Development and validation of a stability-indicating HPLC method for the determination of degradation products in dipyridamole injection

Summary The development and subsequent validation of an isocratic high-performance liquid chromatographic (HPLC) procedure employing ultraviolet (UV) detection for the determination of degradation products in Dipyridamole Injection is reported. The development of this assay involved the evaluation of several factors including buffer type, ionic strength, pH, organic composition, and column type. The described method is simple, reproducible, accurate, and selective. The precision, relative standard deviation (RSD), amongst five sample preparations for total degradation products was not more than (NMT) 10.2 %, while the individual degradation products were NMT 12.1%. Intermediate precision, as determined from fifteen sample preparations, generated by two Analysts on different HPLC systems over three days, exhibited an RSD for total and individual degradation products of 8.2 % and NMT 27.5 %, respectively. The mean absolute recovery of dipyridamole using the described method is 102.1±1. 9%, (mean±SD, n=12) over the concentration range of 0.03 % to 5.0 % of its label claim of 5 mg mL⁻¹. The limit of detection and limit of quantitation were 0.1 and 0.3 μg mL⁻¹, respectively. The linearity of the peak response was verified with respect to dipyridamole concentration over a range of 0.3 and 50 μg mL⁻¹ (0.03 % to 5.0 % label claim). The Standard and Assay Preparations are stable for up to 48 hours at room temperature. The selectivity was evaluated by subjecting the finished product (Dipyridamole Injection) to thermal, acidic, basic, oxidative and fluorescent radiation stress conditions. No interference in the analysis of degradation products was observed, showing the method is stability-indicating.     

Synthesis of (+)-goniothalesdiol and (+)-7-epi-goniothalesdiol

A total synthesis of (+)-goniothalesdiol, a 3,4-dihydroxy-2,5-disubstituted tetrahydrofuran isolated from Goniothalamus borneensis (Annonaceae), and its 7-epimer is reported using oxycarbonylation methodology for construction of polyhydroxylated substituted heterocycles. Diastereoselectivity of addition of organometallic reagents to 2,3-O-isopropylidene-d-threose derivatives using theoretical calculations based on the semiempirical PM5 was studied.     

QuEChERS/超高效液相色谱-串联质谱法同时测定水产品中四溴双酚A与六溴环十二烷

建立了同时测定水产品中四溴双酚A(TBBPA)和六溴环十二烷(HBCD)的超高效液相色谱-串联质谱方法。样品前处理采用QuEChERS方法,均质生物样品用水分散后加乙腈提取,经C_(18)分散固相萃取净化。采用CORTECS~?C_(18)色谱柱(4.6 mm×100 mm×2.7μm)分离,以甲醇-水为流动相进行梯度洗脱,流速为0.7 mL/min。采用电喷雾离子源,在负离子模式下以多反应监测(MRM)方式检测。结果表明,TBBPA和3种HBCD单体在0.5～500μg/L范围内线性良好,相关系数(r)大于0.998,检出限(LOD,S/N=3)和定量下限(LOQ,S/N=10)分别为0.04～0.16μg/kg和0.12～0.55μg/kg。在5、20、50μg/kg加标水平下的平均回收率为74.0%～121%,相对标准偏差(RSD)为0.20%～23%。该方法操作简单、快速、重现性好,适用于水产品中TBBPA和HBCD的快速检测。     

Assigning the C-15 configuration of 15-hydroxy-, 15-methoxy-, 15-ethoxy-hexahydrofurofuran neoclerodane diterpenoids

Examination of ¹H and ¹³C NMR spectra allows the establishment of rules for assigning the correct configuration at C-15 of 15-hydroxy-, 15-methoxy-, 15-ethoxy-hexahydrofurofuran neoclerodane diterpenoids. The structure of several diterpenoids has been assigned or ammended.     

Glass and polymeric membrane electrodes for the measurement of pH in milk and cheese

While there is a considerable interest in the food industry in determining various analytes using ion-selective electrodes (ISEs), only few reports describe their use for direct measurements in food. In this study, the suitability of glass electrodes and ionophore-based solvent polymeric ISEs for the determination of pH in Process cheese, Cheddar cheese and milk was investigated. The liquid junction potential between a 3 M KCl bridge electrolyte and diluted as well as undiluted Process cheese was found to be negligible. Reference electrodes with ceramic plug and sleeve-type junctions performed well, although precautions needed to be taken to prevent plugging at the junctions. While the protein rennet casein posed no problems in pH measurements, the extraction of neutral lipophilic compounds or hydrophobic peptides into solvent polymeric membranes was evident, resulting in some loss of selectivity for monovalent cations upon exposure to cheese. However, it was found that ISEs based on tridodecylamine (R₃N) as ionophore and o-nitrophenyl octyl ether (oNPOE) as plasticizer can be used to accurately measure the pH of milk and, after desensitization of the electrodes in a cheese emulsion, of diluted Process cheese. Since pH measurements with a glass electrode showed that emulsions of cheese moderately diluted to a cheese content of 70% have the same pH as undiluted cheeses, it is possible to determine the pH in cheese with ionophore-based ISEs. R₃N membranes also performed well in undiluted milk.     

