Intrinsically microporous polyimides containing spirobisindane and phenazine units: Synthesis,characterization and gas permeation properties

A new diamine containing spirobisindane and phenazine units, namely, 3,3,3′,3′‐tetramethyl‐2,2′,3,3′‐tetrahydro‐1,1′‐spirobi[cyclopenta[b]phenazine]‐7,7′‐diamine (TTSBIDA) was synthesized starting from commercially available 5,5′,6,6′‐tetrahydroxy‐3,3,3′,3′‐tetramethyl‐1,1′‐spirobisindane (TTSBI). TTSBI was oxidized to 3,3,3′,3′‐tetramethyl‐2,2′,3,3′‐tetrahydro‐1,1′‐spirobi[indene]‐5,5′,6,6′‐tetraone (TTSBIQ) which was subsequently condensed with 4‐nitro‐1,2‐phenylenediamine to obtain 3,3,3′,3′‐tetramethyl‐7,7′‐dinitro‐2,2′,3,3′‐tetrahydro‐1,1′‐spirobi[cyclopenta[b]phenazine] (TTSBIDN). TTSBIDN was converted into TTSBIDA by reduction of the nitro groups using hydrazine hydrate in the presence of Pd/C as the catalyst. A series of new polyimides of intrinsic microporosity (PIM‐PIs) were synthesized by polycondensation of TTSBIDA with commercially available aromatic dianhydrides. PIM‐PIs exhibited amorphous nature, high thermal stability (T₁₀ > 480 °C) and intrinsic microporosity (BET surface area = 59–289 m²/g). The gas permeation characteristics of films of selected PIM‐PIs were evaluated and they exhibited appreciable gas permeability as well as high selectivity. The CO₂ and O₂ permeability of PIM‐PIs were in the range 185.4–39.2 and 30.6–6.2 Barrer, respectively. Notably, polyimide derived from TTSBIDA and 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride (PIM‐PI‐6FDA) exhibited high CO₂ and O₂ permeability of 185.4 and 30.6 Barrer with CO₂/CH₄ and O₂/N₂ selectivity of 43.1 and 5.1, respectively. The data of PIM‐PI‐6FDA for CO₂/CH₄ and O₂/N₂ gas pairs were located near Robeson upper bound. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 766–775     

Morphological study of an intrinsically stretchable photovoltaic bulk heterojunction

Thin‐film polymer solar cell consisting of [6,6]‐phenyl‐C71‐butyric acid methyl ester (PC₇₁BM) and poly[[4,8‐bis[(2‐ethylhexyl)oxy]benzo[1,2‐b:4,5‐b′]dithiophene‐2,6‐diyl][3‐fluoro‐2‐[(2‐ethylhexyl)carbonyl]thieno[3,4‐b]thiophenediyl]] (PTB7) demonstrates elastic stretchability with the aid of a high boiling point additive, 1,8‐diiodooctane (DIO). The usage of DIO not only helps to form uniformly distributed nanocrystalline grains, but may also create free volumes between the nano‐grains that allow for relative sliding between the nano‐grains. The relative sliding can accommodate large external deformation. Large dichroic ratios of the optical absorption of both PC₇₁BM and PTB7 were observed under large‐strain deformation, indicating reorientation of the nanocrystalline PC₇₁BM and PTB7 polymer chains along stretching direction. The dichroic ratio decreases to nearly 1.0 as the blend was relaxed to 0% strain. Therefore, the nanometer‐size grain blending morphology provides an approach to impart stretchability to organic semiconductors that are otherwise un‐stretchable. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 814–820     

Intrinsic Crosslinking and Gel-Breaking Rheokinetics of CMHEC/CTAB Systems

The intrinsic rheokinetics of carboxymethyl hydroxyethyl cellulose and cetyltrimethyl ammonium bromide (CMHEC/CTAB) synergistic fracturing fluid in static crosslinking and gel-breaking processes were studied in this work. Microrheological properties including solid–liquid balance (SLB) and elasticity index (EI) during the static crosslinking and gel-breaking processes were obtained. The effects of temperature on the crosslinking process, concentration of gel-breaker (ammonium persulfate), and temperature on the gel-breaking process were investigated. The novel intrinsic crosslinking and gel-breaking rheokinetics equations were established, respectively. The results show that the crosslinking process can be divided into two stages, and the intrinsic crosslinking rheokinetics equation can well describe EI curves during the static crosslinking process at different temperatures. The EI curves during the gel-breaking process can be well described by the intrinsic gel-breaking rheokinetics equation. The parameters for these two rheokinetics equations are well-defined and reasonable.     

Dynamic and static nature of activated interactions in transition states as elucidated by quantum theory of atoms-in-molecules dual functional analysis: A case of ligand exchange at the N of sulfonylimino-λ3-bromanes

A method to elucidate the dynamic and static natures of the activated interactions in transition states (TSs) is proposed using quantum theory of atoms-in-molecules (QTAIM) dual functional analysis (QTAIM-DFA). The natures are determined for the ligand exchange at the N of sulfonylimino-λ³-bromanes, RBr-*-N(SO₂CF₃)-*-X′R′ (R, R′ = Me or Ph, X′ = Br′ or I′). Asterisks (*) emphasize the presence of bond critical points within the interactions in question. While data from the optimized structures of TSs correspond to the static nature, those from the perturbed and optimized structures represent the dynamic nature. The nature of the interactions in Br-*-N-*-X′ calculated with QTAIM-DFA, using the perturbed structures generated using the normal coordinates for the imaginary frequencies (NIV), was very similar to that in trigonal bipyramidal adduct formation through charge transfer. The results with NIV were precisely the same as those obtained based on intrinsic reaction coordinate (IRC). The high applicability of QTAIM-DFA is demonstrated when analyzing the activated interactions in TSs.     

