Numerical Modeling of Interior Ballistics Processes in Light Gas Guns

An improved procedure for modeling the operation of a light-gas gun is proposed. The motion of working bodies in both the firing chamber and the light-gas chamber is studied within the framework of the mechanics of heterogeneous media. The problem of barrel heating taking into account its melting and removal of thermal ablation products into the medium inside the bore is solved in a coupled formulation. Heat and mass transfer and friction on the barrel surface are calculated using empirical dependences. The deformable piston is considered compressible and elastoviscoplastic. Allowance is made for the presence of a clearance between the lateral surface of the piston and the barrel bore walls and the associated gas flow between the firing and the light-gas chamber. Calculation results are given.     

Facility for preparation of gas mixture in muon catalyzed fusion experiments

A facility is described that allows safe handling of high tritium gas activity as dozens kilocuries in a regular laboratory environment. It is used to make and deliver into the target a mixture of specific isotopic composition with the contamination requirement of 10^-7 v.f. for Z>1 elements, and recover it upon completion of operation. With this facility, efforts have been accomplished to investigate into the muon catalyzed fusion on two targets – liquid tritium and high-pressure tritium types. Also, the operation range was 0.1–120 MPa for pressure and 20–800 K for temperature and the amount of tritium used was about 100 kCi. The facility showed reliability in operation without indications of radiation beyond the safety level. This revised version was published online in August 2006 with corrections to the Cover Date.     

尾年金分布的存在性和结构

本文主要是在年金分布的基础上, 推广、定义并研究了一类$r$尾年金分布的存在性和结构, 给出了这类分布的存在性条件, 证明了在一定条件下, $r$尾年金分布是年金分布与某一特殊$r$尾年金分布的混合.     

气固射流床射流深度的研究

在３００×５１×２６００ｍｍ的二维射流床中，采用多路毕托管测试系统，对包括三种双组份混合物在内的五种物料的射流深度进行了考察。结果表明，射流管径、射流气速对射流深度都有影响，本文尤其考察了环隙气量与射流深度的关系，发现在同样的射流气速下，环隙气速增大则射流深度降低，得出了综合各种影响因素的关联式。     

Synthesis of Cu–Cr diketo,sublimable, eutectic composite complex,rod crystals from LDH as suitable MOCVD precursor of CuCr2O4 catalysts upon ceramic preforms for N2O decomposition

Metal-acteylacetonates are important sublimable metal-organic precursors for metal-oxide thin film formation over solid preforms by MOCVD (Metal Organic Chemical Vapour Deposition) technique. Mixed-metal-acetylacetonates (MMAA) are suitable starting materials for mixed metal nano-oxidic thin film formation through such facile routes. Layered Double Hydroxides (LDH) of suitable metal ion combination can perform as appropriate starting base for neutralisation by enol form of 2,4-pentanedione or acteylacetonate tautomer ligands to obtain such MMAA. In this paper synthesis of composite crystals of Cu(II)/Cr(III) acetylacetonates (CCAA) is reported by the reaction of Cu–Cr-LDH with acetylacetone. The products were characterized by various different techniques. The surface area and pore volume analysis of the crystals showed the formation of nanopores in the compound. TEM analysis confirmed that the inner core of the nanoporous crystals of Cu(acac)₂ was covered by coating of poorly crystallised Cr(acac)₃ and they together form the composite crystals, and they together form the composite crystals. Due to eutectic mixture formation the melting point of CCAA lies in between the melting points of individual components Cu(acac)₂ and Cr(acac)₃ and shows sublimability, a property important for the formation of MOCVD films. The composite was used for CuCr₂O₄ spinel mixed oxide films formation over solid ceramic honeycomb monolithic substrates. Application prospects of the route in the field of catalysis is high as it can directly combine the benefits of mixed metal oxide catalysis and structured supports without the involvement of a third component. In this work the performance of such a catalytic device has been tested for low temperature decomposition of high Global Warming Potential (GWP) gas N₂O to N₂ and O₂.     

Comparison of solvent mixtures for pressurized solvent extraction of soil fatty acid biomarkers

The extraction and transesterification of soil lipids into fatty acid methyl esters (FAMEs) is a useful technique for studying soil microbial communities. The objective of this study was to find the best solvent mixture to extract soil lipids with a pressurized solvent extractor system. Four solvent mixtures were selected for testing: chloroform:methanol:phosphate buffer (1:2:0.8, v/v/v), chloroform:methanol (1:2, v/v), hexane:2-propanol (3:2, v/v) and acetone. Soils were from agricultural fields and had a wide range of clay, organic matter and microbial biomass contents. Total lipid fatty acid methyl esters (TL-FAMEs) were the extractable soil lipids identified and quantified with gas chromatography and flame ionization detection. Concentrations of TL-FAMEs ranged from 57.3 to 542.2 n mole g⁻¹ soil (dry weight basis). The highest concentrations of TL-FAMEs were extracted with chloroform:methanol:buffer or chloroform:methanol mixtures than with the hexane:2-propanol or acetone solvents. The concentrations of TL-FAMEs in chemical groups, including saturated, branched, mono- and poly-unsaturated and hydroxy fatty acids were assessed, and biological groups (soil bacteria, mycorrhizal fungi, saprophytic fungi and higher plants) was distinguished. The extraction efficiency for the chemical and biological groups followed the general trend of: chloroform:methanol:buffer ≥ chloroform:methanol > hexane:2-propanol = acetone. Discriminant analysis revealed differences in TL-FAME profiles based on the solvent mixture and the soil type. Although solvent mixtures containing chloroform and methanol were the most efficient for extracting lipids from the agricultural soils in this study, soil properties and the lipid groups to be studied should be considered when selecting a solvent mixture. According to our knowledge, this is the first report of soil lipid extraction with hexane:2-propanol or acetone in a pressurized solvent extraction system.     

表面活性剂混合物水溶液中的囊泡形成

1:1烷基羧酸钠-溴化烷基三甲铵混合水溶液的浓度在cmc以上时, 能自发或超声分散形成一类新型混合表面活性剂囊泡(单层膜), 正负离子表面活性剂的突出囊泡形成能力以及不同表面活性剂结构组合变化所显现的多样特性, 皆预示出混合功能有序组合体研究的广阔前景。     

一种中高温热泵混合工质的实验研究

提出了一种适用于90-110℃冷凝温度范围的HFC类中高温热泵非共沸混合工质,其理论循环性能优于CFC114,实测COP为纯工质HFC245fa的97.2%-130.6%、制热量高于HFC245fa。     

聚乙烯醇／壳聚糖共混膜优先透醇性能的研究

聚乙烯醇／壳聚糖共混膜优先透醇性能的研究王新平，沈之荃，张富尧，林荣轩（浙江大学高分子系，化学系，杭州，３１００２７）关键词渗透蒸发，聚乙烯醇／壳聚糖共混物膜，乙醇水溶液本文首次报道利用亲水性的聚乙烯醇和壳聚糖制得具有很高的乙醇优先透过选择性的透醇型...