Hybrid device for acoustic noise reduction and energy harvesting based on a silicon micro-perforated panel structure

A kind of hybrid device for acoustic noise reduction and vibration energy harvesting based on the silicon micro- perforated panel （MPP） resonant structure is investigated in the article. The critical parts of the device include MPP and energy harvesting membranes. They are all fabricated by means of silicon micro-electro-mechanical systems （MEMS） tech- nology. The silicon MPP has dense and accurate micro-holes. This noise reduction structure has the advantages of wide band and higher absorption coefficients. The vibration energy harvesting part is formed by square piezoelectric membranes arranged in rows. ZnO material is used as it has a good compatibility with the fabrication process. The MPP, piezo- electric membranes, and metal bracket are assembled into a hybrid device with multifunctions. The device exhibits good performances of acoustic noise absorption and acoustic-electric conversion. Its maximum open circuit voltage achieves 69.41 mV.     

Broadband energy harvesting via magnetic coupling between two movable magnets

Harvesting energy from ambient mechanical vibrations by the piezoelectric effect has been proposed for powering microelectromechanical systems and replacing batteries that have a finite life span. A conventional piezoelectric energy harvester （PEH） is usually designed as a linear resonator, and suffers from a narrow operating bandwidth. To achieve broadband energy harvesting, in this paper we introduce a concept and describe the realization of a novel nonlinear PEH. The proposed PEH consists of a primary piezoelectric cantilever beam coupled to an auxiliary piezoelectric cantilever beam through two movable magnets. For predicting the nonlinear response from the proposed PEH, lumped parameter models are established for the two beams. Both simulation and experiment reveal that for the primary beam, the introduction of magnetic coupling can expand the operating bandwidth as well as improve the output voltage. For the auxiliary beam, the magnitude of the output voltage is slightly reduced, but additional output is observed at off-resonance frequencies. Therefore, broadband energy harvesting can be obtained from both the primary beam and the auxiliary beam.     

Rod‐Like Nano‐Light Harvester

Imitating the natural “energy cascade” architecture, we present a single‐molecular rod‐like nano‐light harvester (NLH) based on a cylindrical polymer brush. Block copolymer side chains carrying (9,9‐diethylfluoren‐2‐yl)methyl methacrylate units as light absorbing antennae (energy donors) are tethered to a linear polymer backbone containing 9‐anthracenemethyl methacrylate units as emitting groups (energy acceptors). These NLHs exhibit very efficient energy absorption and transfer. Moreover, we manipulate the energy transfer by tuning the donor–acceptor distance.

     

非线性磁式压电振动能量采集系统建模与分析

为便于评价、优化磁式压电振动能量采集系统的性能,系统研究了该类系统的建模与分析方法,建立了非线性的分布参数模型用于描述系统的非线性动力学行为,并采用谐波平衡法给出了谐波响应的解析解.随后利用仿真模型分析了磁铁间距、加速度幅值、负载阻抗对输出功率的影响,比较了不同激励频率和加速度幅值下的最优阻抗.结果表明:双稳态特性适用于低强度的振动环境,且愈接近临界区域,输出功率愈高,而单稳态渐硬特性适用于高强度振动环境,其最优间距并不靠近临界区域;阱间大幅运动和阱内小幅运动均存在高低能量态共存的现象,愈接近临界区域,现象愈明显;激振频率是影响最优负载阻抗的决定性因素.     

Nanoscale flexoelectric energy harvesting

One of the most tantalizing applications of piezoelectricity is to harvest energy from ambient mechanical vibrations for powering micro and nano devices. However, piezoelectricity is restricted only to certain materials and is severely compromised at high temperatures. In this article, we examine in detail, the possibility of using the phenomenon of flexoelectricity for energy harvesting. The flexoelectric effect is universally present in all dielectrics and exhibits a strong scaling with size. Using a simple beam-based paradigmatical design, we theoretically and computationally examine flexoelectric energy harvesting under harmonic mechanical excitation. We find that the output power density and conversion efficiency increase significantly when the beam thickness reduces from micro to nanoscale and flexoelectricity-based energy harvesting can be a viable alternative to piezoelectrics. Specifically, the conversion efficiency in flexoelectric transduction at sub-micron thickness levels is observed to increase by two orders of magnitude as the thickness is reduced by an order of magnitude. The flexoelectric energy harvester works even for a single layer beam with a symmetric cross section which is not possible in piezoelectric energy harvesting. Our results also pave the way for exploration of high temperature energy harvesting since unlike piezoelectricity, flexoelectricity persists well beyond the Curie temperatures of the high electromechanical coupling ferroelectrics that are often used.     