Separation of phytosterol oxidation products by combination of different polarity gas chromatography capillary columns

The number of characterized phytosterol oxidation products (POPs) from both ring- and side-chain structures has increased during recent decades, resulting in difficulties in the separation of POPs on different gas chromatography (GC) capillary columns. The main objective of this study was to separate a mixture of 29 purified and characterized oxidation products from sito-, campe- and stigmasterol using GC capillary columns with different polarity. For the first time in the area of POPs analysis, the separation efficiency of the combination of two capillary GC columns with different polarities was investigated. A non-polar 5% phenyl coated (DB5-MS) and a mid-polar 35% phenyl coated (DB35-MS) column was combined with a pressfit connector. The main improvement was enhanced base line separation for many of the analyzed POPs, compared with the separations achieved using the individual columns. However, three pairs of POPs co-eluted: 24-hydroxysitosterol/campesterol-5beta,6beta-epoxide, stigmasterol-5beta,6beta-epoxide/campesterol-5alpha,6alpha-epoxide and stigmasterol-5alpha,6alpha-epoxide/campestanetriol.     

Actin-binding marine macrolides: total synthesis and biological importance

Marine organisms produce a fascinating range of structurally diverse secondary metabolites, which often possess unusual and sometimes unexpected biological activities. This structural diversity makes these marine natural products excellent molecular probes for the investigation of biochemical pathways. Recently, a number of novel and stereochemically complex macrolides, having a large macrolactone (22- to 44-membered) ring, that interact with the actin cycloskeleton have been isolated from different marine sources. Actin, like tubulin, is a major component of the cytoskeleton and has important cellular functions. Although the details of these interactions are still under investigation, these marine macrolides are becoming increasingly important as novel molecular probes to help elucidate the cellular functions of actin. Owing to their potent antitumor activities, these compounds, for example the aplyronines, also have potential for preclinical development in cancer chemotherapy. Their appealing molecular structures, with an abundance of stereochemistry, and biological significance, coupled with the extremely limited availability from the marine sources, have stimulated enormous interest in the synthesis of these compounds. This review summarizes the biological properties of these unusual marine natural products and features the recently completed total syntheses of swinholide A, scytophycin C, aplyronine A, mycalolide A--all of these being potent cytotoxic agents that target actin--and a diastereoisomer of ulapualide A. Rather than detailing each individual step of these multistep total syntheses, the different synthetic strategies, key reactions, and methods adopted for controlling the stereochemistry are compared.     

The furan approach to oxacycles. Part 5: Synthesis of a chiral butenolide, building block towards biologically interesting natural products

We describe an efficient new approach for the synthesis of a chiral butenolide that is based on the oxidation of a chiral furan ring with singlet oxygen in the presence of Hünig’s base, followed by Luche reduction and in situ lactonization.     

The use of glass capillary columns for the analysis of polar natural products

Two published procedures for glass capillary column production are applied to produce capillaries for chromatography of polar natural compounds. Soda lime glass capillaries, after leaching with aqueous HCL, are either treated with colloidal silicic acid or with barium carbonate and coated with either Silar 7CP or SE 52. A test mixture as well as polar carbohydrate and peptide mixtures are chromatographed on the different columns and their chromatographic properties are evaluated. Combined capillary gas chromatography-electron impact and chemical ionization mass spectrometry are used for identification of the peptide sequence.     

The use of TG-FTIR technique for the assessment of hydrogen bromide emissions in the combustion of BFRs

The TG-FTIR technique was used in the present study to investigate the thermal degradation behaviour of materials containing brominated flame retardants under fire conditions. Time-temperature profiles and oxygen concentrations typical of selected fire scenarios were reproduced in the thermogravimetric analyzer, while the characterization of the gaseous products generated was performed by the simultaneous FTIR analysis. FTIR analysis combined with the use of specific calibration procedures allowed the quantitative estimation of the gaseous products evolved as a function of experimental conditions. The results obtained allowed the straightforward assessment and the comparison of the quantities of hydrogen bromide formed in the oxidation and thermal degradation of pure brominated flame retardants and of flame retarded materials of industrial interest. Hydrogen bromide yields resulted dependent on the experimental conditions used, such as oxygen concentration and heating rate. Although TG-FTIR experiments only provide a representation of the actual heterogeneous combustion products in real fire conditions, the coupled TG-FTIR technique proved to be a straightforward experimental methodology allowing one to obtain reference data on the nature and quantities of the macropollutants generated in a fire. This revised version was published online in July 2006 with corrections to the Cover Date.