低频标准真空涨落的测量

采用自平衡零拍方案, 对低频段的标准量子真空涨落进行了测量. 实验确定了该系统的饱和光功率约为3.2 mW. 在10 Hz–400 kHz的频率范围内, 系统的共模抑制比平均为55 dB, 在100 Hz处高达63 dB, 对激光经典技术噪声具有很强的抑制作用. 当入射光功率为400 μ W 时, 真空涨落噪声达到11 dB. 此低频量子真空噪声探测系统可广泛应用于量子计量和量子光学等研究领域.     

Stochastic resonance in an asymmetric bistable system driven by coloured correlated multiplicative and additive noise

This paper investigates the stochastic resonance （SR） phenomenon in an asymmetric system with coupling between multiplicative and additive noise when the coupling between two noise terms is coloured. The approximate expression of signal-to-noise ratio has been obtained by applying the two-state theory and SR exhibits in the bistable system. Moreover, the potential asymmetry r and cross-correlation strength λ can weaken the SR phenomenon, while the cross-correlation time r can strengthen the SR phenomenon.     

A numerical investigation of the influence of the aspect ratio in three‐dimensional separated flows

The influence of aspect ratio in three‐dimensional, numerical experiments of separated flows is studied in the case of the backward‐facing step at Reynolds numbers 600, 800, and 950. The computational domain is designed as an actual laboratory experiment. The governing equations are the steady state, isothermal, and incompressible Navier–Stokes equations. The expansion ratio of the computational domain is 1:2. The aspect ratio varies from 1:10 to 1:40. The results of the computations focus on the spanwise variations of the length and the strength of the two eddies along the lower and upper wall. It is concluded that both numerical and laboratory experiments should be designed with an aspect ratio of at least 1:20, if only the accuracy of the position of the detachment and the re‐attachment points matters. If the accuracy of the shear‐stress distributions is also taken into account, then an aspect ratio of at least 1:30 should be chosen. Finally, if the magnitudes of the vortex centers are also considered, then only the aspect ratio of 1:40 qualifies for a realization of two‐dimensional flow conditions in the plane of symmetry. This is contrary to the common practice in the field, at least from the side of laboratory experiments, where an aspect ratio of 1:10 is still considered adequate for this purpose. Copyright © 2011 John Wiley & Sons, Ltd.     

SYNTHESIS AND PROPERTIES OF ANILING ANILING AND 0-AMINOBENZENESULFONIC ACID COPOLYMER*

Poly(aniline- co-o-aminobenzenesulfonic acid) (PAOABSA) as a water soluble conducting polymerwas synthesized by chemical polymerization. The productivity and the room-temperature conductivity of thecopolymer were measured as a function of the reaction conditions, such as reaction temperature, the ratio ofoxidant to monomer and the degree of sulfonation defined as the ratio of sulfur to nitrogen atoms(S/N). Themain results obtained are summarized as follows : (1) lower reaction temperature (at about 0℃) is favorablefor the enhancement of the room-temperature conductivity of the copolymer; (2) higher content of oxidant isunfavorable for increasing the room-temperature conductivity of the copolymer; (3) both productivity androom-temperature conductivity of the copolymer decrease with increase of the degree of sulfonation whichwas always lower than 0.5 even an excess of o-aminobenzenesulfonic acid was added, probably because thereactivity ratio of aniline (γ=2.99± 0.05) is much higher than that of o-aminobenzenesulfonic acid (γ_2 = 0.06±0.02) estimated by using Fineman-Ross method and least square method.     

Gauss’ law of error revisited in the framework of Sharma-Taneja-Mittal information measure

We reformulate the Gauss’ law of error in presence of correlations which are taken into account by means of a deformed product arising in the framework of the Sharma-Taneja-Mittal measure. Having reviewed the main proprieties of the generalized product and its related algebra, we derive, according to the Maximum Likelihood Principle, a family of error distributions with an asymptotic power-law behavior.      

Orientational and electro-optical properties of liquid crystal aligned with a directly spinnable carbon nanotube web

We investigated the orientational and electro-optical properties of a nematic liquid crystal (LC) aligned with a directly spinnable carbon nanotube (CNT) web functioning both as an electrode and as an alignment layer. The LC molecules were uniformly oriented along the drawing direction of the CNT web and the spatially averaged birefringence was comparable to a rubbed polyimide sample. The CNT web sample also showed smaller residual DC and hysteresis compared to the polyimide sample.     

