煤油共处理油品的族组成研究

采用高效液相色谱法对兖州烟煤与催化裂化油浆共处理制备的油品的族组成进行了研究。结果表明 ,在实验条件下油品主要由烷烃和芳烃组成 ,杂原子化合物含量一般仅为 0 5 %～ 2 0 %。原料煤与油浆比例、反应温度、催化剂对油品族组成具有重要影响 ;随初始氢压不同 ,对油品族组成的影响不同 ;在 4MPa初始压力条件下 ,反应气氛 (氢气、氮气 )对煤油共处理和纯油浆制备油品的族组成影响不大。     

Synthesis of stereo-defined α-trifluoromethyl (Tfm)-malic units

Aldol reactions of titanium enolates of N-acyl-1,3-oxazolidin-2-ones with ethyl trifluoropyruvate occurred with low to good stereoselectivity depending on the steric properties of the N-acyl group. Attempts to transform the resulting aldols into peptidomimetics incorporating stereo-defined α-trifluoromethyl (Tfm)-malic units are described.     

Influence of biomass on hydrodynamics of an internal loop airlift reactor

The effect of the biomass presence on the overall circulation velocity, the linear velocities both in the riser and the downcomer and the overall gas hold-up was studied in a three-phase internal loop airlift reactor (ILALR). The measured data were compared with those obtained using a two-phase system (air—water). All experiments were carried out in a 40 dm³ ILALR at six different biomass concentrations (ranging from 0 g dm⁻³ to 7.5 g dm⁻³), at a temperature of 30°C, under atmospheric pressure. Air and water were used as the gas and liquid model media, respectively. Pellets of Aspergillus niger produced during the fermentation of glucose to gluconic acid in the ILALR were considered solid phase. In addition, liquid velocities were measured during the fermentation of glucose to gluconic acid using Aspergillus niger. All measurements were performed in a bubble circulation regime. At given experimental conditions the effect of the biomass on the circulation velocities in the ILALR was negligible. However, increasing of the biomass concentration led to lower values of the total gas hold-up. Presented at the 33rd International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, 22–26 May 2006.     

Stabilization of p-block organoelement terminal hydroxides, thiols, and selenols requires newer synthetic strategies

Metal hydroxides represent a very interesting and highly useful class of compounds that have been known to chemists for a very long time. While alkali and alkaline earth metal hydroxides (s‐block) are commonplace chemicals in terms of their abundance and their use in a chemical laboratory as bases, the interest in Brønsted acidic molecular terminal hydroxides of p‐block elements, such as aluminum and silicon, has been of recent origin, with respect to the variety of applications these compounds can offer both in materials science and catalysis. Moreover, these systems are environmentally friendly, relative to the metal halides, owing to their ‐OH functionality (resembling that of water). Design and conceptualization of the corresponding terminal thiols, selenols, and tellurols (M? SH, M? SeH, and M? TeH) offer even more challenging problems to synthetic inorganic chemists. This concept summarizes some of the recent strategies developed to stabilize these otherwise very unstable species. The successful preparation of a number of silicon trihydroxides a few years back resulted in the generation of several model compounds for metal–silicates. The recent synthesis of unusual aluminum compounds such as RAl(OH)₂, RAl(SH)₂, and RAl(SeH)₂ with terminal EH (E=O, Se, or Se) groups is likely to change the ways in which some of the well‐known catalytic conversions are being carried out. The need for very flexible and innovative synthetic strategies to achieve these unusual compounds is emphasized in this concept.     

Sound velocity in different reacting thermal plasma systems

In most cases the energy dissipated in plasma jets used either,for heating or spraying is varied by changing the are current, the total gas floc+rate, and composition. However, when doing so, conditions are reached where the plasma jet may become supersonic. To predict such conditions or to characterize supersonic plasma jets the knowledge of the sound velocitya is mandatory The goal of this paper is to calculatea versus plasma forming gas composition, temperature, and pressure. Rigorous calculation would imply the knowledge of the chemical reaction kinetics, sound velocity depending strongly on this. Unfortunately such kinetics are generally lolknown for plasma jet floras and the only possibility is to determine the equilibrium sound velocitya calculated through the isentropic coefficient T. This coefficient has been calculated taking into account the dissociation and ionization reactions at equilibrium for temperatures ranging from 300 to 25,000 K and pressures between 0.1 and 1 Mpa for Ar, H₂, He, Ar-He, Ar-H₂, O₂, N₂, air, .steam, and methane.a often called the frozen sound velocity, was also calculated using (ratio of specific heats) instead of .     

