Dipolar relaxations in an epoxy-amine system

Dipolar relaxations in a reactive epoxy-amine system based on diglycidyl ether of bisphenol A with 4,4^′-diaminodiphenylsulfone were studied with the Havriliak-Negami function. The system was cured isothermally at 140 °C using simultaneous kinetic and microdielectric studies.The relaxation time was calculated from the frequency f_max of the peak of the loss factor ε^′′ versus frequency f. A linear relation exists between the logarithm of the relaxation time τ and the glass transition temperature T_g. Then, logτ follows the Di Benedetto equation revisited by Pascault and Williams allowing the prediction of the relaxation time τ during cure.The unrelaxed permittivity at high frequency ε_u, the relaxed or static permittivity ε_s and the skewness parameter β were found independent on the conversion or the curing time. The distribution parameter α decreases as curing time t increases. The difficulty of orientation of dipoles in the electric field due to vitrification is responsible of these behaviours.     

Die stufenweise Syntheseo,o′-methylenverbrückter Cyclohexamerer mitp-Kresol- oderP-Kresol- und 4-tert-Butylphenol-Bausteinen Vergleich mit ähnlich strukturierten Kettenoligomeren

Two phenolic alcohols with six phenolic units in their molecules have been obtained by stepwise syntheses starting from simple phenolic derivatives. The phenolic alcohols were cyclized in a one step cyclization by boiling in a very diluted acetic acid solution. A two step cyclization of a phenolic alcohol with three phenolic units to a cyclohexamer proceeds only with poor yields. The cyclic compounds were compared with chainlike oligomers containing six phenolic units in their molecules.

Herrn Prof. Dr.H. F. Mark mit allen guten Wünschen zum 85. Geburtstag gewidmet.     

The thermal properties of poly(oxy-1,4-benzoyl), poly(oxy-2,6-naphthoyl), and its copolymers

The thermal properties, i.e., heat capacity, enthalpy, entropy, and Gibbs function, and the transition behavior of the copolymer system of 4-hydroxybenzoic acid and 2,6-hydroxynaphthoic acid have been studied based on differential scanning calorimetry. The heat capacities of the glass, crystal, and anisotropic melt are shown to be largely additive on a molar basis. Additivity is lost in the two transition regions, glass transition and disordering transition. Isothermal crystallization experiments on the copolymers revealed the existence of two types of crystals which melt at high temperature (fast-grown crystals) and low temperature (slowly grown crystals). The ATHAS computation method is used to bring heat capacities of the solid state into agreement with approximate frequency spectra. The changes in heat capacity at the glass transitions occur at 434°K for the poly(oxy-1,4-benzoyl) [33.2 J/(K mol)] and at 420°K for poly(oxy-2,6-naphthoyl) [46.5 J/(K mol)]. The copolymers have a transition range of above 100°K. The anisotropic melt is linked to the well-known condis state of poly(oxy-1,4-benzoyl) by a continuous changes in disorder and mobility without an additional first-order transition.     

NMR characterization of new 10-membered-ring macrolactones and dihydrobenzophenazine-5-one, oxidized derivatives of benzo[a]phenazines

Peroxidation of the phenazine of beta-lapachone using m-ClC6H4CO3H-CH2Cl2 furnished a macrolactone with a rigid 10-membered ring, and the corresponding N-oxide, along with a dihydrobenzophenazine-5-one. All of the new compounds were fully characterized by spectroscopic methods, with the unambiguous assignment of the hydrogens and carbon NMR signals for the N-oxide, with the aid of 2-D NMR, mainly COSY, HMQC, HSQC and HMBC. For the other two compounds some signals could not be assigned owing to their own intrinsic features.     

