An unequivocal synthesis of some substituted 1,2,4-triazolo[1,5-a]pyrimidines

An unequivocal synthesis of 5-chloro-7-methyl- (8) and 7-methyl-1,2,4-triazolo[1,5-a]pyrimidine (10) from 2-amino-4-chloro-6-methylpyrimidine (5) through the corresponding amidine6 and formamide oxime7 was developed. It was unambigously shown by comparison of the chemical shifts and the magnitude of coupling constants that the compounds obtained by condensation of 3-amino-1,2,4-triazole (12) and ethyl acetoacetate (13) and some further transformations are isomeric 5-methyl substituted 1,2,4-triazolo[1,5-a]pyrimidines1,9, and11.

---

Eine eindeutige Synthese einiger substituierter 1,2,4-Triazolo[1,5-a]pyrimidine

Zusammenfassung Es wurde ein eindeutiger Syntheseweg für 5-Chlor-7-methyl- (8) und 7-Methyl-1,2,4-triazolo[1,5-a]pyrimidin (10) ausgehend von 2-Amino-4-chlor-6-methylpyrimidin (5) über das entsprechende Amidin6 und das Formamidoxim7 entwickelt. Durch Vergleich von chemischen Verschiebungen und Kopplungskonstanten konnte eindeutig gezeigt werden, daß die Verbindungen, die bei der Kondensation von 3-Amino-1,2,4-triazol (12) and Ethylacetoacetat (13), sowie einige weitere Transformationsprodukte, isomere 5-Methylsubstituierte 1,2,4-Triazolo[1,5-a]pyrimidine sind (1,9,11).

     

Dipolar relaxations in an epoxy-amine system

Dipolar relaxations in a reactive epoxy-amine system based on diglycidyl ether of bisphenol A with 4,4^′-diaminodiphenylsulfone were studied with the Havriliak-Negami function. The system was cured isothermally at 140 °C using simultaneous kinetic and microdielectric studies.The relaxation time was calculated from the frequency f_max of the peak of the loss factor ε^′′ versus frequency f. A linear relation exists between the logarithm of the relaxation time τ and the glass transition temperature T_g. Then, logτ follows the Di Benedetto equation revisited by Pascault and Williams allowing the prediction of the relaxation time τ during cure.The unrelaxed permittivity at high frequency ε_u, the relaxed or static permittivity ε_s and the skewness parameter β were found independent on the conversion or the curing time. The distribution parameter α decreases as curing time t increases. The difficulty of orientation of dipoles in the electric field due to vitrification is responsible of these behaviours.     

Photochemical degradation of hyaluronic acid by singlet oxygen

Changes of the rheological properties of hyaluronic acid (sodium-magnesium salt) solutions after exposure to UV radiation indicate a vigorous decrease in their viscosity, but its still strong shear rate dependence. Whereas the presence of the singlet oxygen sensitizer (anthracene-1-sulphonic acid) brings about a loss of shear dependence; the studied solutions show newtonian behavior.     

Global optimization of univariate Lipschitz functions: II. New algorithms and computational comparison

We consider the following global optimization problems for a Lipschitz functionf implicitly defined on an interval [a, b]. Problem P: find a globally-optimal value off and a corresponding point; Problem Q: find a set of disjoint subintervals of [a, b] containing only points with a globally-optimal value and the union of which contains all globally optimal points. A two-phase algorithm is proposed for Problem P. In phase I, this algorithm obtains rapidly a solution which is often globally-optimal. Moreover, a sufficient condition onf for this to be the case is given. In phase II, the algorithm proves the-optimality of the solution obtained in phase I or finds a sequence of points of increasing value containing one with a globally-optimal value. The new algorithm is empirically compared (on twenty problems from the literature) with a best possible algorithm (for which the optimal value is assumed to be known), with a passive algorithm and with the algorithms of Evtushenko, Galperin, Shen and Zhu, Piyavskii, Timonov and Schoen. For small, the new algorithm requires only a few percent more function evaluations than the best possible one. An extended version of Piyavskii's algorithm is proposed for problem Q. A sufficient condition onf is given for the globally optimal points to be in one-to-one correspondance with the obtained intervals. This result is achieved for all twenty test problems.The research of the authors has been supported by AFOSR grants 0271 and 0066 to Rutgers University. Research of the second author has been also supported by NSERC grant GP0036426, FCAR grant 89EQ4144 and partially by AFOSR grant 0066. We thank Nicole Paradis for her help in drawing the figures.     