Nanopatterning of mesoporous inorganic oxide films for efficient light harvesting of dye-sensitized solar cells

Nanopatterning provides facile process to well-arrayed mesoporous inorganic oxide films at low cost by using readily available pastes and elastomeric nanostamps. The fabricated nanopattern boosted the light-harvesting efficiency of dye-sensitized solar cells (DSSCs) by a light-trapping technique. The iodine-free solid-state DSSCs showed a 40 % increase in the current density and high efficiency (7.03 %).     

All organic host-guest crystals based on a dumb-bell-shaped conjugated host for light harvesting through resonant energy transfer

Together we glow: Fully organic host-guest crystals with two dyes inserted in their parallel nanochannels display broad emission in the visible range thanks to resonant energy transfer. The conjugated host crystal provides light harvesting in the UV region.     

Light‐Harvesting Hybrid Assemblies

Light‐harvesting hybrids have gained much importance as they are considered as potential mimics for photosynthetic systems. In this Concept article we introduce the design concepts involved in the building up of light‐harvesting hybrids; these resemble the well‐studied organic‐based assemblies for energy transfer. We have structured this article into three parts based on the strategies adopted in the synthesis of hybrid assemblies, as covalent, semicovalent, and noncovalent procedures. Furthermore, the properties and structural features of the hybrids and analogous organic assemblies are compared. We also emphasize the challenges involved in the processability of these hybrid materials for device applications and present our views and results to address this issue through the design of soft‐hybrids by a solution‐state, noncovalent, self‐assembly process.     

Ruthenium(II)–Polyimine–Coumarin Light‐Harvesting Molecular Arrays: Design Rationale and Application for Triplet–Triplet‐Annihilation‐Based Upconversion

Ru^II–bis‐pyridine complexes typically absorb below 450 nm in the UV spectrum and their molar extinction coefficients are only moderate (ε<16 000 M ^?1 cm^?1). Thus, Ru^II–polyimine complexes that show intense visible‐light absorptions are of great interest. However, no effective light‐harvesting ruthenium(II)/organic chromophore arrays have been reported. Herein, we report the first visible‐light‐harvesting Ru^II–coumarin arrays, which absorb at 475 nm (ε up to 63 300 M ^?1 cm^?1, 4‐fold higher than typical Ru^II–polyimine complexes). The donor excited state in these arrays is efficiently converted into an acceptor excited state (i.e., efficient energy‐transfer) without losses in the phosphorescence quantum yield of the acceptor. Based on steady‐state and time‐resolved spectroscopy and DFT calculations, we proposed a general rule for the design of Ru^II–polypyridine–chromophore light‐harvesting arrays, which states that the ¹IL energy level of the ligand must be close to the respective energy level of the metal‐to‐ligand charge‐transfer (M LCT) states. Lower energy levels of ¹IL/³IL than the corresponding ¹M LCT/³M LCT states frustrate the cascade energy‐transfer process and, as a result, the harvested light energy cannot be efficiently transferred to the acceptor. We have also demonstrated that the light‐harvesting effect can be used to improve the upconversion quantum yield to 15.2 % (with 9,10‐diphenylanthracene as a triplet‐acceptor/annihilator), compared to the parent complex without the coumarin subunit, which showed an upconversion quantum yield of only 0.95 %.     

The modelling of an electromagnetic energy harvesting architecture

In this paper a detailed mathematical model for an electromagnetic energy harvesting architecture based on a semi-analytical approach is introduced. This model estimates the generated energy of the architecture by computing the static and dynamic magnetic and electric fields that describe its dynamics. A comparison of the static fields with the results of a Finite Element Analysis simulation in COMSOL Multiphysics shows good agreement. The model also features increased accuracy and numerical stability. In the model the semi-analytical solutions for the electromagnetic damping force exerted by the induced current coil and the induced electromotive force on the coil provide additional insight into the interactions of electromagnetic induction and damping. Additionally, the energy estimation could be used as a figure of merit in an maximization process to identify the optimal dimensions of the energy harvester.