Syntheses, Crystal Structures and Fluorescence Properties of Two Triazolyl Derivatives with Biphenyl Links

Two novel triazolyl derivatives with biphenyl links, namely 4,4-bis（1,2,4-triazol-1-ylmethyl）biphenylene 1 and 4,4-bis（3,5-dimethyl-1,2,4-triazol-1-ylmethyl）biphenylene 2, have been synthesized and structurally characterized by single-crystal X-ray diffraction. Compounds 1·H2O·HCl and 2·2H2O·2HCl crystallize in the monoclinic system with space group C2/c and P21/c, respectively. The dihedral angles of the two phenyl rings are 30.26（6）° in 1·H2O·HCl, while co-planar （0.00（7）°） in 2·2H2O·2HCl. In 1·H2O·HCl, the N-H…O hydrogen bonds link 1 to form chain-like structures which are further connected by O-H…Cl, C-H…Cl, C-H…O and π-π supramolecular interactions. The hydrogen bonds of O-H…Cl in 2·2H2O·2HCl provide distinguishing P/M helical chains along the b axis, and these chains are further connected by N-H…O hydrogen bonds to generate a 2D structure. Compounds 1 and 2 in methanol solution show much stronger emission bands at 319 nm than biphenyl at 316 nm under excitation at 260 nm.     

一类[Os^（Ⅱ）（CO）3（tfa）（L）]（L=O^O，O^N，N^N）配合物的结构和光谱特征

采用密度泛函理论以及B3LYP方法和单激发组态相互作用(CIS)方法分别优化了一系列[Os(II)(CO)3(tfa)(L)](tfa为三氟乙酸;L=O^O(1),O^N(2),N^N(3),其中O^O为六氟乙酰丙酮,O^N为羟基喹啉,N^N为3-(三氟甲基)-5-(2-吡啶基)吡唑)配合物的基态和激发态结构.利用含时密度泛函理论(TD-DFT)结合极化连续溶剂化模型(PCM)计算了配合物在CH2Cl2溶液中的吸收和发射光谱.研究结果表明,优化得到的几何结构参数和相应的实验值符合得非常好,激发态几何构型相对基态变化较小,这与实验上观察到的较小的斯托克斯频移现象一致.配合物1-3的最低能吸收分别在342、431和329nm,其磷光发射分别在521、638和488nm.配合物1-3的最高占据分子轨道和最低空轨道主要表现为L配体的π和π*轨道特征,所以它们的最低能吸收归属于π-π*电荷跃迁,并混有少量的金属到配体的电荷跃迁(MLCT)和配体之间电荷跃迁(LLCT)微扰,且其高能吸收也表现为配体内部(IL)和配体间(LL)的电荷跃迁.此外,它们的磷光发射和吸收有相似的跃迁特征.     

新型希夫碱型钳形人工受体的微波合成及其对中性分子的识别性能

以对苯二甲酸为起始原料,设计并合成了8个新型的芳环钳形人工受体(3a～3h),其结构经1H NMR,IR,ESI-MS和元素分析表征。利用UV-Vis滴定法初步考察了3a～3h对中性分子(邻苯二胺,间苯二胺,对苯二胺和二苯甲酮)的识别性能,结果表明3a～3h对其具有良好的识别性能。     

Synthesis, Structure and Luminescent Property of a Zinc(Ⅱ) Coordination Polymer Incorporating Flexible Cyclohexane-1,2,3,4,5,6-hexacarboxylate Ligand

The hydrothermal reaction of Zn(NO3)2·4H2O, cyclohexane-1,2,3,4,5,6-hexacarboxylic acid hydrate (H6LI·H2O, cis-conformation LI: a,e,a,e,a,e) and 2,2'-bpy yielded a new coordination polymer [Zn2(H2LII)(2,2'-bpy)]·2H2O(trans-conformation LII: e,e,e,e,e,e), which was characterized by single-crystal X-ray diffraction, elemental analysis, IR and XRPD(X-ray powder diffraction). This complex crystallized in the triclinic system, with P1 space group and parameters a=0.66922(5) nm, b=0.97291(8) nm, c=1.22184(9) nm, ...     

Syntheses,Structures and Properties of Lanthanide Coordination Polymers Constructed from Mixed Acid

Two new coordination polymers,[Ln(oba)(ox)0.5(H2O)2]n(Ln = Ho(1),Eu(2);H2oba = 4,4?-oxybis(benzoic acid),H2ox = oxalic acid) have been synthesized under hydrothermal conditions.According to single-crystal X-ray diffraction analyses,complex 1 crystallizes in the monoclinic system,space group P21/c with a = 13.783(2),b =10.0120(15),c = 12.1974(18) ,β = 105.217(2)°,V = 1624.2(4) 3,C15H12O9Ho,Mr = 501.18,Z = 4,Dc = 2.050 g/cm3,F(000) = 964,μ = 4.919 mm-1,λ(MoKα) = 0.71073 ?,GOOF = 1.124,the final R = 0.0239 and wR = 0.0570 for 3310 independent reflections with Rint = 0.0298.Complexes 2 and 1 are isostructural.Oba and ox ligands bridge the Ln(III) ions into 2D layers with(4,4) topology,which are further interlinked into a 3D supramolecular network by hydrogen bonds.TG curves of the two complexes are studied to examine their thermal stabilities.Additionally,complex 2 shows red fluorescence in the solid state at room temperature.     

