Helical Toroids Self-Assembled from a Binary System of Polypeptide Homopolymer and its Block Copolymer

Toroids and helices are fundamental geometrical structures in nature. Polymers can self-assemble into various nanostructures, including both toroids and helices; however, nanostructures combining toroidal and helical morphologies (that is, helical toroids) are rarely observed. A binary system is reported containing polypeptide homopolymer and its block copolymer, which can hierarchically self-assemble into uniform helical nanotoroids in solution. The formation of the helical toroids is a successive two-step process. First, the homopolymers aggregate into fibrils and convolve into toroids, thereby resembling the toroidal condensation of deoxyribonucleic acid (DNA) chains. Second, the block copolymers self-assemble on the homopolymer toroids and result in helical surface patterns. Additionally, the chirality of the surface helical patterns can be varied by the chirality of the polypeptide block copolymers.     

分级孔结构g-C3N4光催化剂的制备及性能

以单分散SiO2为模板,通过简单的一步煅烧法制备具有分级孔结构的g-C3N4。与体相g-C3N4相比,分级孔结构的g-C3N4不仅可见光吸收性能和比表面积得到提高,而且更有利于光生电子-空穴的分离。此外,具有分级孔结构的g-C3N4具有明显增强的可见光驱动的光催化产氢活性,当SiO2和二氰二胺质量比为1∶1时,制备所得g-C3N4(C3N4-2)产氢速率几乎是体相g-C3N4的18倍。     

Probing Substrate/Catalyst Effects Using QSPR Analysis on Friedel-Crafts Acylation Reactions over Hierarchical BEA Zeolites

Attempts to optimize heterogeneous catalysis often lack quantitative comparative analysis. The use of kinetic modelling leads to rate (k) and relative sorption equilibrium constants (K), which can be further rationalized using Quantitative Structure-Property Relationships (QSPR) based on Multiple Linear Regressions (MLR). Friedel-Crafts acylation using commercial and hierarchical BEA zeolites as heterogeneous catalysts, acetic anhydride as the acylating agent, and a set of seven substrates with different sizes and chemical functionalities were herein studied. Catalytic results were correlated with the physicochemical properties of substrates and catalysts. From this analysis, a robust set of equations was obtained allowing inferences about the dominant factors governing the processes. Not entirely surprising, the rate and sorption equilibrium constants were found to be explained in part by common factors but of opposite signs: higher and stronger adsorption forces increase reaction rates, but they also make the zeolite active sites less accessible to new reactant molecules. The most relevant parameters are related to the substrates’ molecular size, which can be associated with different reaction steps, namely accessibility to micropores, diffusion capacity, and polarizability of molecules. The relatively large set of substrates used here reinforces previous findings and brings further insights into the factors that hamper/speed up Friedel-Crafts reactions in heterogeneous media.     

Nanoarchitectonics beyond Self‐Assembly: Challenges to Create Bio‐Like Hierarchic Organization

Incorporation of non‐equilibrium actions in the sequence of self‐assembly processes would be an effective means to establish bio‐like high functionality hierarchical assemblies. As a novel methodology beyond self‐assembly, nanoarchitectonics, which has as its aim the fabrication of functional materials systems from nanoscopic units through the methodological fusion of nanotechnology with other scientific disciplines including organic synthesis, supramolecular chemistry, microfabrication, and bio‐process, has been applied to this strategy. The application of non‐equilibrium factors to conventional self‐assembly processes is discussed on the basis of examples of directed assembly, Langmuir–Blodgett assembly, and layer‐by‐layer assembly. In particular, examples of the fabrication of hierarchical functional structures using bio‐active components such as proteins or by the combination of bio‐components and two‐dimensional nanomaterials, are described. Methodologies described in this review article highlight possible approaches using the nanoarchitectonics concept beyond self‐assembly for creation of bio‐like higher functionalities and hierarchical structural organization.     

