsiloxane/divinylbenzene (PDMS/DVB)), times of extraction (15, 30, 60 min) and sample preparation (ground samples and homogenates with NaCl saturated solution) were assayed. CAR/PDMS and DVB/CAR/PDMS fiber coatings extracted more than 100 volatile compounds and showed the highest area counts for most volatile compounds. CAR/PDMS coating extracted better those compounds whose Kovats index (KI) was lower than 980 (on average) and DVB/CAR/PDMS those with higher KI. Fifteen minutes of extraction provided a volatile compound profile with lower area counts for most compounds and qualitatively different to that obtained with 30 and 60 min of extraction. Homogenates gave a different profile compared to ground samples, with lower total counts for most compounds but higher proportion of aldehydes, and presence of several compounds not found in ground samples.     

Laboratory investigation of biodegradability of a polyurethane foam under anaerobic conditions

Polyurethane (PU) foams can be used in many remediation applications as an isolation material to prevent the release of hazardous materials into the environment. The integrity of a PU foam was investigated in this study using short-term accelerated laboratory experiments including bioavailability assays, soil burial experiments, and accelerated bioreactors to determine the fate of PU foam in the soil where anaerobic processes are dominant. The experimental results have shown that the studied PU foam is likely not biodegradable under anaerobic conditions. Neither weight loss nor a change in the tensile strength of the PU material after biological exposure was observed. The FT-IR chemical signature of the PU foams was also nearly identical before and after biological exposure. The composition of the PU material (aromatic polyester and polyether PU) used in this study could have played a significant role in its resistance to microbial attack during the short-term accelerated experiments.     

在酸性条件下合成氧化亚铜纳米立方体(英)

在微酸性(pH：4～6)的水热体系中130 ℃反应18 h合成了氧化亚铜纳米粒子，粒径约为100 nm，呈立方体外形。乙二胺和十六烷基胺在反应体系中充当缓冲试剂，调节反应液的pH值并控制体系中游离Cu²⁺的浓度，使得Cu²⁺不会被迅速还原成单质铜。所合成的纳米立方体的能带宽度约为2.51 eV，比氧化亚铜体材料和氧化亚铜纳米线蓝移了0.51 eV和0.17 eV，它有利于把太阳光谱中能量高的可见光转化成其他形式的能量。     

Solubility Behavior in Ternary Water-Salt Systems under Sub- and Supercritical Conditions

Summary.  Two main types of binary systems with distinctive solubility behavior under sub- and supercritical conditions were used to subdivide ternary water-salt systems into three classes. Characteristic features of solubility behavior and phase equilibria in ternary water-salt systems of each class at temperatures above 200°C are discussed on the basis of available experimental data and some conclusions obtained as a result of theoretical derivation of fluid and complete phase diagrams. Corresponding author. E-mail: Valyashko@IGIC.RAS.RU Received September 25, 2002; accepted (revised) November 28, 2002 Published online April 24, 2003 RID="a" ID="a" Dedicated to Prof. Dr. H. Gamsjaeger on the occasion of his 70^th birthday anniversary     

Optimum performance of capillary GC columns as a function of tube diameter and film thickness under various operating conditions. Computer program for calculation of H-ū curves and minimum analysis times

The Golay-Giddings and Poiseuille equations are used to derive equations for the calculation of the maximum plate number and minimum time conditions for given columns at fixed, but selectable, outlet pressures. In addition, expressions are presented for the determination of minimum analysis times for separation problems requiring given plate numbers. In this instance, the optimum column length can be calculated as a function of outlet pressure. A Basic computer program, incorporating the equations for the various optima, together with the H-ū curves, is described. Input variables are either column length or desired plate number, column diameter, film thickness, capacity ratio of the solute, column outlet pressure, seperation temperature, and carrier gas. The carrier gas viscosity is automatically calculated in the case of hydrogen, helium, or nitrogen. For these gases, and if the solute is a n-alkane, the diffusivity of the solute in the mobile phase is calculated. In this case, the carbon number of the solute is needed in the computation. For high molecular weight polydimethylsilicone phases (e.g. SE-30), the program can approximate the diffusivity of n-alkanes in the stationary phase at the given temperature as a function of the carbon number. Of course, manually entered values of viscosity and diffusion coefficients can be included in the calculations.     

Influence of quaternary onium salts,crown ethers and cryptands on olefin epoxidations promoted by HOCl/ClO− in the Presence of Mn(III)-tetrakis(2,6-dichlorophenyl)porphyrin chloride

Reaction rates of alkene epoxidations, promoted by aqueous NaOCl and catalyzed by Mn(III)-tetrakis(2,6-dichlorophenyl)porphyrin chloride1 (P) in the presence of a lipophilic axial ligand (L) (e.g.N-hexylimidazole) and carried out under H₂O/CH₂Cl₂ two phase conditions at 0°C, are strongly enhanced by lowering the pH of the aqueous phase from 12.7 to 9.5. Under these conditions, a further relevant increase in the reaction rates can be achieved by adding phase-transfer catalysts (PT), e.g. quaternary ammonium salt 3, lipophilic crown ether4 or cryptand5, provided that the amount of L is very small (L/P=1 for very reactive alkenes, e.g. cyclooctene, and 10 for poorly reactive ones, e.g. 1-dodecene). In the case of cyclooctene epoxidation, the use of 0.006–0.03 mol. equiv. of PT completes the reaction in 1–10 min., the initial rates being up to 600 turnovers/min. with (2.2.2,C₁₀) cryptand. In the absence of the axial ligand, the quaternary ammonium salt3 and cryptand5 show an inhibitory effect. Such an effect is due to the formation of the poorly reactive Mn(P)CI species, by Cl– extraction to the organic phase. However, dibenzo crown ether 4 does not show this effect. In the presence of 4, and with L/P =1, the 1-dodecene epoxidation reaches 94% in 1 min. The unique behavior of crown ethers can be explained by their ineffectiveness in extracting alkali chlorides, providing a very low concentration of Cl– in the organic phase and thus avoiding the Mn(III)-porphyrin deactivation.This paper is dedicated to the memory of the late Dr C. J. Pedersen.