Studies on the thermotropic liquid-crystalline polymer. VIII. Synthesis and properties of fully aromatic poly(ester)s and poly(amide-ester)s containing p-phenylene diacrylic group

Three series of polymers containing p-phenylene diacrylic group were prepared by direct polycondensation in the presence of diphenylchlorophosphate and pyridine. Series I was prepared from p-phenylene bis(acrylic acid) with various hydroquinones. Series II was prepared from p-phenylene bis (β-cyano acrylic acid) with methylhydroquinone. Series III was prepared from 3-methyl-4-aminophenol with p-phenylene bis(acrylic acid) or p-phenylene bis(β-cyano acrylic acid), respectively. The phase behavior of these polymers was studied by differential scanning calorimetry (DSC), optical polarizing microscopy equipped with a heating stage, and wide-angle x-ray diffraction (WAXD). It was found that these polymers, except IIIb , exhibit thermotropic liquid-crystalline properties and show threaded or Schlieren texture under the optical polarizing microscopic observation. Furthermore, the melting temperatures of these polymers were decreased in the range of 254–354°C by incorporating with p-phenylene diacrylic group into the main chain. © 1993 John Wiley & Sons, Inc.     

Simultaneous Spectrophotometric Determination of Group B Vitamins Using Parallel Factor Analysis: PARAFAC

In this work, a simple and rapid analytical procedure was applied for simultaneous determination of folic acid (vitamin B₀), thiamin (vitamin B₁), riboflavin (vitamin B₂) and pyridoxal (vitamin B₆) based on the absorbance data in the pH range 2.0‐12.0 at 25 °C using parallel factor analysis (PARAFAC). The effect of the pH as the most important factor on the sensitivity of the determination was studied. The spectral data were recorded in 400‐650 nm intervals and a 2‐12 pH range for all four vitamins. The calibration set was constructed in the concentration ranges of 4‐22, 1‐20, 6‐26, and 4‐20 μg mL^?;1 for B₆,B₂,B₁ and B₀, respectively. The root mean squares errors of prediction for the prediction set, (RMSEP), are 0.65, 0.63, 1.13 and 0.34 for B₀,B₁,B₂ and B₆, respectively. The recovery percent for the validation set are in the range of 90.6 to 107.0%. The effect of the experimental conditions and diverse species were discussed. The optimum values of these factors were searched according to the relative standard deviation of the prediction set of mixtures solutions.     

Neue acetonylsubstituierte Azole I. 5-Acetonyl-1,2,4-oxadiazole

Aliphatic amidoximesR—C (NH₂)=NOH react with diketene to yield 5-acetonyl-3-alkyl-1,2,4-oxadiazoles, which are susceptible to a wide variety of reactions at the keto-group as well as at the methylene-group. Their transformations into 1-methyl-2-oxadiazolyl-vinylN,N-dimethylcarbamates, 2-chloro-1-oxadiazolylpropenes, 1-oxadiazolyl-2-(1,2,4-triazol-1-yl)propenes, 1,1-dichloro-1-oxadiazolylacetones and 3-hydroxy-2-oxadiazolyl-crotonic amides are described as well as their reactions with diazonium salts, with sodium nitrite and with carbon disulfide. Further products obtained are carbamates of of 1-oxadiazolyl-2-oxo-propane-1-oximes, 2-chloro-2-oxadiazolylvinyl phosphates and an oxadiazolyl pyrimidine.

Herrn Prof. Dr.Klaus Weissermel zu seinem 60. Geburtstag.