Naphthalene and benzene levels in microenvironments associated with potential exposure: new and old apartments with moth repellents,and cabins of passenger cars

A lesser degree of information is available with respect to microenvironments associated with potential exposure to naphthalene, in comparison with other volatile organic compounds. The current study investigated the levels of benzene as well as naphthalene, both in the indoor and outdoor air of apartments and in the cabins of passenger cars. Two groups of 20 apartment buildings (20 new and 20 old) were chosen on the basis of the selection criteria (apartment location and size). In addition, 10 actual commuters were recruited for this study. The equal number of drivers was recruited for the study for comparison of two types of fuels for vehicles (five drivers of gasoline-fuelled and five drivers of diesel-fuelled passenger cars). Indoor naphthalene concentrations were similar between old and new apartments, while the benzene concentrations in new apartments were significantly higher than those of old apartments. The naphthalene concentrations in bedrooms, where wardrobes with moth repellent (MRs) were placed, were significantly higher than those for living rooms where no MRs were present. In turn, these indoor concentrations were significantly higher than outdoor levels. It is noteworthy that the mean and median values of naphthalene measured in the bedrooms exceeded the USEPA RfC (inhalation reference concentration) of 3?µg?m^?3, and the living room values were close to the RfC, while the residential benzene levels exceeded the European benzene limit of 5?µg?m^?3. In contrast, the maximum outdoor levels were well below that of the RfC. The use of passenger cars appeared to be a significant daily activity for both naphthalene and benzene exposure. The naphthalene-to-benzene ratios varied with the type of microenvironments. Both the indoor naphthalene and benzene concentrations in the present study were much higher than those of other studies.     

Accurate intensity calibration for low wavenumber (−150 to 150 cm−1) Raman spectroscopy using the pure rotational spectrum of N2

We report on an accurate intensity calibration method for low wavenumber Raman spectroscopy. It uses the rotational Raman spectrum of N₂. The intensity distributions in the rotational Raman spectra of diatomic molecules are theoretically well established. They can be used as primary intensity standards for intensity calibration. The intensity ratios of the Stokes and anti‐Stokes transitions originating from the same rotational levels are not affected by thermal population. Taking the effect of rotation–vibration interactions appropriately into account, we are able to calculate these intensity ratios theoretically. The comparison between the observed and calculated ratios of the N₂ pure rotational spectrum provides an accurate relative sensitivity curve (error ~5 × 10⁻⁴) in the wavenumber region of −150 to 150 cm⁻¹. We determine the temperature of water solely from the low wavenumber Raman spectra, using a thus calibrated spectrometer. The Raman temperature shows an excellent agreement with the thermocouple temperature, with only 0.5 K difference. The present calibration technique will be highly useful in many applications of low wavenumber quantitative Raman spectroscopy. Copyright © 2015 John Wiley & Sons, Ltd.     

Scale-space point spread function based framework to boost infrared target detection algorithms

Small target detection is one of the major concern in the development of infrared surveillance systems. Detection algorithms based on Gaussian target modeling have attracted most attention from researchers in this field. However, the lack of accurate target modeling limits the performance of this type of infrared small target detection algorithms. In this paper, signal to clutter ratio (SCR) improvement mechanism based on the matched filter is described in detail and effect of Point Spread Function (PSF) on the intensity and spatial distribution of the target pixels is clarified comprehensively. In the following, a new parametric model for small infrared targets is developed based on the PSF of imaging system which can be considered as a matched filter. Based on this model, a new framework to boost model-based infrared target detection algorithms is presented. In order to show the performance of this new framework, the proposed model is adopted in Laplacian scale-space algorithms which is a well-known algorithm in the small infrared target detection field. Simulation results show that the proposed framework has better detection performance in comparison with the Gaussian one and improves the overall performance of IRST system. By analyzing the performance of the proposed algorithm based on this new framework in a quantitative manner, this new framework shows at least 20% improvement in the output SCR values in comparison with Laplacian of Gaussian (LoG) algorithm.