新时代背景下大学物理基础课程教学的讨论

本文讨论的是＂以怎样的理念实施大学物理基础课程教学,才能使学生的学习训练获得最大收益＂.文章首先回顾近30年来教学思想随时代发展的变化,然后提出新时代背景下大学物理基础课程教学＂以学生为中心,使广大学生在知识、能力、素质上获得全面提高＂的新理念.     

温度和加热时间对大气环境中纯铁光谱发射率的影响

纯铁的光谱发射率受温度的影响很大,尤其是在大气环境中,由于温度升高加剧了表面的氧化,导致其光谱发射率发生了“无规律”变化。基于基尔霍夫定理,利用研制的反射法光谱发射率测量装置对纯铁1.55μm波长的光谱发射率进行了系统的研究,探讨了温度、加热时间等因素对纯铁光谱发射率的影响。研究结果表明：纯铁的光谱发射率随着温度的升高而增大,并且在一定的温度下出现了峰值和谷值,通过分析有氧化层时金属的发射率模型,解释了这种现象的发生。恒温长时间测量结果表明,在不同的温度下,加热时间对光谱发射率的影响不同。研究结果将进一步丰富纯铁的光谱发射率数据,并为其光谱发射率在大气环境中的应用提供了实验依据。     

液体冷媒融霜系统回液时间的实验研究

对液体冷媒融霜系统的回液时间进行实验研究。在保温体温度-15℃工况下分别对回液时间7s、27s、25s、30s、40s、50s进行实验,记录并分析被融霜蒸发器融霜前和回液时间内压缩机吸气口的温度和压力变化,相机拍摄制冷压缩机吸气口和机身的结霜状况。实验表明:回液时间7s时,压缩机吸气过潮,回液时间在27s左右可以避免压缩机吸气过潮,确保系统安全正常的运行,大于27s被融霜蒸发器恢复制冷时间过长将影响库房温度的稳定并降低制冷系统的效率。     

空地激光通信系统中捕获子系统仿真

针对空地激光通信系统,推导了复合光栅螺旋扫描捕获方法所需的最大捕获时间、平均捕获时间和捕获概率的计算公式,建立了捕获性能仿真模型,分析了捕获时间和捕获概率的关系,以及空中平台的相对速度对捕获系统的影响和抑制方法.仿真结果表明,当通信终端的捕获不确定区域为50mrad,扫描重叠因子为0.12时,捕获探测器的信噪比大于6时,空地激光通信系统总的捕获概率优于95%,最大捕获时间约为36s,平均捕获时间约为12s.     

基于北斗导航的车载监控系统

为了解决车辆失窃以及车内盗窃事件因缺乏有力的证据等问题无法侦破的困难,提出了一种基于北斗导航的车载监控系统;系统采用软硬件结合的开发方法,基于S3C6410开发板进行研发,使用LINUX作为操作系统,实现了图像采集、北斗卫星导航定位以及GPRS无线传输等功能;系统可实时监控汽车,10 s内通过短信方式快速提供车载位置和图像信息,有效减少汽车失窃事件的发生,也能为破案提供直接的证据,在基于我国自主的北斗导航应用方面实现了创新,系统工作快速、灵活、稳定,市场前景广阔。     

Experimental study of the relationships between the spectral emissivity of brass and the temperature in the oxidizing environment

Effect of surface oxidization on the spectral emissivity of brass is studied over the temperature range from 800 to 1070 K at the wavelength of 1.5 μm. The temperature of brass surface is measured by averaging the two R-type platinum–rhodium thermocouples. The radiant energy emitted by the brass surface is received by an InGaAs photodiode detector. Two kinds of relationships between the spectral emissivity and the temperature are investigated in the oxidizing environment at the elevated temperature. One is the variation of spectral emissivity with the heating-duration time at the given temperature. The other is the variation of spectral emissivity with the temperature at the given heating-duration time. The interference effect of radiation coming from the brass surface and coming from the oxidization film is discussed when the oxidation film on the surface is grown. The resonant structures of spectral emissivity are observed during the whole heating period, in particular at the early stage of heating duration. The analytic formula of spectral emissivity versus the temperature is derived at the heating-duration time of 30, 60, 90, 120, 150, 180, 210, 240, 270 and 300 min, respectively. The conclusion is obtained that coefficients of analytic expressions between the spectral emissivity and the temperature are different from each other for the experimental results obtained at the different heating-duration time, though the polynomial functional form is suitable to fit all the measurements obtained in the present work.     

