4-乙烯基吡啶-镍(钴)及丙烯酰胺-镍(钴)的制备、结构、聚合及聚合物的催化性能

制备了4-乙烯基吡啶-镍(钴)和丙烯酰胺-镍(钴)络合物并研究了它们的结构。在自由基引发剂的作用下,4-乙烯基吡啶-镍可进行溶液聚合,也可与苯乙烯共聚合,测定了单体的竞聚率。所得的聚(4-乙烯基吡啶-镍)及聚(4-乙烯基吡啶-钴)以NaBH_4还原后可作为一些有机化合物的加氢催化剂。由IR及XPS分析说明在丙烯酰胺-镍络合物中,与镍离子发生了络合作用的是羧基上的氧原子。     

Closer asymptotic approximations for the distributions of the power divergence goodness-of-fit statistics

Summary The members of the power divergence family of statistics all have an asymptotically equivalent χ² distribution (Cressie and Read [1]). An asymptotic expansion for the distribution function is derived which shows that the speed of convergence to this asymptotic limit is dependent on λ. Known results for Pearson'sX ² statistic and the log-likelihood ratio statistic then appear as special cases in a continuum rather than as separate (unrelated) expansions.     

The Use of Adiabatic Calorimetry for the Process Analysis and Safety Evaluation in Free Radical Polymerization

Adiabatic calorimetry is a technique that has been introduced as an important approach to hazard evaluation of exothermically reactive systems. In this paper the free radical polymerization of methyl methacrylate (MMA) has been studied. One of the most important aspects of MMA polymerization is its exothermicity and autoaccelerating behaviour, these characteristics can generate the occurrence of a runaway reaction.In a runaway situation the reacting system is close to adiabatic behaviour because it is unable to eliminate the heat that is being generated. An even worse situation can be reproduced in the laboratory with the Phi-Tec pseudo-adiabatic calorimeter. Process design parameters that are usually calculated from thermodynamic data or using semiempirical rules, such as adiabatic temperature rise or maximum attainable pressure, can be directly determined.The existence of the ceiling temperature has been experimentally demonstrated.This revised version was published online in November 2005 with corrections to the Cover Date.     

Determination of the uronic acid composition of seaweed dietary fibre by HPLC

A high-performance liquid chromatographic (HPLC) method is described for determination of the ratio of beta-d-mannuronic acid to alpha-l-guluronic acid (M/G ratio) in dietary fibre of edible seaweeds. Total dietary fibre (TDF) content was determined gravimetrically. The TDF fraction was hydrolysed with 12 m and 1 m H(2)SO(4), then neutralized with AG 4 x 4 resin. The uronic acids were separated in a Tracer Extrasil SAX 5 micro m column (25 cm x 4 mm) at 35 degrees C, with 2 mm KH(2)PO(4) containing 5% methanol as mobile phase at a fl ow rate of 1.5 mL/min. The detection wavelength was UV 210 nm. The chromatographic identifications of beta-d-mannuronic acid and alpha-l-guluronic acid were confirmed by liquid chromatography-mass spectrometry (LC-MS). The method precision was 1.4% for beta-d-mannuronic acid and 3.5% for alpha-l-guluronic acid. The method was used to determine M/G ratio in canned seaweeds (Saccorhiza polyschides and Himanthalia elongata) and in dried seaweeds (H. elongata, Laminaria ochroleuca, Undaria pinnatifida, Palmaria sp. and Porphyra sp.).     

Synthesis and characterization of maleimide polymers with pendant pyrazole groups. IV. Copolymerization of pyrazole-modified maleimides with vinyl ethers

The synthesis of maleimides that have pyrazolic or bipyrazolic pendant groups is described. Their homopolymerization and their copolymerization with 2-chloroethyl vinyl ether (CEVE) is reported. The homopolymerizations of such maleimides were performed under various conditions and led to low molecular-weight polymers. However, alternating copolymers were obtained from CEVE as comonomers whatever the monomers feed compositions. A similar behavior was also observed for maleimides that do not exhibit any spacer, whereas for bulky vinyl ethers, random copolymers were produced. A comparison of the thermal behavior between these copolymers (glass transition temperatures, T_g, and decomposition temperatures) and other copolymers having different spacers between the nitrogenated cycles and the chain are related. Thus, an important decrease of T_g, was observed when C₃H₆CO₂CH₂ groups were used as the spacer instead of methylene groups. Moreover, the thermal weakness of these copolymers may come from the substituents of the vinyl ether and is discussed. © 1994 John Wiley & Sons, Inc.     