On the Agmon-Miranda maximum principle for solutions of strongly elliptic equations in domains of ℝn with conical points

In this paper the Agmon-Miranda maximum principle for solutions of strongly elliptic differential equations Lu = 0 in a bounded domain G with a conical point is considered. Necessary and sufficient conditions for the validity of this principle are given both for smooth solutions of the equation Lu = 0 in G and for the generalized solution of the problem Lu = 0 in G, D _k ^v u = gk on G (k = 0,...,m-1). It will be shown that for every elliptic operator L of order 2m > 2 there exists such a cone in ⁿ (n4) that the Agmon-Miranda maximum principle fails in this cone.     

HPLC monitored synthesis of R2NCH2 substituted benzene derivatives used as (C,N)-ligands for organometallic compounds

2-(Diethylaminomethyl)phenyl bromide and 1,3-bis(dimethylaminomethyl)-benzene, useful ligands for the synthesis of hypervalent organometallic compounds, were prepared and characterized by NMR (¹H, ¹³C, 2D experiments) spectroscopy. Their synthesis was monitored by the HPLC method. The compounds were eluted on a Nucleosil 120 Si column (5 μm, 25×0.4 cm) with n-hexane at room temperature using a 1.0 ml/min flow-rate. The maximum values of absorbance for the studied compounds, excepting the diethylamine, were located in a narrow range around 212 nm, the wavelength used for their UV detection. The diethylamine was detected at 190 nm. The calibration curves are straight lines with correlation factors r>0.995. The HPLC data are in good agreement with those provided by NMR spectroscopy.     

Use of a Dual-Marker Form of Analysis to Estimate Binding Constants Between Receptors and Ligands by Affinity Capillary Electrophoresis

This work describes the use of a dual-standard analysis approach termed the time-average ratio (TAR) in affinity capillary electrophoresis (ACE) to estimate binding constants of receptors to ligands. In this form of analysis the TAR is the migration time of the receptor divided by the average of the sum of the migration times of two non-interacting standards. This change in TAR as a function of the concentration of ligand yields a value for the binding constant. This concept is demonstrated using three model systems: carbonic anhydrase B (CAB, EC 4.2.1.1) and arylsulfonamides, vancomycin (Van) and ristocetin (Rist) from Streptomyces orientalis and Nocardia lurida, respectively, and d-Ala- d-Ala terminus peptides. Three ACE techniques are used to examine the three systems: standard ACE, flow-through partial-filling ACE (FTPFACE), and on-column derivatization coupled to ACE. The findings described here demonstrate that ACE data analyzed using the TAR form of analysis yield binding constants between receptors and ligands comparable to those estimated using other ACE forms of analysis. A comparison to three other forms of analysis is described.     

高空核电磁脉冲模拟波形的双指数函数拟合法

 许多标准和公开出版物中都用双指数函数描述高空核电磁脉冲典型波形。通过数值方法，研究了双指数函数一项重要的性质。根据该性质，详细讨论了高空核电磁脉冲模拟波形数值拟合中，双指数函数特征参数与脉冲峰值、前沿、后沿以及半宽等物理参数的关系，从而提出一种简单有效的脉冲参数计算方法。通过IEC标准中规定的高空核电磁脉冲参数的估计与一个实测高空核电磁脉冲模拟波形的数值拟合，验证了该方法的有效性和可靠性。该方法能够适应多种峰值、前沿和半宽的高宽核电磁脉冲模拟波形的数值拟合。     

桑白皮中21种无机元素的测定及其质量评价

为准确了解不同产区桑白皮中多种元素分布及含量情况,用65%硝酸溶液对其样品进行微波消解处理,后采用电感耦合等离子体质谱（ICP-MS/MS）法测定桑白皮样品中21种元素的含量。得到21种元素的线性关系良好,R2 > 0.999,方法学考察试验的RSD均小于3%,加样回收率在91.32%~108.84%之间,RSD均小于4%;Al、Ga、Sr、Ba相比而言含量较大,且不同产区的特异性较明显;主成分分析中17批样品得到4个主成分,累计方差贡献率达 87.380%,确定V、Co、Al、Li、As、Se、Pb、U、Zn、Cr、Cd、Ga、Ba、Cs、Ni等15种元素为桑白皮药材的特征元素;相关性分析可知,元素间的相关性较强, P≤0.05的元素与主成分分析的特征元素基本一致。参照2020年版《中国药典》中对中药材中有害元素的限量规定,发现桑白皮样品中Pb、Cd、As、Cu有害元素的含量均未超过限量要求。ICP-MS/MS能准确快速测定桑白皮中21种元素含量情况,这对评价不同产区桑白皮质量,完善桑白皮质量标准具有一定参考价值。