Theoretical Study of Rotational Isomerism in Ethyl Pseudohalides

The structure and conformational stability of ethyl pseudohalides CH₃CH₂ — XCN (X = O, S, Se) were investigated using ab initiocalculations at the MP2 level of theory with a triple- basis set augmented with polarization and diffusion functions. Full optimization was performed on the minimum energy structures as well as on the transition state forms. The relative stabilities of rotational conformers were calculated at the MP4 level using MP2 optimized reference geometries. The nature of all considered stationary points was verified by calculation of the harmonic vibrational frequencies. The calculated bond lengths, bond angles, dipole moments, and rotational constants of optimized global minima structures agree very well with the corresponding experimental data obtained from microwave spectroscopic studies. Also, available experimental frequencies are in good accord with the theoretical values. For ethyl cyanate CH₃CH₂ — OCN, the antiperiplanar (trans) form is predicted to be more stable than the synclinal (gauche) form, and the synperiplanar (cis) form corresponds to the transition state. For both ethyl thiocyanate CH₃CH₂ — SCN and ethyl selenocyanate CH₃CH₂ — SeCN, the gaucheform is the global minimum while the trans-conformer is a local minimum and the cis-form is a transition state.     

The Studies of the Heterogeneous Properties of Solid Surfaces by Means of the Derivatograph Q-1500 D

A simple method has been adopted to obtain an important information on the heterogeneous properties of materials studied, adsorbed liquid films and liquid-solid interactions. The method utilizes Q-TG mass loss and the first derivative Q-DTG mass loss curves with respect to temperature and time obtained during programmed liquid thermodesorption in quasi-isothermal conditions. The values of the adsorption capacity, total porosity of material, the value of active centers, desorption energy distribution and mesopore-size distribution functions obtained by this method are in good agreement with those estimated on the basis of independent methods. The theoretical and experimental results provided novel and unique data on the heterogeneity of solid surfaces, properties of liquid adsorbed films and thermal stability of the liquid/solid interfaces. This paper presents the more important results obtained so far in the studies the liquid/solid systems by means of the Paulik's classical and quasi-isothermal techniques. This revised version was published online in July 2006 with corrections to the Cover Date.     

Which Extraction Solvents and Methods Are More Effective in Terms of Chemical Composition and Biological Activity of Alcea fasciculiflora from Turkey?

The bioactive content, antioxidant properties, and enzyme inhibition properties of extracts of Alcea fasciculiflora from Turkey prepared with different solvents (water, methanol, ethyl acetate) and extraction methods (maceration, soxhlet, homogenizer assisted extraction, and ultrasound assisted extraction) were examined in this study. UHPLC-HRMS analysis detected or annotated a total of 50 compounds in A. fasciculiflora extracts, including 18 hydroxybenzoic and hydroxycinnamic acids, 7 Hexaric acids, 7 Coumarins, 15 Flavonoids, and 3 hydroxycinnamic acid amides. The extracts had phenolic and flavonoid levels ranging from 14.25 to 24.87 mg GAE/g and 1.68 to 25.26 mg RE/g, respectively, in the analysis. Both DPPH and ABTS tests revealed radical scavenging capabilities (between 2.63 and 35.33 mg TE/g and between 13.46 and 76.27 mg TE/g, respectively). The extracts had reducing properties (CUPRAC: 40.38–78 TE/g and FRAP: 17.51–42.58 TE/g). The extracts showed metal chelating activity (18.28–46.71 mg EDTAE/g) as well as total antioxidant capacity (phosphomolybdenum test) (0.90–2.12 mmol TE/g). DPPH, ABTS, FRAP, and metal chelating tests indicated the water extracts to be the best antioxidants, while the ethyl acetate extracts had the highest overall antioxidant capacity regardless of the extraction technique. Furthermore, anti-acetylcholinesterase activity was identified in all extracts (0.17–2.80 mg GALAE/g). The water extracts and the ultrasound-assisted ethyl acetate extract were inert against butyrylcholinesterase, but the other extracts showed anti-butyrylcholinesterase activity (1.17–5.80 mg GALAE/g). Tyrosine inhibitory action was identified in all extracts (1.79–58.93 mg KAE/g), with the most effective methanolic extracts. Only the ethyl acetate and methanolic extracts produced by maceration and homogenizer aided extraction showed glucosidase inhibition (0.11–1.11 mmol ACAE/g). These findings showed the overall bioactivity of the different extracts of A. fasciculiflora and provided an overview of the combination of solvent type and extraction method that could yield bioactive profile and pharmacological properties of interest and hence, could be a useful reference for future studies on this species.     