Effect of aromatic substitution on the cure reaction and network properties of anhydride cured triphenyl ether tetraglycidyl epoxy resins

A systemic study of the impact of aromatic substitution on the reaction rate and network properties of the isomers of a tetraglycidylaniline triphenyl ether epoxy resin cured with anhydride hardeners is presented here. The epoxy resins synthesized in this work were based upon N,N,N,N‐tetraglycidyl bis(aminophenoxy)benzene (TGAPB), where the glycidyl aniline and ether groups change from being all meta (133 TGAPB), to meta and para (134 TGAPB), and finally to an all para substituted epoxy resin (144 TGAPB). Increasing para substitution increased reaction rate, promoted the onset of vitrification and increased epoxide conversion. Thermal properties such as glass transition temperatures (T_g) and coefficients of thermal expansion (CTE) both increased consistently with increasing para substitution, although thermal stability as measured via thermogravimetric analysis decreased. Mechanical properties also varied systematically with flexural strength and ductility increasing with increased para substitution, while the modulus decreased. Indeed, the ductility almost doubled, as measured by the work of fracture and displacement at failure highlighting the importance of substitution on properties.     

PC聚合物的再利用研究

聚碳酸酯(PC)是手机外壳常用材料,它是一种综合性能优异的热塑性工程塑料,具有较高的回收价值.采用熔融再生方法分别对同种无涂层手机外壳、浅色混杂带涂层和深色混杂带涂层手机外壳三种PC回收料进行了再生利用,对注塑样品进行了力学性能测试,并对断口进行了分析.研究结果表明,三种PC回收料再生后拉伸强度和弯曲强度值较为接近,其中拉伸强度略低于PC原生料,而弯曲强度高于原生料.无涂层PC回收料延伸率和冲击韧性分别达到了24kJ/m2和65;,而混杂带涂层回收料只有它的一半左右.     

滑带土动力学性质试验研究

为了研究地震高烈度区老滑坡的复活变形原因,本文对滑坡滑带土的动力学特性进行了系列研究。本次试验采用扰动土样,制样基本物理指标按滑带土的现场测试指标确定,在不固结不排水条件下,运用MTS810Teststar程控液压伺服土动三轴仪对单个样品逐级放大动应力的分级试验方法进行。侧向压力 (围压 )分别采用 100kPa、20 0kPa、300kPa三级,通过施加轴向振动荷载 (力 )模拟地震作用,振动波形为正弦波,频率为 1Hz,振幅随试样性质确定。研究结果表明,滑带土在动荷载作用下的动力学性质与其静荷载作用下的力学性质有着较大的差异,主要表现在滑带土的动应力与动应变关系的非线性、滞后性及变形积累特点,动弹性模量与动强度的显著降低以及动阻尼比的显著增大特性。这揭示了动力作用下的滑坡复活原因之一,同时为滑坡稳定性评价和动力作用下的变形机制模拟分析提供了基础资料,也为分析滑带土动力本构模型提供了基本内容。     

GO增强UHMWPE在透明质酸钠润滑介质下的摩擦学性能研究

采用UMT-3MT往复式滑动摩擦磨损试验机,研究在透明质酸钠(SHA)润滑介质下,氧化石墨烯(GO)对基体材料超高分子量聚乙烯(UHMWPE)摩擦学性能的影响.利用高分辨扫描电子显微镜(HR-SEM)和MicroXAM非接触式3D表面轮廓仪观察试样表面磨痕形貌并计算其磨损率.结果表明:在SHA润滑介质下,无机填料GO的添加显著降低UHMWPE基复合材料的磨损率,但是,GO的添加对复合材料稳态摩擦系数和残留在SHA润滑介质中的磨粒特征无明显影响.无机填料GO的添加增强了UHMWPE在SHA润滑介质下的耐磨性能.     

含氮杂环类润滑油添加剂CoMFA-QSTR及CoMSIA-QSTR抗磨损性能模型的构建

依据摩擦学定量构效关系理论(QSTR),采用比较分子力场分析(CoMFA)和比较分子相似性指数分析(CoMSIA)这两种方法研究了含氮杂环类润滑油添加剂的抗磨损性能的摩擦学三维定量构效关系(3D-QSTR),并建立了相应的3D-QSTR模型.结果表明:仅利用静电场构建CoMFA或CoMSIA模型时,模型预测能力最好,r~2,q~2均大于0.5.根据CoMFA或CoMSIA模型等高线图分析得出:分子静电场对含氮杂环类润滑油添加剂的抗磨损性能影响最大,在特定区域的引入带负电荷或带正电荷的基团将有助于抗磨性能的提高.