Research Progress on Typical Quaternary Ammonium Salt Polymers

Quaternary ammonium salt polymers, a kind of polyelectrolyte with a quaternary ammonium group, are widely used in traditional and emerging industries due to their good water-solubility, adjustable cationicity and molecular weight, high efficiency and nontoxicity. In this paper, firstly, the properties and several synthesis methods of typical quaternary ammonium salt monomers were introduced. Secondly, the research progress on the synthesis of polymers was summarized from the perspective of obtaining products with high molecular weight, narrow molecular weight distribution and high monomer conversion, and special functional polymers. Thirdly, the relationships between the structures and properties of the polymer were analyzed from the perspectives of molecular weight, charge density, structural stability, and microstructural regulation of the polymer chain unit. Fourthly, typical examples of quaternary ammonium salt polymers in the application fields of water treatment, daily chemicals, petroleum exploitation, papermaking, and textile printing and dyeing were listed. Finally, constructive suggestions were put forward on developing quaternary ammonium salt polymers with high molecular weights, strengthening the research on the relationships between the structures and their properties and pinpointing relevant application fields.     

介观化学体系中的动力学尺度效应

以生命和表面催化体系为对象,研究了介观化学体系中内涨落对体系非线性动力学行为的调控作用。内涨落可以诱导随机振荡,其强度在体系处于最佳尺度时会出现一个甚至多个极大值,并且在耦合体系中会得到进一步增强,表现为尺度共振效应、尺度选择效应和双重尺度效应,揭示了介观化学体系中尺度效应的新机制。     

聚二乙基二烯丙基氯化铵的合成与表征

以二乙基二烯丙基氯化铵为原料采用过硫酸盐水溶液引发体系合成了聚二乙基二烯丙基氯化铵(PDEDAAC).探讨了单体、引发剂和助剂EDTA的浓度及温度对产物的特性粘数和单体转化率的影响,确定了适宜的工艺条件,并用元素分析、FT-IR和1H NMR对产物的结构进行了表征.结果表明,当单体浓度≥3.00 mol/L、引发剂浓度为0.015~0.020 mol/L、EDTA浓度为0.40~0.60 mmol/L、聚合反应温度为50~55℃、反应时间为6 h时,产物的特性粘数可达223 mL/g,单体转化率大于98.00%.     

紫外熔石英元件高精度低缺陷控形控性制造技术研究进展

传统的紫外熔石英元件加工方法本身会引入各类制造缺陷,需要后期加工来消除前期加工带来的缺陷,限制了熔石英元件的加工质量和加工效率。针对这些问题,课题组提出了采用磁流变、离子束、保形光顺和流体动压抛光等可控柔体加工技术提升熔石英元件的加工效果,并开展了相关研究。主要介绍了课题组在关键技术上取得的重要进展,包括亚纳米精度表面控形制造技术、纳米精度本征表面控性生成方法、熔石英元件高精度低缺陷组合工艺与设备等一系列关键技术。通过探讨关键技术及其发展现状,为未来紫外熔石英元件高精度低缺陷制造技术的发展提供参考。     

铝镁混合金属氢氧化物溶胶阴离子交换性能研究

本文研究了电解质对铝镁混合金属氢氧化物（Ａｌ－ＭｇＭＭＨ）溶胶粒子中Ｃｌ－和ＯＨ－的阴离子交换性能。在所研究的电解质ＮａＮＯ３，ＨＣＯＯＮａ，ＣＨ３ＣＯＯＮａ，Ｎａ２ＣＯ３，Ｎａ２ＳＯ４和Ｎａ３ＰＯ４中，发现高价阴离子的交换能力大于低价阴离子的交换能力，无机阴离子的交换能力大于有机阴离子的交换能力。所研究Ａｌ－ＭｇＭＭＨ溶胶粒子的阴离子交换容量为２．８２ｍｍｏｌ／ｇ，比粘土粒子的阳离子交换容量大得多。     

Post-polymerization modification of aromatic polyimides via Diels-Alder cycloaddition

We report a facile post-polymerization modification route to functionalized aromatic polyimides via Diels-Alder cycloaddition. Aromatic polyimides are important, versatile high-performance polymers; however, their structural diversity is restricted by the requirements of the step-growth polymerization. We prepared polyimides with alkynes in their main-chain as macromolecular dienophiles and quantitatively grafted tetraphenylcyclopentadienone based dienes. The resulting solution-processable, wholly aromatic polyimides show a considerable increase in surface area due to the induced conformational changes and bulky, rigid, and contorted molecular structures. The orthogonality of the reaction is exploited to insert functional groups, namely bromine and sulfonates, along the polymer backbone. In a further extension, the phenylene segments undergo cyclodehydrogenation to form nanographene segments within the polymer chains. The Diels-Alder cycloaddition onto polyimides is therefore demonstrated to be an effective, widely applicable route to tunable high-performance polymers with value-added functionality and thus considerable potential in a wide range of advanced materials.