提高YBCO块材在外磁场中悬浮力

本给出了三种提高YBCO块材在外磁场中悬浮力的方法．第一种方法是增强外磁场，对于此方法，本研究了一块直径为30mm的圆柱状YBCO块材分别在圆柱状NdFeB永磁体和NdFeB永磁导轨上的悬浮力．测量结果表明在77K温度下YBCO块在圆柱状NdFeB永磁体上的最大悬浮力为50N，在NdFeB永磁导轨上的最大悬浮力为103．ON．第二种方法是提高YBCO块材自身的性能，包括临界电流密度、俘获磁通和块材尺寸，对于此方法，本仅研究了块材尺寸对悬浮力的影响．三块直径分别为30mm、35mm、40mm的圆柱状YBC0块材在NdFeB永磁导轨上的悬浮力被测量，77K温度下5mm悬浮间距时的悬浮力分别为103．ON、134．5N、175．ON．第三方法是将YBCO块材变成准永久磁体，此种情况下，直径为40mm的圆柱状YBCO块材在77K温度下5mm悬浮间距时的悬浮力高达218．3N．     

13N的一个可能的类晕的质子2p态

假设¹³N是单粒子的2p态的结构,用Glauber多重散射理论计算了1GeV的质子在¹³N上弹性散射的微分截面,研究了¹³N的类晕结构.与¹³C的情况不同,虽然目前还没有关于p-¹³N弹性散射微分截面的实验材料与我们的理论结果相比较,但是这个理论结果可以作为对未来的实验测量工作的一个指导,特别是对兰州近代物理研究所的晕核实验研究工作有参考和指导价值.参照先前我们对¹³C晕核结构的理论预言和进而的实验证实,本文的计算结果清楚地表明:¹³N可能存在着一个类晕的质子皮结构.因此,实验上测量p-¹³N弹性散射的微分截面就是当前需要马上进行的一个实验研究工作.     

CsBr高压X光研究

 采用同步辐射X光源和能散法，对CsBr粉末样品进行高压原位X光衍射实验。由金刚石对顶压砧高压装置（DAC）产生高压，用已知状态方程的Pt粉末作内标，由Pt的衍射数据确定样品压力，最高压力达64.4 GPa。实验结果表明：室温常压下原始CsBr样品是具有简单立方结构的晶体，其晶格常数α＝0.428 5 nm。高压下CsBr的结构有所变化，在51.3~58.4 GPa的压力范围内，(110)线和(211)线发生劈裂，从而形成了四方相。     

皮秒扫描相机在半导体激光管输出特性研究中的应用

本工作用Picotron 200型扫描相机和液态氮冷却的CCD摄相机系统对半导体激光二极管LTO22 MC的输出特性进行了测量,其最短输出脉冲宽度为2.1ps。这种半导体激光二极管的发射波长为780nm,连续工作条件下,其输出功率为3mW到5mW。     

Search for a precursor crystal-to-crystal phase transition to amorphization in α-GeO2 and α-AlPO4 under pressure

Recent X-ray diffraction studies on α-quartz (SiO₂) by Kingmaet al [1], have shown the occurrence of a reversible, crystalline-to-crystalline, phase transition just prior to amorphization at ≈ 21 GPa. This precursor transition has also been confirmed by our recent molecular dynamics simulation study [2]. In order to investigate the possibility of a similar behaviour in other isostructural compounds, which also undergo pressure induced amorphization, α-GeO₂ and α-AlPO₄ (berlinite form) were studied using energy dispersive X-ray diffraction. In either of these materials, no such phase transition is detected prior to amorphization. The onset of amorphization and its reversal is found to be time dependent in GeO₂.     

Pd (II)‐catalyzed vinyl addition polymerization of novel functionalized norbornene bearing dimethyl carboxylate groups

Three novel functionalized polynorbornenes (PNB) with pendant dimethyl carboxylate group (carboxylates—acetate, propionate, and butyrate) are synthesized as a vinyl‐type with a palladium (II) catalyst in high yield. The effects of size of substitutents, molar ratio of monomer to catalyst, solvent polarity, reaction time, and temperature on the polymerization of exo‐norbornene dimethyl propionate were systematically investigated. The low molar ratio and temperature, as well as high polarity of solvent, and long reaction time, are favorable for the enhancement of the monomer conversion, especially, the solvent have an obvious effect on the catalyst activity. The resulting poly(cis‐norbornene‐exo‐2,3‐dimethyl carboxylates) (PNB‐dimethyl carboxylates) show good solubility in common organic solvent and high thermal stability up to 360 °C. The glass transition temperature was detected by DMA at 331, 324, and 318 °C for acetate, propionate, and butyrate, respectively. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3391–3399, 2007     

Synthesis of poly(p‐phenylene sulfide) from bis(4‐bromophenyl) disulfide

Improved reaction conditions for the preparation of poly(p‐phenylene sulfide) (PPS) directly from bis(4‐bromophenyl) disulfide (BBD) have been established. Heating BBD with magnesium metal afforded only a low molecular weight polymer. PPS with a melting temperature around 280 °C was obtained from BBD in the presence of sodium carbonate or zinc metal. The best results were obtained with the addition of a catalytic amount of KI to the zinc–BBD mixture. Polymers prepared by the above methods are semicrystalline and dissolve in 1‐chloronaphthalene and have properties comparable to commercial PPS. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 900–904, 2006     

Lithographic design of photosensitive polyarylates based on reaction development patterning

The factors affecting pattern‐forming properties in reaction development patterning were examined with polyarylates with various bisphenol moieties. The developability of the photosensitive polyarylates was dependent on the properties of the subtituent (R) in the bisphenol moieties. The development time decreased in the following order: R?C(CH₃)₂ > fluorenyl unit ? phenolphthalein unit > C(CF₃)₂ > SO₂. This order agreed with that of the reactivity between the polyarylates and ethanolamine, and these orders can be explained by pK_a of the bisphenol used to prepare the polyarylates. The development with NH₂? R′? OH resulted in successful positive‐tone pattern formation. However, pattern formation with the developers containing NH₂? R′? OCH₃ was unsuccessful. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2694–2706, 2006     

电子碰撞诱导原子从低激态向高激态弛豫

本文根据空心阴极放电中电子能量分布的物理图象,分析了原子从低激态向高激态弛豫的可能途径。建立高低激态集居数密度增量的关系。讨论高激态集居数密度增量获得可观量的条件。根据此条件分别选取钠原子的基态3s~2S_(1/2)和铜原子的亚稳态4s~2D_(3/2)为与激光共振的下能级,并激发具有较大自发发射几率的3s~2S_(1/2)→3p~2P°_(1/2)(和3p~2P°_(3/2))和4s~2D_(3/2)→4p~2P°_(1/2)跃迁,在远离上能级的高激态上观测到敏化荧光,并精确测得这些态的自发发射系数比值,而在更高激态上没有观测到敏化荧光,表明讨论中提出的条件是合理的。     

神光装置放大自发辐射输出特性测量

讨论了大型激光装置放大自发辐射输出的一般特性，给出了神光装置放大自发辐射特性的测量结果。