Study of latent and etched tracks by a charged particle transmission technique

A recently suggested technique for non-destructive investigation of inhomogeneities in thin objects, which is based on the measurement of the energy spectra of charged particles transmitted through the object, is used for the study of thermal annealing of 10–20 μm thick polyethylene terephtalate, polypropylene and polycarbonate foils irradiated with 1–10 MeV/amu heavy ions. At elevated temperature a foil linear contraction is observed on pristine and irradiated material. Also the foil roughness increases with increasing temperature. On the same foils with etched pores 0.5–1.0 μm in diameter, the thermal annealing results in gradual closing of the pores up to about 30% of their initial diameter at the temperatures of 150–175°C. At higher temperatures the pore diameter increases and achieves its initial value.     

HELP法在中草药分析中的应用研究-冬虫夏草的化学成分测定

基于直观推导式演进特征投影（ＨＥＬＰ）法,对冬虫夏草子座和虫体分别进行了多组分同时定性定量测定．结果表明,ＨＥＬＰ法能减少样本提取分离的步骤,降低色谱分离条件的要求,提高检测准确度．联用色谱检测与化学计量学解析法相结合将为复杂中草药分析提供一种全新手段     

Near‐infrared spectroscopic studies on the cure behaviors of the CAE/DGEBA blend system initiated by a thermal latent catalyst

The latent properties and cure behaviors of an epoxy blend system based on cycloaliphatic epoxy (CAE) and diglycidyl ether of bisphenol A (DGEBA) epoxy containing N‐benzylpyrazinium hexafluoroantimonate (BPH) as a thermal latent initiator were investigated with near‐infrared (N‐IR) spectroscopy. The assignments of the latent properties and cure kinetics were performed by the measurements of the N‐IR reflectance for epoxide and hydroxyl functional groups at different temperatures and compositions. As a result, this system showed more than one type of reaction, and BPH was an excellent thermal latent catalyst without any coinitiator. The cure behaviors were identified by the changes in the absorption intensity of the hydroxyl groups at 7100 cm⁻¹ with different composition ratios. Moreover, characteristic N‐IR band assignments were used to evaluate the reactive kinetics and were shown to be an appropriate method for studying the cure behaviors of the CAE/DGEBA blend system containing a thermal latent catalyst. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 326–331, 2001     

Observation of latent tracks formed by heavy ion irradiation in poly(methyl methacrylate)

The irradiation effect in poly(methyl methacrylate) changed from main‐chain scission to crosslinking, depending on the stopping powers of the Au and Xe ions irradiated with high stopping powers. The latent ion tracks, including an end of the ion range in the polymer, were observed clearly by field emission and atomic force microscopies. Additionally, it was also observed that a crosslinked structure (formed by nuclear stopping) existed across an end of the ion range calculated by a Transport of Ion in Matters code, and it was different from that formed by electronic stopping. The nuclear stopping of the heavy ions can play an important role around the end of the ion range in the polymer. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 757–762, 2001     

Encoding Individual Source Sequences for the Wiretap Channel

We consider the problem of encoding a deterministic source sequence (i.e., individual sequence) for the degraded wiretap channel by means of an encoder and decoder that can both be implemented as finite-state machines. Our first main result is a necessary condition for both reliable and secure transmission in terms of the given source sequence, the bandwidth expansion factor, the secrecy capacity, the number of states of the encoder and the number of states of the decoder. Equivalently, this necessary condition can be presented as a converse bound (i.e., a lower bound) on the smallest achievable bandwidth expansion factor. The bound is asymptotically achievable by Lempel–Ziv compression followed by good channel coding for the wiretap channel. Given that the lower bound is saturated, we also derive a lower bound on the minimum necessary rate of purely random bits needed for local randomness at the encoder in order to meet the security constraint. This bound too is achieved by the same achievability scheme. Finally, we extend the main results to the case where the legitimate decoder has access to a side information sequence, which is another individual sequence that may be related to the source sequence, and a noisy version of the side information sequence leaks to the wiretapper.     

