浓悬浮体的屈服应力和最大填充率

对剪切稀化的浓悬浮体，假设在剪切状态下结构参数变化的速率服从一级动力学关系，在此基础上导出浓悬浮体最大填充率与剪应力、屈服应力与填充率之间关系的数学模型．用硅粉－甘油水溶液及可可粉－可可脂两种悬浮体的实验确认了模型对工业微米级颗粒悬浮体的适用性     

伸缩张量率的抽象表示

本文用“主轴内蕴法”给出右-左伸缩张量 U 和 V 的时间导数 U 和 V 的抽象表示。文中引进所谓“分离技巧”,使能有效地应用张量函数的标准表示。V 的表达式是新的。还给出U 和 V 的两个新关系式。     

Indentation tests investigation of mechanical behavior of two-dimensional materials

准确了解二维材料的力学性能对于推动其应用具有重要意义, 无基底压痕技术是目前最广泛采用的二维材料力学性能测试方法之一, 本文综述了二维材料压痕研究的最新进展以及所面临的问题, 并对将来的研究工作进行了展望.无基底压痕技术是将二维材料转移到带有沟槽或柱形孔的基底上, 制备二维材料"梁"和"鼓"模型, 然后利用原子力显微镜测量其在压针作用下的载荷--位移关系, 最后通过基于连续介质薄膜导出的压痕响应分析模型拟合实验结果, 估算出二维材料的弹性模量和本征强度.由于二维材料的厚度远小于连续介质薄膜, 来自于压头以及基底孔侧壁的范德华力对二维材料的压痕响应具有显著影响, 造成二维材料与传统压痕分析模型中的基本假设不符, 导致不能准确预测二维材料的弹性模量; 另外, 由于传统压痕模型无法准确描述二维材料在大变形下的非线性行为, 以及由缺陷等引起的应力集中, 导致由压痕测试表征的二维材料(特别是多晶二维材料)本征强度具有较大的偏差. 因此, 一方面需要正确了解由压痕技术获得的二维材料力学性能, 另一方面还需对目前的研究方法做进一步的改进和完善.     

悬链曲面上的点粒子动力学及扩展空间约束系统量子化

扩张型正则量子化方案的核心内容是位置、动量以及哈密顿量同时量子化. 通过分析悬链面上粒子的扩张型正则量子化方案, 并且与薛定谔理论进行比较, 发现内禀几何中二维悬链面给不出与薛定谔理论相一致的结果, 而考虑将二维悬链面嵌入在三维欧氏空间之后, 还需要将正则量子化方案进行扩张, 可以得到体系的几何势能和几何动量, 并与薛定谔理论相一致.     

关于随机算子若干问题的研究

研究了新的随机不动点指数的计算问题,利用随机不动点指数的理论推广了著名的Amann定理.提出了随机算子的随机渐进歧点的新概念,并且研究了随机k(ω)-集压缩算子的随机渐进歧点的一些问题,也得到了若干新的结果.     

Effect of Intrinsic Decoherence of Milburn＇s Model on Entanglement of Two-Qutrit States

We analyze the time evolution of entanglement of two-qutrit system within the framework of Milburn's model of intrinsic decoherence. The entanglement evolution relies not only on the parameters of system, but also on the concrete states either pure or mixed. The linear entropy used to measure the extent to which the intrinsic decoherence affects quantum states is evaluated.     

紫外熔石英元件高精度低缺陷控形控性制造技术研究进展

传统的紫外熔石英元件加工方法本身会引入各类制造缺陷,需要后期加工来消除前期加工带来的缺陷,限制了熔石英元件的加工 质量和加工效率。针对这些问题,课题组提出了采用磁流变、离子束、保形光顺和流体动压抛光等可控柔体加工技术提升熔石英元件的加工效果,并开展了相关研究。主要介绍了课题组在关键技术上取得的重要进展,包括亚纳米精度表面控形制造技术、纳米精度本征表面控性生成方法、熔石英元件高精度低缺陷组合工艺与设备等一系列关键技术。通过探讨关键技术及其发展现状,为未来紫外熔石英元件高精度低缺陷制造技术的发展提供参考。     

硅烷浓度对微晶硅太阳电池的影响

采用甚高频等离子化学气相沉积技术(VHF-PECVD)制备了系列p-i-n型微晶硅太阳电池,研究了电池有源层硅烷浓度的变化对电池性能的影响.结果发现:随着硅烷浓度的提高电池的短路电流密度先提高然后降低,转换效率与之有相同的变化趋势,而开路电压随硅烷浓度的提高而增加,这些变化来源于有源层材料结构的改变.电池的填充因子几乎不受硅烷浓度的影响,但受前电极的影响很大.不同系列电池转化效率的最高点虽然处于非晶到微晶的过渡区,但对应电池的晶化率不同.另外,研究结果也给出非晶/微晶过渡区随着辉光功率的提高和沉积气压的降低向高硅烷浓度方向转移.     

The Cross-Sectional Intrinsic Entropy—A Comprehensive Stock Market Volatility Estimator

To take into account the temporal dimension of uncertainty in stock markets, this paper introduces a cross-sectional estimation of stock market volatility based on the intrinsic entropy model. The proposed cross-sectional intrinsic entropy (CSIE) is defined and computed as a daily volatility estimate for the entire market, grounded on the daily traded prices—open, high, low, and close prices (OHLC)—along with the daily traded volume for all symbols listed on The New York Stock Exchange (NYSE) and The National Association of Securities Dealers Automated Quotations (NASDAQ). We perform a comparative analysis between the time series obtained from the CSIE and the historical volatility as provided by the estimators: close-to-close, Parkinson, Garman–Klass, Rogers–Satchell, Yang–Zhang, and intrinsic entropy (IE), defined and computed from historical OHLC daily prices of the Standard & Poor’s 500 index (S&P500), Dow Jones Industrial Average (DJIA), and the NASDAQ Composite index, respectively, for various time intervals. Our study uses an approximate 6000-day reference point, starting 1 January 2001, until 23 January 2022, for both the NYSE and the NASDAQ. We found that the CSIE market volatility estimator is consistently at least 10 times more sensitive to market changes, compared to the volatility estimate captured through the market indices. Furthermore, beta values confirm a consistently lower volatility risk for market indices overall, between 50% and 90% lower, compared to the volatility risk of the entire market in various time intervals and rolling windows.     

Fluorescent Probes and Quenchers in Studies of Protein Folding and Protein-Lipid Interactions

Fluorescence spectroscopy provides numerous methodological tools for structural and functional studies of biological macromolecules and their complexes. All fluorescence-based approaches require either existence of an intrinsic probe or an introduction of an extrinsic one. Moreover, studies of complex systems often require an additional introduction of a specific quencher molecule acting in combination with a fluorophore to provide structural or thermodynamic information. Here, we review the fundamentals and summarize the latest progress in applications of different classes of fluorescent probes and their specific quenchers, aimed at studies of protein folding and protein-membrane interactions. Specifically, we discuss various environment-sensitive dyes, FRET probes, probes for short-distance measurements, and several probe-quencher pairs for studies of membrane penetration of proteins and peptides. The goals of this review are: (a) to familiarize the readership with the general concept that complex biological systems often require both a probe and a quencher to decipher mechanistic details of functioning and (b) to provide example of the immediate applications of the described methods.