三维内肋管内插入螺旋扭带的强化传热实验

本文分别以水和乙二醇为工质，在Ｒｅ数范围为：６００～４００００，Ｐｒ数范围为：５．５～１１０之间，对四根分别插入三种不同扭率螺旋扭带的三维内助管内的换热和流阻特性进行了实验研究。结果表明：三维内肋管内加装扭带的强化传热技术适用于低Ｒｅ数下高Ｐｒ数工质的管内对流换热强化。根据实验值得到了流阻和换热关联式。     

Parabolic Harnack inequality for divergence form second order differential operators

Old and recent results concerning Harnack inequalities for divergence form operators are reviewed. In particular, the characterization of the parabolic Harnack principle by simple geometric properties -Poincaré inequality and doubling property- is discussed at length. It is shown that these two properties suffice to apply Moser's iterative technique.     

Thermal conductivity of poly(vinyl chloride)/polycaprolactone blends

Thermal diffusivity, heat capacity, and density of polyvinyl chloride/polycaprolactone (PVC/PCL) blends were measured by the laser flash method, DSC, and pycnometry, respectively. The thermal conductivity of the PVC/PCL blends was determined from the results. The miscibility of the blend and crystallinity of PCL were determined by DSC. The effect of blend structure on thermal conductivity is discussed. The phase compositions of the PVC/PCL blends are of three types depending on PCL content: i.e., up to 33%, from 33 to 70%, and above 70% PCL by weight. Thermal conductivity, thermal diffusivity, and heat capacity of the PVC/PCL blends are strongly affected by the phase composition of the blend, which changes in a complicated way with PCL content. © 1994 John Wiley & Sons, Inc.     

Towards understanding the increase in strength of thermotropic polyesters with heat treatment

Thermotropic copolyester fibers of oxynaphthoate and oxybenzoate have been subjected to conditions that promote solid-state polymerization as well as annealing. The annealing process causes the crystals to perfect with a simultaneous increase in heat of fusion and melting temperature. Solid-state polymerization, a reaction rate-controlled process, causes the polymer viscosity average molecular weight to increase by chain extension from about 14,000 g/mole to more than 87,000 g/mole with a simultaneous impressive increase in tenacity from about 10 g/d (1.2 GPa) to almost 30 g/d (3.7 GPa). To understand the changes in mechanical properties, we have modeled the fiber structure as short rod-like molecules poorly bonded to a continuous matrix of parallel molecules. Lengthening of the reinforcing molecules facilitates better transfer of load from matrix to molecules, resulting in higher tenacity fibers. © 1994 John Wiley & Sons, Inc.     

Application of heat flow calorimetry to the study of oilwell cements

The majority of previous studies of the hydration of cements using heat flow calorimetry have been carried out isothermally. However, with oilwell cements the slurry is mixed on the surface at ambient temperature and then gradually increases in temperature as it is pumped down the well. A Setaram C-80 calorimeter has been used to simulate the temperature ramp in API oilwell cement test schedules. This approach has enabled cementing reactions to be studied for the first time under conditions approaching those encountered in the field, and has shown that the results obtained from isothermal experiments may be misleading.The permission of the British Petroleum Company PLC to publish this paper is gratefully acknowledged.     

Account for Energy Accommodation in Calculating the Heat Transfer between Coaxial Cylinders

A dependence of the heat transfer between coaxial cylinders on the energy accommodation coefficient is obtained. The known methods of solving a kinetic equation are compared.     

Nonlinear Diffusion Processes

We study elliptic systems of strongly nonlinear first-order differential equations in complex form on the plane. For such systems we develop the theory of Hilbert boundary value problems which is very much similar to the well-known theory for a holomorphic vector. Systems of nonlinear elliptic equations describe problems of interaction of several nonlinear stationary processes in the diffusive and convective mass and heat transport by hydrodynamic fluid flows.     

A novel method for automated grid generation of ice shapes for local‐flow analysis

Modelling a complex geometry, such as ice roughness, plays a key role for the computational flow analysis over rough surfaces. This paper presents two enhancement ideas in modelling roughness geometry for local flow analysis over an aerodynamic surface. The first enhancement is use of the leading‐edge region of an airfoil as a perturbation to the parabola surface. The reasons for using a parabola as the base geometry are: it resembles the airfoil leading edge in the vicinity of its apex and it allows the use of a lower apparent Reynolds number. The second enhancement makes use of the Fourier analysis for modelling complex ice roughness on the leading edge of airfoils. This method of modelling provides an analytical expression, which describes the roughness geometry and the corresponding derivatives. The factors affecting the performance of the Fourier analysis were also investigated. It was shown that the number of sine–cosine terms and the number of control points are of importance. Finally, these enhancements are incorporated into an automated grid generation method over the airfoil ice accretion surface. The validations for both enhancements demonstrate that they can improve the current capability of grid generation and computational flow field analysis around airfoils with ice roughness. Copyright © 2004 John Wiley & Sons, Ltd.     

Heat Kernel Asymptotics of Zaremba Boundary Value Problem

The Zaremba boundary-value problem is a boundary value problem for Laplace-type second-order partial differential operators acting on smooth sections of a vector bundle over a smooth compact Riemannian manifold with smooth boundary but with discontinuous boundary conditions, which include Dirichlet boundary conditions on one part of the boundary and Neumann boundary conditions on another part of the boundary. We study the heat kernel asymptotics of Zaremba boundary value problem. The construction of the asymptotic solution of the heat equation is described in detail and the heat kernel is computed explicitly in the leading approximation. Some of the first nontrivial coefficients of the heat kernel asymptotic expansion are computed explicitly. This revised version was published online in July 2006 with corrections to the Cover Date.     

Dynamics of Random One-Dimensional ±J Systems

Finite chains of a two-state random Potts spin model with periodic boundary conditions are studied within Glauber dynamics. The spin exchange is assumed random with frustration between ferro and antiferromagnetic values (±J). Time-dependent fluctuations are induced by periodic temperature oscillations. Master type differential equations for spin correlation functions are solved within linear response theory. The spectrum of relaxation times are calculated at different temperatures. The ±J Potts glass chains undergo a zero temperature phase transition. The barriers against inversion of the spin chain take only two values; 0 and 2|J|. The temperature behaviour of specific heat is characterized by rounded peaks. The frequency dependence displays two plateaus for the real part of specific heat and two corresponding peaks for the imaginary part. The dynamic specific heat is not affected by the longest relaxing mode like susceptibility. The time separation of the modes is demonstrated by the Cole-Cole plots.