Preparation,characterization, and performance study of beeswax/expanded graphite composite as thermal storage material

In this study, beeswax as a new energy storage material and its composite with expanded graphite were prepared and characterized for their surface and thermal properties. Surface characterization showed no chemical interaction between beeswax and expanded graphite. The thermal conductivity of the composite was improved with 117% enhancement. The thermal performance of beeswax and its composite as a heat storage material was studied in a rectangular shell-and-tube thermal storage unit. The melting point of the composite remained almost same as that of beeswax; however, the melting time was reduced considerably, from 540 to 360 min with inlet water at 80°C and a 2-lpm flow rate.     

Using the Semantic Information G Measure to Explain and Extend Rate-Distortion Functions and Maximum Entropy Distributions

In the rate-distortion function and the Maximum Entropy (ME) method, Minimum Mutual Information (MMI) distributions and ME distributions are expressed by Bayes-like formulas, including Negative Exponential Functions (NEFs) and partition functions. Why do these non-probability functions exist in Bayes-like formulas? On the other hand, the rate-distortion function has three disadvantages: (1) the distortion function is subjectively defined; (2) the definition of the distortion function between instances and labels is often difficult; (3) it cannot be used for data compression according to the labels’ semantic meanings. The author has proposed using the semantic information G measure with both statistical probability and logical probability before. We can now explain NEFs as truth functions, partition functions as logical probabilities, Bayes-like formulas as semantic Bayes’ formulas, MMI as Semantic Mutual Information (SMI), and ME as extreme ME minus SMI. In overcoming the above disadvantages, this paper sets up the relationship between truth functions and distortion functions, obtains truth functions from samples by machine learning, and constructs constraint conditions with truth functions to extend rate-distortion functions. Two examples are used to help readers understand the MMI iteration and to support the theoretical results. Using truth functions and the semantic information G measure, we can combine machine learning and data compression, including semantic compression. We need further studies to explore general data compression and recovery, according to the semantic meaning.     

Melting temperature and enthalpy variations of phase change materials (PCMs): a differential scanning calorimetry (DSC) analysis

Differential scanning calorimetry (DSC) analysis is a standard thermal analysis technique used to determine the phase transition temperature, enthalpy, heat of fusion, specific heat and activation energy of phase change materials (PCMs). To determine the appropriate heating rate and sample mass, various DSC measurements were carried out using two kinds of PCMs, namely N-octadecane paraffin and calcium chloride hexahydrate. The variations in phase transition temperature, enthalpy, heat of fusion, specific heat and activation energy were observed within applicable heating rates and sample masses. It was found that the phase transition temperature range increased with increasing heating rate and sample mass; while the heat of fusion varied without any established pattern. The specific heat decreased with the increase of heating rate and sample mass. For accuracy purpose, it is recommended that for PCMs with high thermal conductivity (e.g. hydrated salt) the focus will be on heating rate rather than sample mass.     

Speech-Music-Noise Discrimination in Sound Indexing of Multimedia Documents

Sound indexing and segmentation of digital documents especially in the internet and digital libraries are very useful to simplify and to accelerate the multimedia document retrieval. We can imagine that we can extract multimedia files not only by keywords but also by speech semantic contents. The main difficulty of this operation is the parameterization and modelling of the sound track and the discrimination of the speech, music and noise segments. In this paper, we will present a Speech/Music/Noise indexing interface designed for audio discrimination in multimedia documents. The program uses a statistical method based on ANN and HMM classifiers. After pre-emphasis and segmentation, the audio segments are analysed by the cepstral acoustic analysis method. The developed system was evaluated on a database constituted of music songs with Arabic speech segments under several noisy environments.     

钐钆共掺杂荧光配合物的合成及在潜手印显现中的应用

以2-噻吩甲酰三氟丙酮(TTA)为第一配体,邻菲罗啉(o-Phen)为第二配体,利用共沉淀法合成一系列钐钆共掺杂荧光配合物,并优化了该系列荧光配合物的合成条件(反应温度、体系pH、稀土离子相对含量).将最优条件合成的Sm0.5 Gd0.5 TTA3(o-Phen)荧光配合物粉末用于常见光滑非渗透性客体表面潜在手印的显现...