Epitaxial growth of Ge1-xSnx films with x up to 0.14 grown on Ge （001） at low temperature

We characterize the structures of Ge1-xSnx films with x up to 0.14 grown on Ge （001） by molecular-beam epitaxy at low temperature. The results show that Ge1-xSnx films are fully strained even at high Sn composition. The in-plane lattice parameters remain exactly the same as that of the substrate. Depth sensitivity analysis of the lattice parameters indicates that the strains of the epitaxial films are all in homogeneity. The films are fully strained. Poisson ratios, the force constants for the bonds between Ge and Sn are estimated and discussed in the present paper. Raman results show Ge-Ge, Ge-Sn, Sn-Sn vibrational modes. The Sn-Sn bond aggregation may respond to the high quality of our films. The fully strained epitaxy films with high content of Sn may be useful in designing the high quality GeSn films.     

微型同轴脉管制冷机最低制冷温度影响因素的实验研究

本文对微型同轴脉管制冷机最低制冷温度的影响因素进行了实验研究。试验结果表明:在其他运行参数不变的情况下,随着氢浓度的逐渐减少,最低制冷温度也逐渐降低,当氢的摩尔浓度小于20％时,其最低制冷温度和纯氦相差不大。不同的氢氦配比下,该脉管制冷机的最佳运转频率为16.7 Hz。随着系统平均压力的提高,最低制冷温度也随之下降,但变化幅度越来越小。     

Improved DOSY NMR data processing by data enhancement and combination of multivariate curve resolution with non-linear least square fitting

The quality of DOSY NMR data can be improved by careful pre-processing techniques. Baseline drift, peak shift, and phase shift commonly exist in real-world DOSY NMR data. These phenomena seriously hinder the data analysis and should be removed as much as possible. In this paper, a series of preprocessing operations are proposed so that the subsequent multivariate curve resolution can yield optimal results. First, the baseline is corrected according to a method by Golotvin and Williams. Next, frequency and phase shift are removed by a new combination of reference deconvolution (FIDDLE), and a method presented by Witjes et al. that can correct several spectra simultaneously. The corrected data are analysed by the combination of multivariate curve resolution with non-linear least square regression (MCR-NLR). The MCR-NLR method turns out to be more robust and leads to better resolution of the pure components than classic MCR.     

Analyzing ultrafast multiplex coherent anti‐Stokes Raman spectra with picosecond probing

This article reports an efficient method to simulate time and frequency resolved coherent anti‐Stokes Raman scattering spectra measured with picosecond pump and probe fields and ultrashort Stokes pulses. A systematic comparison of measured and simulated time and frequency dependent data is presented for carbon tetrachloride, chloroform, cyclohexane, octane, and poly(methyl methacrylate). While the first compound exhibits no Raman active modes in the considered spectral region of the CH‐stretch vibrations, the other ones show Raman spectra of increasing complexity. Vibrational frequencies and homogeneous dephasing rates are extracted by fitting explicit analytical formulas to the recorded data. Interference between nonresonant and resonant contributions to the nonlinear polarization is taken fully into account. The ability to measure the influence of inhomogeneous broadening is discussed. Copyright © 2014 John Wiley & Sons, Ltd.     

Study on rectangular ultrasonic radiator of flexural resonant vibration in high modes

Based on the theory of coupling vibration and flexural vibration of thin rod of rectangular cross section, the fiexural vibration of rectangular thin plate was studied. The frequency equation was derived under the condition of freeboundaries. The normal modes and the relation between the normal modes and the resonant frequency were obtained. Experiments showed that the calculated resonant frequencies agree well with the measured results, and the rectangular thin plate in flexural vibration has abundant resonant frequencies. The radiator of flexural vibration used in ultrasonic cleaning and other techniques has the advantages of large acoustic radiating area, uniform acoustic field and easy adjustment of resonant frequencies, proving that it is a promising ultrasonic source.     

闪光X射线高速摄影荧光转换屏的设计和性质研究

本文描述了用于中间弹道高速摄影荧光转换屏的设计特点、性能测试和实验结果。文中讨论了Gd2O2S:Tb和(Zn,Cd)S对X射线的吸收系数、发光效率以及荧光光谱与变象管S-20阴极光谱灵敏度曲线相匹配的相关曲线;测试了转换屏的相对发光强度、分辨率及其余辉。实验证明本屏发光亮度比钨酸钙屏高60倍左右,屏分辩率达51p/mm,余辉时间为8μs,多幅摄影结果证明第一幅的图象对第二幅照片无“拖尾”现象,本屏已达到了中间弹道高速摄影转换屏的实用水平。     

无光滤波六倍频微波信号产生的系统设计

基于两个级联偏振调制器,提出了一种高频谱纯度、稳定的六倍频微波信号产生方法。该方法通过适当调整偏振片的偏振方向、射频驱动信号电压和相位,实现无光滤波器条件下、任何波段六倍频微波信号的产生。利用Optisystem平台搭建的仿真系统,以S波段4 GHz信号为例,验证了该设计系统产生的六倍频信号质量,并分析了非理想射频驱动电压和相位对六倍频信号质量的影响,结果表明：该设计系统能产生最大光边带抑制比、射频无杂散抑制比分别为21.3,15.2 dB的六倍频微波信号;且非理想驱动电压和相位差的偏离应控制在理想值5%的范围之内。     

BEPCII新加速管的高功率测试和老练

BEPCⅡ(北京正负电子对撞机重大改进工程)要求其直线注入器提供更高的能量和流强,为此必须改进正电子产生靶前后的加速管,以提高加速梯度,并消除原有加速管因长期运行后性能有所下降的隐患.本文叙述了新加速管的高功率测试,包括测试装置的设计、建立,微波功率源(速调管)的调试和加速管高功率测试结果及其分析.     

TiO2纳米晶的等离子体改性及光电转换性能的研究

用反应射频溅射法和涂敷法在导电玻璃上制备TiO2薄膜，并用Ar射频等离子体对TiO2薄膜进行处理。按“三明治”结构将TiO2工作电极、Pt／C对电极、0．5MKI 0．05M I2电解液组装成光电池，测量其开路电压和短路电流。结果表明经过Ar射频等离子处理后，溅射法和涂敷法制备的TiO2薄膜组装的光电池的光电流分别提高了约80％和60％。     

超导电力技术新进展及其未来发展的思考

近年来高温超导材料研究取得很大进展,它在电力领域的应用研究已受到广泛关注,一些示范样机,诸如高温超导输电电缆、变压器、故障电流限制器、电机和储能装置已经研制成功并投入示范性试验.超导技术是21世纪具有战略经济意义的高新技术,文章将介绍高温超导电力应用研究的新进展及其未来发展的思考。