Baker''''s yeast mediated reduction of substituted acenaphthenequinones: Regio-and enantioselective preparation of mono-hydroxyacenaphthenones

Baker's yeast mediated reduction of acenaphthenequinone within 4-10 h afforded mono-hydroxyacenaphthenone mainly with low enantioselectivity, the substrate and mono-hydroxyacenaphthenone product almost converted to dihydroxyacenaphthene after 48 h. By control of the reaction time and in the presence of DMF as co-solvent, the reduction of 6-substituted acenaphthenequinones under vigorous agitation afforded the corresponding 2-hydroxyacenaphthenones in 24-84% yields with 10-93% ee.     

Synthesis and anticonvulsant activity of new fluorinated N-phenyl- and N-benzyl-2-azaspiro[4.4]nonane- and [4.5]decane-1,3-dione derivatives: Part III

A series of N-phenyl- and N-benzyl-2-azaspiro[4.4]nonane- and [4.5]decane-1,3-diones containing a fluoro or trifluoromethyl substituents at the aryl ring was synthesized and tested for their anticonvulsant activity in the maximal electroshock (MES) and subcutaneous metrazole (sc.Met) tests. Among them, the most active were N-benzyl derivatives with fluoro and trifluoromethyl substituents especially at position-2 of the aryl moiety. The introduction of the phenyl ring at the imide nitrogen atom resulted in less active compounds. The results obtained showed that incorporation of fluoro or trifluoromethyl substituents increased the anticonvulsant activity in comparison to respective chloro, methoxy or methyl analogues. Crystallographically obtained conformation for one active and two inactive derivatives with trifluoromethyl substituents at position-2 or -3 of phenyl ring were initially used for molecular electrostatic potentials (MEP) calculation. The MEP distribution at carbonyl oxygen atoms was different for active and inactive molecules.     

Simultaneous speciation of mercury and butyltin compounds in natural waters and snow by propylation and species-specific isotope dilution mass spectrometry analysis

A robust method has been developed for simultaneous determination of mercury and butyltin compounds in aqueous samples. This method is capable of providing accurate results for analyte concentrations in the picogram per liter to nanogram per liter range. The simultaneous determination of the mercury and tin compounds is achieved by species-specific isotope dilution, derivatization, and gas chromatography–inductively coupled plasma mass spectrometer (GC–ICP–MS). In derivatization by ethylation and propylation, reaction conditions such as pH and the effect of chloride were carefully studied. Ethylation was found to be more sensitive to matrix effects, especially for mercury compounds. Propylation was thus the preferred derivatization method for simultaneous determination of organomercury and organotin compounds in environmental samples. The analytical method is highly accurate and precise, with RSD values of 1 and 3% for analyte concentrations in the picogram per liter to nanogram per liter range. By use of cleaning procedures and SIDMS blank measurements, detection limits in the range 10–60 pg L^–1 were achieved; these are suitable for determination of background levels of these contaminants in environmental samples. This was demonstrated by using the method for analysis of real snow and seawater samples. This work illustrates the great advantage of species-specific isotope dilution for the validation of an analytical speciation method—the possibility of overcoming species transformations and non-quantitative recovery. Analysis time is saved by use of the simultaneous method, because of the use of a single sample-preparation procedure and one analysis.     

Ion Transfer in CdF<Subscript>2</Subscript>-based Iso- and Polyvalent Solid Solutions

The ionic conductivity of solid solution Cd_0.77Sr_0.23F₂ is 1.6 × 10⁻⁴ S/cm at 500 K. The conduction mechanism changes from a vacancy mechanism to an interstitial one at 523–553 K. In solid solutions Cd_0.9R_0.1F_2.1 (R = La-Lu, Y), the activation enthalpy of conduction decreases from 0.9 to 0.8 eV with decreasing ionic radius of R³⁺, raising the 500-K conductivity from 6 ×10⁻⁶ S/cm for La³⁺to 6 × 10⁻⁵ S/cm for Lu³⁺. For crystalline Cd_0.95In_0.05F_2.05, ionic and electronic conductivities at 313 K equal 5 × 10⁻⁴ and 5 − 10⁻⁶ S/cm.__________Translated from Elektrokhimiya, Vol. 41, No. 5, 2005, pp. 627–632.Original Russian Text Copyright © 2005 by Sorokin, Buchinskaya, Sul’yanova, Sobolev.     

