流动注射光度法同时测定铜基合金中的铝和铁

提出了同时测定铜基合金中铝和铁的流动注射分析法。以０．０４ｍｏｌ／ＬＨＣｌ作载液，铬天青Ｓ为显色剂，通过测定６２８ｎｍ处铝、铁两配合物的吸光度之和及铝配合物的吸光度，实现了两组分的同时测定。在优化的实验条件下，检测限：Ａｌ和Ｆｅ分别为１．６９×１０－３和１．７３×１０－３ｍｇ／Ｌ，Ａｌ浓度在０～０．８ｍｇ／Ｌ；Ｆｅ浓度在０～１．０ｍｇ／Ｌ时服从比耳定律。进样频率为６０样／ｈ，所拟方法用于实际样品分析，获得满意结果。     

Application of thermo-electrochemistry to simultaneous leaching of sphalerite and MnO2

In order to enhance the electrogenerative leaching rate of sphalerite reasonably, the basic principle of generative process was applied to the simultaneous leaching of sphalerite in the presence of MnO₂. It was confirmed by experimental results that both mental ions and electric energy could be obtained in the simultaneous electrogenerative leaching process. The leaching cell had the open circuit potential about 1.0 V, about 2000 C of electric quantity was obtained, the optimal leaching ratio of Zn²⁺ and Mn²⁺ was 48.5, 39.6% respectively, after electrogenerative leaching for 11 h.     

Treatment of coke plant wastewater by A/O fixed biofilm system

The long-term environmental impacts of wastewa-ter from coke plant can be very high, especially due to the discharge of large amounts of wastewater. The composition of coke plant wastewater is complicated and varies from one factory to another, depending …     

Chemometric data analysis of pollutants in wastewater—a case study

In this study, chemometric techniques such as cluster analysis (CA), discriminant analysis (DA), principal component analysis (PCA) and partial least squares (PLS) were used to analyse the wastewater dataset to identify the factors which affect the composition of sewage of domestic origin, spatial and temporal variations, similarity/dissimilarity among the wastewater characteristics of cis- and trans-drains and discriminating variables. Samples collected from 24 wastewater drains in Lucknow city and from three sites on Gomti river in the month of January/February, May, August and November during the period of 5 years (1994-1999) were characterized for 32 parameters. The multivariate techniques successfully described the similarities/dissimilarities among the sewage drains on the basis of their wastewater characteristics and sources signifying the effect of routine domestic/commercial activities in respective drainage areas. Spatial and seasonal variations in wastewater composition were also determined successfully. CA generated six groups of drains on the basis of similar wastewater characteristic. PCA provided information on seasonal influence and compositional differences in sewage generated by domestic and industrial waste dominated drains and showed that drains influenced by mixed industrial effluents have high organic pollution load. DA rendered six variables (TDS, alkalinity, F, TKN, Cd and Cr) discriminating between cis- and trans-drains. PLS-DA showed dominance of Cd, Cr, NO₃, PO₄ and F in cis-drains wastewater. The results suggest that biological-process based STPs could treat wastewater both from the cis- as well as trans-drains, however, prior removal of toxic metals will be required from the cis-drains sewage. Further, seasonal variations in wastewater composition and pollution load could be the guiding factor for determining the STPs design parameters. The information generated would be useful in selection of process type and in designing of the proposed sewage treatment plants (STPs) for safe disposal of wastewater.     

Fast Marching Method for Calculating Reactive Trajectories for Chemical Reactions

We present a method for computing classical Newtonian trajectories that minimize the path length or transit time from reactant to product. Our approach is based on a generalization of the fast-marching method, which allows us to construct the solution of the Hamilton-Jacobi equation for the action that optimizes the desired quantity. The resulting “reactive paths” can be interpreted as reaction coordinates but, unlike more conventional choices, they contain dynamical information about the chemical system of interest.     

Chemometric analysis of groundwater quality data of alluvial aquifer of Gangetic plain, North India

Water quality data set from the alluvial region in the Gangetic plain in northern India, which is known for high fluoride levels in soil and groundwater, has been analysed by chemometric techniques, such as principal component analysis (PCA), discriminant analysis (DA) and partial least squares (PLS) in order to investigate the compositional differences between surface and groundwater samples, spatial variations in groundwater composition and influence of natural and anthropogenic factors. Trilinear plots of major ions showed that the groundwater in this region is mainly of Na/K-bicarbonate type. PCA performed on complete data matrix yielded six significant PCs explaining 65% of the data variance. Although, PCA rendered considerable data reduction, it could not clearly group and distinguish the sample types (dug well, hand-pump and surface water). However, a visible differentiation between the water samples pertaining to two watersheds (Khar and Loni) was obtained. DA identified six discriminating variables between surface and groundwater and also between different types of samples (dug well, hand pump and surface water). Distinct grouping of the surface and groundwater samples was achieved using the PLS technique. It further showed that the groundwater samples are dominated by variables having origin both in natural and anthropogenic sources in the region, whereas, variables of industrial origin dominate the surface water samples. It also suggested that the groundwater sources are contaminated with various industrial contaminants in the region.     

