Test compounds for detecting the silanol effect on the elution of ionized amines in reversed‐phase LC

The effectiveness of several basic compounds for testing silica‐based stationary phases was reviewed by applying them to recent columns for reversed‐phase HPLC. Most octadecylsilylated (C18) stationary phases, prepared as a base‐deactivated material from high‐purity silica gel with endcapping, provided excellent peak shape and column efficiency for the bases including benzylamine and amitriptyline that once caused problems and were subsequently employed for testing silanol activities. However, a cyclic tertiary amine, dextrometorphan, was eluted as an acceptable peak from only a few columns at neutral pH. Such a more sensitive probe is expected to contribute to further improvement of the stationary phase for reversed‐phase HPLC.     

Comparison of HPLC enantioseparation of substituted binaphthyls on CD‐, polysaccharide‐ and synthetic polymer‐based chiral stationary phases

Retention and enantioseparation behavior of ten 2,2′‐disubstituted or 2,3,2′‐trisubstituted 1,1′‐binaphthyls and 8,3′‐disubstituted 1,2′‐binaphthyls, which are used as catalysts in asymmetric synthesis, was investigated on eight chiral stationary phases (CSPs) based on β‐CD, polysaccharides (tris(3,5‐dimethylphenylcarbamate) cellulose or amylose CSPs) and new synthetic polymers (trans‐1,2‐diamino‐cyclohexane, trans‐1,2‐diphenylethylenediamine and trans‐9,10‐dihydro‐9,10‐ethanoanthracene‐(11S,12S)‐11,12‐dicarboxylic acid CSPs). Normal‐, reversed‐phase and polar‐organic separation modes were employed. The effect of the mobile phase composition was examined. The enantiomeric separation of binaphthyl derivatives, which possess quite similar structures, was possible in different enantioselective environments. The substituents and their positions on the binaphthyl skeleton affect their properties and, as a consequence, the separation system suitable for their enantioseparation. In general, the presence of ionizable groups on the binaphthyl skeleton, substitution with non‐identical groups and a chiral axis in the 1,2′ position had the greatest impact on the enantiomeric discrimination. The 8,3′‐disubstituted 1,2′‐binaphthyl derivatives were the most easily separated compounds in several separation systems. From all the chiral stationary phases tested, cellulose‐based columns were shown to be the most convenient for enantioseparation of the studied analytes. However, the polymeric CSPs with their complementary behavior provided good enantioselective environments for some derivatives that could be hardly separated in any other chromatographic system.     

Ionic liquid‐bonded polysiloxane as stationary phase for capillary gas chromatography

Ionic liquid (IL) stationary phase is especially suitable for separation of complex samples, owing to the “dual nature” of IL. In this study, a synthetic method of ionic liquid‐bonded polysiloxane (PSOIL) as stationary phase of GC was proposed. Then, the PSOIL was used to prepare an 8 m capillary column by static method. The column efficiency was measured to be about 4000 plates/m (k=3.55, naphthalene) after the column had been conditioned at 210°C. The durability of PSOIL column was better than that of the mixed stationary phase of IL and OV‐1. Moreover, the Abraham solvation parameter model was employed to characterize the PSOIL. The result revealed that the PSOIL had stronger dispersion force (l) than neat IL and stronger hydrogen bond basicity (a) than DB‐1. That meant the PSOIL might offer good selectivity for both polar and non‐polar analytes. The column exhibited unique selectivity for various organic substances, such as the homologous compounds of alkanes, esters, alcohols and aromatic compounds. It was also found that some aromatic positional isomers could be separated better on the PSOIL column than on the DB‐1 column. Furthermore, the stationary phase was suitable for separation of high‐boiling point compounds such as polycyclic aromatic hydrocarbons, phthalic esters, etc. All of these demonstrated that the PSOIL offered good selectivity and high separation efficiency for a wide range of analytes.     

Determination of eight fatty acid ethyl esters in meconium samples by headspace solid‐phase microextraction and gas chromatography–mass spectrometry

A number of fatty acid ethyl esters (FAEEs) have recently been detected in meconium samples. Several of these FAEEs have been evaluated as possible biomarkers for in utero ethanol exposure. In the present study, a method was optimized and validated for the simultaneous determination of eight FAEEs (ethyl laurate, ethyl myristate, ethyl palmitate, ethyl palmitoleate, ethyl stearate, ethyl oleate, ethyl linoleate and ethyl arachidonate) in meconium samples. FAEEs were extracted by headspace solid‐phase microextraction. Analyte detection and quantification were carried out using GC‐MS operated in chemical ionization mode. The corresponding D5‐ethyl esters were synthesized and used as internal standards. The LOQ and LOD for each analyte were <150 and <100 ng/g, respectively. The method showed good linearity (r²>0.98) in the concentration range studied (LOQ – 2000 ng/g). The intra‐ and interday imprecision, given by the RSD of the method, was lower than 15% for all FAEEs studied. The validated method was applied to 63 authentic specimens. FAEEs could be detected in alcohol‐exposed newborns (>600 ng/g cumulative concentration). Interestingly, FAEEs could also be detected in some non‐exposed newborns, although the concentrations were much lower than those measured in exposed cases.     