Novel synthesis and properties of 7,9-dimethylcyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborate: autorecycling oxidation of some alcohols under photo-irradiation

Three-step reactions starting from 2-chlorotropone with barbituric acid afforded novel 7,9-dimethylcyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborate (9·BF₄⁻), which is the isoelectronic compound of the 5-ethyl-3-methyllumiflavinium ion. The stability of cation 9 is expressed by the pK_R+ value, which was determined spectrophotometrically, as ca. 6.0. The electrochemical reduction of 9 exhibited low reduction potential at −0.58 (V vs Ag/AgNO₃), upon cyclic voltammetry (CV). In a search for the reactivity, reactions of 9·BF₄⁻ with some nucleophiles, hydroxide, hydride, amines, thiols, and methanol, were carried out to exhibit that the introduction of nucleophiles is dependent on the nucleophile itself. The photo-induced oxidation reactions of some alcohols catalyzed by 9·BF₄⁻ under aerobic conditions were carried out to give the corresponding carbonyl compounds in more than 100% yield [based on compound 9·BF₄⁻], suggesting the oxidizing function of 9·BF₄⁻ toward alcohols in the autorecycling process. The UV-vis and fluorescence spectra of 9 were studied to suggest the electron transfer from alcohols to the excited 9.     

Stereoselective synthesis of (±)-indolizidines 167B and 209D and theirtrans-isomers based on the reductive allylboration of pyridine

A general method for the synthesis of 5-substituted indolizidines based on intramolecular cyclization oftrans- andcis-2-allyl-6-R-1,2,3,6-tetrahydropyridines, obtained from pyridine and triallylborane, has been elaborated. The closure of the five-membered ring is carried out by hydroboration-oxidation followed by cyclization of the resulting δ-amino alcohols in the presence of the Ph₃P−CBr₄−Et₃N system. (Pr₂BH)₂ and Pr₃B are used as the hydroborating reagents, and H₂O₂ in an acid medium is used for the oxidation of 2-[3-(dipropylboryl]-Δ²-piperideines formed. This method has been used for the synthesis of two natural alkaloids: indolizidine 209D (cis-5-hexylindolizidine) and itstrans-isomer were prepared fromcis- andtrans-2-allyl-6-hexyl-1,2,3,6-tetrahydropiridine, respectively; indolizidine 167B andtrans-5-propylindolizidine were synthesized fromcis- andtrans-2,6-diallyl-1,2,3,6-tetra-hydropyridine, respectively. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 971–979, May, 1998.     

Using a process-centered approach to minimize the effort of compliance

 The complexity of different quality standards can, in principle, be covered by different approaches and strategies. In-depth process mapping of quality control (QC) work streams was used by the analytical laboratories of Lonza AG to show up the principle differences in being compliant to different quality systems. The results identified two main drivers for all necessary actions: process-related activities and infrastructure-related activities. In addition, a clear indication of the economic impact of these driving forces was gained, which led the laboratories to decide on a process-oriented approach. This approach has the advantage of being able to reflect the different demands of different quality assurance (QA) regulations within the same QC organizational structure. Following the process helps avoid unnecessary efforts in analytical work and represents a very economical approach, at the same time, providing high flexibility to react to different QA or customer demands. Received: 5 July 2002 Accepted: 12 November 2002 Acknowledgements The process-oriented approach resulted from many, very challenging discussions for which I would like to thank the staff of my organization (Analytics & QC), especially, the QA staff and the LIMS team. Presented at Analytica Conference, 23–26 April 2002, Munich, Germany Correspondence to B. Ciommer     

Photochemical degradation of hyaluronic acid by singlet oxygen

Changes of the rheological properties of hyaluronic acid (sodium-magnesium salt) solutions after exposure to UV radiation indicate a vigorous decrease in their viscosity, but its still strong shear rate dependence. Whereas the presence of the singlet oxygen sensitizer (anthracene-1-sulphonic acid) brings about a loss of shear dependence; the studied solutions show newtonian behavior.     

A characterization of brownian motion in a lipschitz domain by its killing distributions

Let (Y _t, Q^x) be a strong Markov process in a bounded Lipschitz domainD with continuous paths up to its lifetime , and let (X _t, P^x) be a Brownian motion inD. IfY _– exists in D andQ ^x(Y_– C)=P^x(X_– C) for all Borel subsetsC of D and allx, thenY is a time change ofX.