Synthesis of a Hierarchically Porous C/Co3O4 Nanostructure with Boron Doping for Oxygen Evolution Reaction

Fabricating a low‐cost and highly efficient electrocatalyst is of importance for the development of renewable energy devices. In this work, we have synthesized an ultrafine cobalt oxide nanocatalyst (5–10 nm) doped with boron (BC/Co₃O₄) by using a metal–organic framework as a precursor, which exhibits an excellent catalytic activity for oxygen evolution reaction (OER). Owing to the improvement of accessible active sites by boron doping, the synthesized catalyst can reach a current density of 10 mA cm^?2 at 1.54 V with a low overpotential of 310 mV, superior than those of commercial RuO₂ and N‐doped C/Co₃O₄. This work provides a facile way to develop highly efficient catalysts for electrochemical reactions.     

EFFECTIVE ELASTIC MODULUS OF BONE-LIKE HIERARCHICAL MATERIALS

A shear-lag model is used to study the mechanical properties of bone-like hierarchical materials.The relationship between the overall effective modulus and the number of hierarchy level is obtained.The result is compared with that based on the tension-shear chain model and finite element simulation,respectively.It is shown that all three models can be used to describe the mechanical behavior of the hierarchical material when the number of hierarchy levels is small.By increasing the number of hierarchy level,the shear-lag result is consistent with the finite element result.However the tension-shear chain model leads to an opposite trend.The transition point position depends on the fraction of hard phase,aspect ratio and modulus ratio of hard phase to soft phase.Further discussion is performed on the flaw tolerance size and strength of hierarchical materials based on the shear-lag analysis.     

HL-2M初始等离子体放电阶段的辉光放电清洗系统电极的设计与分析

针对HL-2M装置初始等离子体放电阶段所需的直流辉光放电清洗系统的电极进行了设计.对辉光放电清洗系统在不同工况下的系统负载进行了分析和拟定,并确定了电极结构设计分析标准.根据系统电极的结构特点并结合系统负载规范与分析标准,依据不同的失效模式对电极进行了失效分析.分析结果表明,此针对初始等离子体放电的电极设计能可靠安全运...     

钼酸根阴离子在增强聚苯胺包覆的镍钴层状氢氧化物的电容和析氧行为中的关键作用

理论容量大且过电位低的层状氢氧化物(LDHs)是极有前景的超级电容电池和析氧反应的电极材料;然而,体相LDHs的低电导率和活性位点不足增加了电极的内阻,降低了电极容量和产氧效率.本文采用两步法制备了聚苯胺包覆的MoO42?插层的镍钴层状双金属氢氧化物复合电极(M-LDH@PANI).随着LDH中MoO42?含量的增加,针状的LDH微球逐渐演化为具有较高比表面积的片状M-LDH微球,这为整个电极提供了更多的电化学位点.此外,非晶态的聚苯胺包覆提高了复合电极的电导率.在引入适量MoO42?插层离子时,M-LDH@PANI表现出显著强化的储能和催化性能.所获得的M-LDH@PANI-0.5在析氧反应中表现出优越的电催化活性(10 mA cm?2时的过电位为266 mV),作为超级电容电池电极则具有864.8 C g?1的高容量.采用M-LDH@PANI-0.5作为正极及以活性炭作为负极组装的超级电容电池在功率密度为8,300.0 W kg?1时能量密度为44.6 Wh kg?1,且具有优异的循环稳定性(10000次循环后保留83.9％的初始容量).本文为LDH基材料的阴离子插层改性增强材料性能的机理提供了一个非传统的解释.在上述研究基础上,采用射线衍射(XRD)、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)、高分辨透射电镜(HRTEM)和比表面积测试(BET)等手段对样品进行了深入表征.XRD结果表明,MoO42?插层的LDH材料的层间晶面(003)的峰随着MoO42?含量的增加而逐渐消失,这是由于晶面间距越大越容易受到晶粒细化的影响,间距大的晶格更容易受到破坏,导致晶格的展宽和弱化,从而间接证明MoO42?的成功插层.SEM、HRTEM和BET测试结果表明,MoO42?的含量对材料的形貌和比表面积具有重大影响.利用XPS对样品的价态进行了研究,发现随着MoO42?含量的增加,Co和Ni的价态没有明显变化.电化学测试结果表明,电极的储能和催化性能随MoO42?含量的增加而先增加后减小.利用理论计算分析了MoO42?在LDH中的插层行为,发现少量的MoO42?有利于扩大LDH的层间间距,而过量的MoO42?则会与LDH的H原子结合,从而与电解液中的OH?竞争,导致复合电极的电化学性能下降.此外,MoO42?插层的片状微球能有效调节材料的去质子化能,大大加速电极表面的氧化还原反应.因此,MoO42?插层能够显著强化LDH基材料的超级电容电池电极和OER催化剂电化学性能.     