Electroreduction of α-glucose on CNT/graphite electrode modified by Zn and Zn–Fe alloy

Electroreduction of -glucose to form sorbitol on Zn/CNTs and Zn alloy/CNTs electrodes has been investigated in this paper. Carbon nanotubes (CNTs) used in this paper are grown directly on graphite disks by chemical vapor deposition. Zn and Zn alloy are electrodeposited on the activated CNTs/graphite electrode by pulse galvanostatic method. The micrographs of Zn/CNTs and Zn alloy/CNTs electrodes are characterized by scanning electron microscopy. The results show that the current efficiency of -glucose reduction on CNTs electrodes is much better than that on flat Zn electrodes. The order of the current efficiency on different electrodes is as follows: Zn/CNT (0.58) Zn–Fe/CNT (0.57)>Zn–Ni/CNT (0.43) Zn/graphite (0.42)>Zn (0.40). It indicates that CNTs have good potential application in electrosynthesis. Additionally, effects of some operating parameters, such as pH, temperature and -glucose concentration, on the current efficiency of -glucose reduction are also discussed.     

Preconcentration and separation of iron, zinc, cadmium and mercury, from waste water using Nile blue a grafted polyurethane foam

The present work describes a novel method for the incorporation of Nile blue A into polyurethane foam matrix. This foam material was found to be very suitable for the extraction of metal ions from aqueous solutions. The characterization of Nile blue A grafted foam and the effect of halide concentration, pH, shaking time, extraction isotherm and capacity have been investigated. This foam material was found to be suitable for the separation and preconcentration of iron (III), zinc (II), cadmium (II) and mercury (II) from waste water. The extraction was accomplished in (15-20) minutes. Iron was separated from acid medium (2-4 M HCl), zinc from (3-5 M HCl), cadmium from (4-6 M HCl) as thiocyanate complexes and mercury was separated from (1-2 M HCl) as chloride.     

聚烯烃（聚乙烯）低温热氧化与降解

综述了近年来聚烯烃特别是聚乙烯的低温热氧化机理，动力学以及氧化降解研究现状及发展，指出现今低温热氧化与降解研究意义。     

MENTHOR,a database system for the storage and retrieval of three-dimensional molecular structures and associated data searchable by substructural,biologic, physical,or geometric properties

Summary MENTHOR is a database system for the storage and retrieval of three-dimensional coordinate and charge information on molecules as well as of traditional biological and physical properties. Our molecular graphics system retrieves from MENTHOR structural information in individual molecules and receptor map/macromolecular binding site hypotheses. Substructural searches of MENTHOR are used to find starting coordinates for molecular modeling and traditional database searches of MENTHOR identify compounds for which modeling is needed. It also forms the data to be searched with ALLADDIN, our substructure/geometric search program. MENTHOR expedites molecular modeling by organizing previous work and facilitating transmission of information between individuals. Examples from modeling of D-2 receptor agonists are shown.     

Some Reactions of 5-(3 or 4-Pyridyl)-1,3,4-Oxadiazoles with Amines and Hydrazines

2-Amino-and 2-hydrazino-5-(3 or 4-pyridyl)-1, 3, 4-oxadiazoles [II_i-k] have been prepared by racting 2-chloro derivatives with the corresponding amines or hydrazines, the 2-hydrazino (II_i-k) compounds that obtained were heated with carbon disulphide and alcoholic potassium hydroxide where 5-(3 or 4-pyridyl)-1,3,4-oxadiazolo (2,3-C)-1,2,4-triazole 5-thione (III_a-c) were obtained, the given structures were biologically screened.     

Pulse plating effect on microstructure and corrosion properties of Zn–Ni alloy coatings

The influence of pulse plating parameters on the surface morphology, grain size, lattice imperfection and corrosion properties of Zn–Ni alloy has been studied. The coatings were electrodeposited in an alkaline cyanide-free solution. AFM was applied for surface morphology examination, XRD measurements were carried out for phase composition and texture analysis, electron probe microanalysis was used for alloy chemical composition studies, while electrochemical techniques were applied for corrosion performance evaluation. The pulse plated Zn–Ni coatings appeared to consist of the γ-Zn₂₁Ni₅ phase and the composition of the alloy depended on the plating parameters. The grain size, lattice imperfection and homogeneity of grain distribution were established to be the main factors determining corrosion behaviour of the coating. Presented at the 4th Baltic Conference on Electrochemistry, Greifswald, March 13–16, 2005