不同嵌段比的PEG-b-PDMAEMA共聚物在水溶液中的自聚集行为

采用氢核磁共振(¹H-NMR)、动态光散射(DLS)及透射电子显微镜(TEM)对聚乙二醇-嵌段-聚甲基丙烯酸N,N-二甲氨基乙酯(PEG-b-PDMAEMA)三种具有不同PEG/PDMAEMA嵌段比的PEG-b-PDMAEMA共聚物在水溶液中的自聚集行为进行了研究. 研究表明, 两嵌段比例是影响聚合物胶束化过程的关键因素: 只有当其中聚乙二醇含量较低(质量分数低于33%)时, 聚合物才具有其pH/温度敏感胶束化特性. 此外, 共聚物溶液随温度胶束化过程与共聚物嵌段比大小密切相关. PEG-b-PDMAEMA这种不同于传统双亲性嵌段共聚物(DHBCs)在选择性溶剂中独特的胶束化行为, 是由聚合物溶液体系中各种基团之间的氢键作用决定的.     

交联1,4—顺式聚丁二烯的取向结晶

用ＷＡＸＤ和ＳＡＸＳ研究交联１，４－顺式聚丁二烯的取向结晶。结果表明：该试样在拉伸状态时，形成折叠链片晶，而不是伸直链纤维晶。片晶之间断产生新的片晶，使长周期减小，并且片晶的横向尺寸不断增大，由此导致结晶度增大。     

Sr／Ca比变化对红色荧光粉Ca1-xSrxS：Eu^2＋的影响

在CO气氛下采用固相反应法合成了发红光的Ca1-xSrxS:Eu^2 荧光粉，研究了基质阳离子Sr／Ca比变化对其晶体性质及发光性能的影响。结果表明，随着Sr／Ca比的减少，荧光粉的晶胞参数逐渐降低；同时，由于受电子云膨胀效应和晶体场影响，发射主峰向长波方向移动，红色比逐渐增大，色纯度提高。     

POLYMER NETWORK-POLY(ETHYLENE GLYCOL)COMPLEXES WITH SHAPE MEMORY EFFECT

The complexes of poly(methacrylic acid-co-methyl methacrylate) network with poly(ethylene glycol) stabilized byhydrogen bonds were prepared. By introducing the poly(ethylene glycol), a large difference in storage modulus below andabove the glass transition temperature occurred and the complexes exhibited shape memory behaviors. The morphology ofcomplexes was studied by using DSC, WAXD, and DMA. The results indicate that the fixed phase of this kind of novelshape memory materials is the network, and the reversible phase is the amorphous state of PEG:PMAA complex phase. Theshape recoverability almost reaches 100%. This type of complexes can be regarded as a novel shape memory network.     

Emission characteristics of high-powered microwave induced plasma optical emission spectrometry by using nitrogen–oxygen mixture gas

A high-powered, microwave-induced nitrogen–oxygen plasma (N₂–O₂–MIP) generated by using an Okamoto cavity at atmospheric pressure was investigated when the observation height, the flow rate of carrier gas, and the oxygen content were varied as the experimental parameters. The emission characteristics of the plasma were evaluated with regard to the excitation temperature and the intensity ratio of atomic line to ionic line. The excitation temperature of the N₂–O₂–MIP was in the range of 5100–5700 K when the oxygen content was varied from 0 to 30% at the observation height of 7 mm and the carrier gas flow rate of 0.6 l/min. The intensity ratio of atomic line to ionic line was elevated with an increase in the oxygen content.