Determination of partition coefficient and analysis of nitrophenols by three‐phase liquid‐phase microextraction coupled with capillary electrophoresis

A three‐phase hollow fiber liquid‐phase microextraction method coupled with CE was developed and used for the determination of partition coefficients and analysis of selected nitrophenols in water samples. The selected nitrophenols were extracted from 14 mL of aqueous solution (donor solution) with the pH adjusted to pH 3 into an organic phase (1‐octanol) immobilized in the pores of the hollow fiber and finally backextracted into 40.0 μL of the acceptor phase (NaOH) at pH 12.0 located inside the lumen of the hollow fiber. The extractions were carried out under the following optimum conditions: donor solution, 0.05 M H₃PO₄, pH 3.0; organic solvent, 1‐octanol; acceptor solution, 40 μL of 0.1 M NaOH, pH 12.0; agitation rate, 1050 rpm; extraction time, 15 min. Under optimized conditions, the calibration curves for the analytes were linear in the range of 0.05–0.30 mg/L with r²>0.9900 and LODs were in the range of 0.01–0.04 mg/L with RSDs of 1.25–2.32%. Excellent enrichment factors of up to 398‐folds were obtained. It was found that the partition coefficient (K_a/d) values were high for 2‐nitrophenol, 3‐nitrophenol, 4‐nitrophenol, 2,4‐dinitrophenol and 2,6‐dinitrophenol and that the individual partition coefficients (K_org/d and K_a/org) promoted efficient simultaneous extraction from the donor through the organic phase and further into the acceptor phase. The developed method was successfully applied for the analysis of water samples.     

Indirect detection of the 183W and 57Fe nuclei using 119Sn‐relayed 1H,X correlation spectroscopy

Recently reported triple‐resonance Y‐relayed ¹H,X correlation experiments have been utilized to characterize ¹⁸³W and ⁵⁷Fe chemical shifts using ¹¹⁹Sn as the Y‐relaying nucleus instead of the previously used ³¹P. Application of an adaptation of Gudat's original INEPT/HMQC sequence results in a significant enhancement of the signal‐to‐noise (S/N) ratio for two‐dimensional ¹¹⁹Sn‐relayed ¹H,¹⁸³W and ¹H, ⁵⁷Fe correlation spectra with efficient detection of the transition metal nucleus in tungsten and iron complexes lacking an observable direct scalar coupling between the transition metal and any hydrogen nuclei. Strengths and shortcomings of the novel sequence and the original sequences reported by Gudat are discussed in the context of ¹¹⁹Sn‐relayed proton detection of very low frequency transition metal nuclei. Copyright © 2010 John Wiley & Sons, Ltd.     

Hierarchical structure in polymer‐based drug delivery systems as probed by calorimetric measurements

Thermoporosimetry (TPM), a differential scanning calorimetry technique that relies on the shift of transition temperatures caused by the confinement of liquids, was applied to elucidate the complex morphology of drug‐loaded polymeric microcapsules prepared by the emulsion solvent evaporation method. For the very first time, TPM has been applied simultaneously with two liquids as structural probes. It was found that Miglyol, which dissolves the selected drug (Ibuprofen), is confined inside vesicles having a mean radius of 26.3 nm, whereas water, which is the continuous phase, is trapped inside a swollen polymeric network of Eudragit with an average mesh radius of 1.7 nm. A proposed hierarchical structure is given, which predicts that Eudragit microcapsules are formed from a collection of inert oil vesicles partitioned by polymeric Eudragit membranes swollen by water. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1939–1945, 2010     

Micro ATR‐FTIR study of the hydration state of poly(N‐tert‐butylacrylamide‐co‐acrylamide) copolymers during phase transition in aqueous media and in the mixture of water–methanol

Coil‐globule transition of poly(N‐tert‐butylacrylamide‐co‐acrylamide) P(NTBAM‐co‐AM) copolymers is investigated in the aqueous solution and in the mixture of water–methanol by micro ATR‐FTIR spectroscopy technique. In this study the microstructure and its changes in the hydration states of the distinct groups of these copolymers are investigated by micro ATR/FTIR technique. The results showed that by heating the solution above the LCST hydrogen bonding between C?O and water was decreased but the hydrogen bonding between polymeric chains increased, which prove the aggregation of polymer chain during phase separation. The chemical shifts of IR bands are also studied in the mixture of water–methanol. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 356–363, 2010