木糖-软模板水热法制备硼掺杂分级多孔炭球及其电化学性能

以D-木糖为炭源,月桂酸钠为模板剂,硼酸为掺杂剂,通过水热炭化方法制得硼掺杂分级多孔炭球（BPC_S）。通过扫描电子显微镜（SEM）、透射电子显微镜（TEM）、N₂吸附-脱附测试、X射线光电子能谱（XPS）、顺磁共振波谱（EPR）、傅里叶红外光谱（FT-IR）、拉曼光谱（Raman）、X射线粉末衍射（XRD）、热重（TG）分析对样品进行表征。结果表明：月桂酸钠作为介孔造孔剂的同时,通过与D-木糖间的氢键作用使有机-有机自组装过程自发进行并形成窄尺寸分布（2~5 μm）规整炭球;硼酸在水热中催化炭源脱水降解,并以BC₃、BCO₂和BC₂O的形式掺杂在炭球上,掺硼后炭球与水表面接触角降低,润湿性提高。经CO₂活化、月桂酸钠高温分解以及胶质炭球的堆积分别产生微孔（0.5~1.2 nm）、介孔（3.14~35.00 nm）和大孔（60~146 nm）并形成分级结构。当硼酸加入量为0.927 5 g时多孔炭球（BPC_S-1）的电化学性能最佳,在6 mol·L^-1 KOH三电极体系中电流密度为0.5 A·g^-1时,比电容达287.12 F·g^-1;两电极体系中电流密度为0.5 A·g^-1时比电容达151.34 F·g^-1,能量密度达5.3 Wh·kg^-1;电流密度为5 A·g^-1时进行1 000次充放电循环,电容保持率仍达96.43%。     

多孔柿饼状BiOBr光催化剂的简易溶剂热法合成（英文）

以硝酸铋和十六烷基三甲基溴化铵(CTAB)为Bi和Br源,采用聚乙烯吡咯烷酮(PVP)辅助溶剂热法首次成功制备了多孔纳米片聚结的柿饼状溴氧化铋(BiOBr)。通过多种分析技术对分级微米结构BiOBr材料的物化性质进行了表征,并对其在可见光照射下降解亚甲基蓝(MB)的光催化活性进行了评价。结果表明,溶剂热时间和PVP的加入量对产物的颗粒形貌和结晶度有显著影响。当加入0.7 g PVP时,120℃溶剂热处理12 h,可得到多孔纳米片聚结的柿饼状BiOBr样品。多孔柿饼状BiOBr样品的比表面积为4 m2·g^-1,带隙能为2.64 eV,在可见光区具有较强的光吸收性能,具有良好的可见光驱动降解MB的光催化活性和稳定性。我们推断,多孔纳米片聚结的柿饼状BiOBr样品具有优良的可见光催化性能,这与该样品的较高比表面积、多孔结构、低带隙能以及独特的颗粒形貌有关。