Effect of Different Processing Methods on the Chemical Constituents of Scrophulariae Radix as Revealed by 2D NMR-Based Metabolomics

Scrophulariae Radix (SR) is one of the oldest and most frequently used Chinese herbs for oriental medicine in China. Before clinical use, the SR should be processed using different methods after harvest, such as steaming, “sweating”, and traditional fire-drying. In order to investigate the difference in chemical constituents using different processing methods, the two-dimensional (2D) ¹H-¹³C heteronuclear single quantum correlation (¹H-¹³C HSQC)-based metabolomics approach was applied to extensively characterize the difference in the chemical components in the extracts of SR processed using different processing methods. In total, 20 compounds were identified as potential chemical markers that changed significantly with different steaming durations. Seven compounds can be used as potential chemical markers to differentiate processing by sweating, hot-air drying, and steaming for 4 h. These findings could elucidate the change of chemical constituents of the processed SR and provide a guide for the processing. In addition, our protocol may represent a general approach to characterizing chemical compounds of traditional Chinese medicine (TCM) and therefore might be considered as a promising approach to exploring the scientific basis of traditional processing of TCM.     

Иследоваиие Иследоваиие иоверхиостеӥ

Die zunehmende Industrialisierung der landwirtschaftlichen Production bei höheren Qualitätsanforderungen verlangt objective und hochempfindliche Kontrollverfahren.

Zur zerstörungsfreien Ermittlung innerer Qualitätsmängel an Früchten, z.B. Kartoffelknollen, können lichtoptische Verfahren wegen der starken Streuung nicht umfassend eingesetzt werden. Deshulb wurde unter Einsatz weicher Gammastrahlung (²⁴¹ Am) versucht, “trockene” Hohlstellen, insbesondere bedingt durch Hohlherzigkeit, in Kartoffelknollen zu erkennen. Es konnte gezeigt werden, daβbei einem Erkennungsfehler von etwa 13% diese Mängel (ab ca. 5 mm Durchmenser) zu erkennen sind, auch wenn die Knollen nur in einer durch die Knollenmitte verlaufenden Ebene durchstrahlt werden.     

The U.S. Department of Energy (DOE) Sampling and Analytical Chemistry Guide: Doe Methods for Evaluating Environmental and Waste Management Samples

Abstract

DOE Methods for Evaluating Environmental and Waste Management Samples (DOE Methods) is a guidance/methods document to support sampling and analysis activities at DOE sites. DOE Methods is intended to supplement existing guidance documents (e.g., EPA's Test Methods for Evaluating Solid Waste, SW-846), which generally apply to low-level or nonradioactive samples. DOE Methods targets the complexities of DOE radioactive mixed waste and environmental samples. The document contains quality assurance (QA), quality control (QC), safety, sampling, organic analysis, inorganic analysis, and radioanalytical guidance as well as sampling and analytical methods. An addendum is distributed every six months (April and October) with updated guidance and additional methods.

DOE Methods provides a vehicle for technology transfer within the environmental restoration (ER) and waste management (WM) (collectively known as EM) community. As DOE Methods evolves, its usefulness and applicability are anticipated to grow to meet the demands of the DOE/EM mission. At the present time, DOE Methods contains methods and guidance information supplied by DOE sites. Because the EM activities in DOE are not unique to the United States, the international environmental community could benefit from the information gathered for the DOE program. This information could provide additional resources for their EM activities.     

Recent progress in the chemistry of heterocycles incorporated oxazolo[4,5-b]pyridine and oxazolo[5,4-b]pyridine skeletons

Abstract

The present study describes recent advances in the chemistry of heterocycles incorporated oxazolo[4,5-b]pyridine and oxazolo[5,4-b]pyridine skeletons. The main sections included the synthesis of the investigated compounds from readily accessible aminopyridinol derivatives or aminopyridines. The reactivity of substituents attached to ring carbon or nitrogen atoms were discussed. In addition, the synthetic and biological evaluation of the inspected oxazolopyridines were highlighted. The purpose of this review is to discuss the chemistry of the title so far. The present study will support researchers in the fields of organic and medicinal chemistry to design and develop new protocols for the construction of new biological components.     

A Novel One Pot Synthesis of o‐Nitrophenylacetic Acid and Unexpected p‐Nitrobenzoic Acid by HNO3‐Mediated CH2 Extrusion Reaction of Phenylacetic Acid

The HNO₃‐mediated CH₂ extrusion reactions of phenylacetic acid lead to one pot synthesis of unexpected commercially important product 4‐nitrobenzoic acid through the formation of 4‐nitrophenylacetic acid and 2‐nitrophenylacetic acid.