几何参数对喷射器性能的影响分析

运用计算流体动力学软件Fluent对喷射器进行数值模拟,研究了工作喷嘴喉部直径、等截面混合室直径和长度等几何参数对喷射器性能的影响,并对数值模拟结果进行了分析。研究表明:在一定的工况下,工作喷嘴及等截面混合室对喷射器性能有极大的影响,存在最佳的喉部和混合室直径使得喷射系数最大;随着混合室长度的增加,喷射器的喷射系数将逐渐降低。     

临近空间高空气球地基探测能力分析

基于探测系统背景辐射特性及高空气球辐射特性,建立了探测系统辐射接收模型.考虑大气传输、光学系统成像、探测器及其采样对辐射的影响,精确计算了高空气球辐射及背景辐射在探测器焦平面阵列上产生的信号电子数,推导出用于高空气球探测的信噪比.利用Modtran软件仿真计算了自身辐射、镜背景辐射、漫背景辐射亮度,分析了复杂大气条件下的气球辐射特性,及高空气球镜反射率、漫反射率与积分时间对探测系统信噪比的影响.结果表明:采用光谱滤波技术,在晴朗无云天气下,可见光近红外(0.6~2.4)探测器适合高空气球探测;在复杂大气条件下,长波红外(8~12)探测器适合高空气球探测;在积分时间为0.25s,镜反射率为0.32,漫反射率为0.68时,或积分时间为1s,镜反射率0.43,漫反射率0.57时,探测系统对高空气球探测能力最强.     

基于尺度质心统计的纹理分析

结合目前纹理分析的三类算法,提出了尺度质心统计的分析算法。该算法以具有多分辨率特性的小波包为基础,结合结构法的纹理元分析方式,采用区域质心完成局部特征提取,最后使用投影法进行整体的特征提取。实验证明,尺度质心统计取得了令人满意的纹理分析效果。     

A study on radial directional natural frequency and damping ratio in a vehicle tire

The measurement of radial directional natural frequency and damping ratio in a vehicle tire has been studied. Natural frequencies and damping ratios in the radial direction of various tires, from passenger car tires to truck bus tires, are reported. The radial direction modal parameters of tires subjected to different levels of inflation pressure, have been determined by using a frequency response function method. To obtain the theoretical natural frequency and mode shape, the plane vibration of a tire has been modeled as though it were that of a circular beam. By using the Tielking method that is based on Hamilton’s principle, theoretical results have been determined by considering the rotational velocity, tangential and radial stiffness, radial directional velocity and tension force which is due to tire inflation pressure. The results show that experimental conditions can be considered as the parameters that shift the natural frequency and damping ratio.     

Average kinetic energy of ions ejected from pure Coulomb explosions of methane clusters

We use an electrostatic model to study the average kinetic energy of ions ejected from the pure Coulomb explosions of methane clusters (CA4)n (light atom A=H and D). It is found that the ratio of the average kinetic energy of the ions to their initial average electrostatic potential energy is irrelevant to the cluster size. This finding implies that as long as the ratio is given, the average kinetic energies of the ions can be simply estimated from their initial average electrostatic potential energies, rather than from the time- consuming simulations. The ratios for the different charge states of carbon ions are presented.     

微槽道内气体流动特性的实验研究

搭建了微槽道的单相实验台,分析了氮气在不同深／宽比、长径比及水力直径的微槽道中流动特性。层流区的摩擦常数与理论预测值吻合较好（除L=20mm工况）,层流到湍流的转捩均有不同程度的提前（转捩Re数在1000左右）;在湍流区,槽道的长径比变小、相对粗糙度的增大（或水力直径的减小）及长度的减小可使流动阻力增大;拟合出了湍流区...     

Study on the denoising method for the electromagnetic ultrasonic echoes from multiple interfaces

The electromagnetic ultrasound is used in the detection of interfaces of the adhesive multilayer structures to solve the unstable coupling problem in ultrasonic testing by traditional piezoelectric transducers. Based on the analysis of the transforming mechanism of electromag-netic ultrasound energy and the resultant dead zone from mutual inductance of the transducer, the wavelet filtering by soft-thresholding and adaptive noise canceling methods are used simul-taneously to the detected electromagnetic ultrasonic signals to overcome the drawbacks of the low signal to noise ratio （SNR） and the wide intrinsic dead zone of the transducer. Processed results in the interface detection of a three layered adhesive sample of steel and rubber materials demonstrate that the wavelet filtering enhances the SNR about 12dB while the adaptive noise canceling narrows the dead zone effectively.     

光锥导光装置耦合效率分析与测试

介绍了光锥导光装置的优势,分析了影响光锥导光装置耦合效率的主要因素,得出了影响光锥导光装置耦合效率的理论模型误差曲线。以光锥端面反射损耗及光纤辐射损耗为主要误差源,测试了光锥导光装置的耦合效率及误差对耦合效率的影响;采用分光比标定的方法测量导光装置的耦合效率,消除了由于激光器输出能量变化给试验中脉冲能量测量环节带来的影响;根据试验测量数据,拟合出误差对耦合效率的影响曲线,通过与理论误差曲线进行对比,验证了理论模型的正确性,同时测得该耦合装置的耦合效率为70．26％。在激光束的入射角度误差〈5°,且在光纤耐受弯折允许范围内甩动光纤的情况下,总误差对耦合效率的影响〈10％,满足实际工程误差的允许范围。该耦合装置已经应用到实际工程中。     

小麦超弱延迟发光测试系统

应用一种新型高灵敏度光电倍增管作为传感器,设计一套用于检测小麦超弱发光的光子计数测量系统,实现对储藏小麦超弱发光的定量测量.适当安排LED阵列分布,设计适合延迟发光需要的照明系统,通过对白光LED光源辐射等效单光子能量和流明效率的计算,建立起光照度与光子数强度之间的联系,实现了光源照射强度与样品延迟发光强度之间的定量比较.对不同光照强度下小麦样品延迟发光的测试和双曲函数拟合,探讨了小麦超弱延迟发光双曲函数拟合参量的变化规律;发现不同照射强度下存在不同的饱和照射时间;小麦超弱延迟发光强度曲线符合双曲衰减规律,超弱延迟发光持续时间达数小时.通过对光照时间和数据采集时间的精确控制,以及在拟合函数中设置延迟时间参量因子,实现了延迟发光测试数据对应时间点的精确标定.     

气源MBE外延自组装GeSi量子点光致荧光研究

利用气源分子束外延设备（MBE）制作了GeSi自组装量子点样品。利用原子力显微镜（AFM）和光致荧光（PL）光谱研究了量子点的形貌和光学性质。气源MBE在较低温度下生长的量子点材料具有较高的量子点覆盖度。200K以下载流子以局域激子形式束缚在量子点中,激子束缚能约为17meV。升温至200K,载流子的输运过程发生变化。对量子点PL积分强度与温度关系曲线进行拟合得到量子点中空穴跃迁至浸润层的热激活能为129meV。