Analyzing ultrafast multiplex coherent anti‐Stokes Raman spectra with picosecond probing

This article reports an efficient method to simulate time and frequency resolved coherent anti‐Stokes Raman scattering spectra measured with picosecond pump and probe fields and ultrashort Stokes pulses. A systematic comparison of measured and simulated time and frequency dependent data is presented for carbon tetrachloride, chloroform, cyclohexane, octane, and poly(methyl methacrylate). While the first compound exhibits no Raman active modes in the considered spectral region of the CH‐stretch vibrations, the other ones show Raman spectra of increasing complexity. Vibrational frequencies and homogeneous dephasing rates are extracted by fitting explicit analytical formulas to the recorded data. Interference between nonresonant and resonant contributions to the nonlinear polarization is taken fully into account. The ability to measure the influence of inhomogeneous broadening is discussed. Copyright © 2014 John Wiley & Sons, Ltd.     

Langevin dynamic simulation of hysteresis in a field-swept Landau potential

Numerical simulations are done of Langevin dynamics for a uniform-orderparameter, field-swept Landau model,= –|a/2|m ²+|b/4|m ⁴–mh(t) , to study hysteresis effects. The field is swept at a constant rateh(t)=h(0)+ht. The stochastic jump values of the field {h_J from an initially prepared metastable minimumm(0) are recorded, on passage to a global minimum m(). The results are: (a) The mean jump¯h _J(h) increases (hysteresis loop widens) with h, confirming a previous theoretical criterion based on rate competition between field-sweep and inverse mean first-passage time (FPT); (b) The broad jump distribution(h _J,h) is related to intrinsically large FPT fluctuations ( ²–²)/ ² O(1), and can be quantitatively understood. Possible experimental tests of the ideas are indicated.     

NIR光谱的LLE-PLS非线性建模方法及应用

传统的偏最小二乘(PLS)建模方法不能有效反映近红外(NIR)光谱与分析样本的物理化学性质之间存在的非线性关系。局部线性嵌入(LLE)是一种新的非线性降维方法,属于流形学习方法,它能有效地发现高维数据中的本真低维结构。结合LLE和PLS,提出一种近红外光谱非线性建模的新方法,并用于建立丹参多酚酸盐柱层析过程中丹酚酸B含量的回归校正模型。该方法首先用LLE对NIR光谱数据降维,再用PLS建立校正模型。结果表明,与多元散射校正、一阶导等预处理方法结合PLS建模比较,参数优化后的LLE-PLS方法能更准确地预测丹酚酸B的含量,其交叉验证均方根误差为0.128 mg·mL-1、决定系数为0.998 8。基于NIR光谱及LLE-PLS建模,可实现丹参多酚酸盐柱层析过程的在线检测。     

CVD金刚石薄膜探测器性能研究

通过实验测量和理论分析, 从载流子动力学角度研究了用于脉冲辐射探测的CVD金刚石薄膜探测器的适用结构、电荷收集效率和时间响应性能. 结果表明, CVD金刚石薄膜可以制成均匀型结构的探测器; 薄膜中的缺陷会降低探测器的电荷收集效率, 探测器的电荷收集效率随场强增大而增大直至饱和. 已研制的CVD金刚石探测器电荷收集时间可达719ps, 在2.5V/μm场强下达到饱和, 电荷收集效率 达60.5%; 晶格散射是影响探测器时间响应的主要因素, 选用大晶粒甚至单晶金刚石薄膜可以提高探测器时间响应.