Semi‐classical formulation of time‐dependent discrete variable representation method

In this article, we apply a novel time‐dependent discrete variable representation (TDDVR) method proposed by Barkakaty and Adhikari to investigate tunneling through an Eckart barrier. This semi‐classical method is theoretically rigorous and straightforward to implement. Among the TDDVR formulations, this report presents the first derivation of a rigorous form of quantum force (QF) for the present perspective. The validity of this semi‐classical approach is demanded based on the excellent agreement of the tunneling probability with the corresponding quantum results. © 2004 Wiley Periodicals, Inc. Int J Quantum Chem, 2004     

Process improvement in acetone-butanol production from hardwood by simultaneous saccharification and extractive fermentation

The acetone-butanol production by simultaneous saccharification and extractive fermentation (SSEF) was investigated. In the SSEF employing cellulase enzymes andClostridium acetobutylicum, both glucan and xylan fractions of pretreated aspen are concurrently converted into acetone and butanol. Continuous removal of the fermentation products from the bioreactor by extraction was an important factor that allowed long-term fed-batch operation. The use of membrane extraction prevented the problems of phase separation and extractant loss. Increase in substrate feeding as well as reduction of nutrient supply was found to be beneficial in suppressing the acid production, thereby improving the solvent yield. Because of prolonged low growth conditions prevalent in the fed-batch operation, the butanol-to-acetone ratio in the product was significantly higher at 2.6–2.8 compared to the typical value of two.     

丙酮中除虫脲溶液标准物质研制

采用重量-容量法制备丙酮中除虫脲溶液标准物质。准确称量国家二级标准物质除虫脲溶解到色谱纯丙酮中,通过A级容量瓶定容至500 mL,摇匀后分装到2 mL安瓿瓶内共460瓶,每瓶为1 mL,保持低温迅速封口,配制过程中室温保持在(20±2)℃。采用液相色谱法进行均匀性、稳定性检验和定值结果验证。从样品中随机抽取16瓶进行均匀性检验,经F检验表明,在95%的置信区间范围内该标准物质均匀性良好;采用t检验对标准物质稳定性进行检验,标准物质在12月内稳定性良好。对该标准物质的不确定度进行了评定,研制的丙酮中除虫脲溶液标准物质定值结果为100μg/mL,相对扩展不确定度为2%(k=2)。结果表明,该标准物质均匀性与稳定性良好,量值准确,可用于日常分析检测中的方法评价和仪器校准。     

Fermentation characteristics and the dynamic trend of chemical components during fermentation of Massa Medicata Fermentata

As a representative of traditionally fermented Chinese medicine, Massa Medicata Fermentata (MMF) shows the functions of invigorating the spleen and stomach and promoting digestion, which plays an important role in the treatment of gastrointestinal diseases. The fermentation mechanism and the key factors that affect the quality of MMF have not been revealed yet, which has become an urgent issue that limits its clinical application. This article aims to systematically and comprehensively reveal the transformation of physical properties and the dynamic trend of chemical components including substrate components, volatile components, and lactic acid as anaerobic fermentation product during MMF fermentation. Along with obvious hyphae growth observed for MMF, the weight of MMF decreased, and the moisture and temperature increased. Through the quantified 14 components from substrate, ferulic acid increased from 45.53 ± 6.94 to 141.89 ± 78.40 μg/g, while glycosides and phenolic acids declined except caffeic acid. Also, within the 66 volatile components analyzed, alcohols and acids increased, while aldehydes and ketones decreased. Lactic acid was not detected in the fermentation substrate, but an apparent increase in lactic acid content was observed along with the increased fermentation days, resulting in 2.54 ± 0.15 mg/g on day 8. Based on the tested components, the fermentation process of MMF was discriminated into three distinct stages by principal component analysis, and an optimal fermentation time of four days was proposed. The results of this study will be of great significance to clarify the characteristics of fermentation and conduce to improving quality standards of MMF.