Orthokinetic Aggregation in Two Dimensions of Monodisperse and Bidisperse Colloidal Systems

Orthokinetic aggregation of colloids trapped at the air–liquid interface was studied by direct imaging in a couette cell. This method allowed us to follow the temporal evolution of both the cluster-mass distribution and the cluster structure at a shear rate where Brownian aggregation is suppressed. The interactions between the monodisperse latex particles floating at the air–liquid interface were controlled either by varying the electrolyte concentration or by creating a bidisperse system through the addition of small particles. The results show that the clusters in all of the systems are characterized by a high fractal dimension, indicating that the clusters are rearranged and densified by the shear. Kinetic analysis suggests that aggregation of monodisperse systems mainly proceeds through homogeneous aggregation, i.e., large clusters sticking to other large clusters. The bidisperse system, finally, with a size ratio around 10, favored a more heterogeneous aggregation among small and large clusters throughout the aggregation process; a slightly lower fractal dimension was observed compared to the strongly aggregated monodisperse system.     

Conductance study of ammonium complexes with several crown ethers and cryptands in nitrobenzene,acetonitrile and dimethylformamide solutions

The formation of ammonium complexes with several crown ethers and cryptands in nitrobenzene, acetonitrile and dimethylformamide solutions was investigated by conductometry at 25°C. Stability constants of the resulting 1:1 complexes sere determined from the molar conductance-mole ratio data and found to vary in the order DC18C6>18C6>DB30C10>DB21C7>DB24C8>DB18C6>15C5>B15C5>12C4, in the case of crown complexes, and in the order C222>C221>C211>C22>C21 for the ammonium cryptates. The stabilities of the complexes varied inversely with the Gutmann donicity of the solvents. Influences of the number of members in the macrocycle, nature of the substituents in the polyether ring, cavity size and dimensionality, conformations of the free and complexed ligands and number of N⁺–H bonds available for hydrogen bonding are discussed.     

Novel reaction systems for the synthesis of O-glucosides by enzymatic reverse hydrolysis

Our studies are presented to replace alcohols as solvents in reverse hydrolytic reactions catalyzed by immobilized β-glucosidase to synthesize O-substituted β-d-glucopyranosides in preparative-scale. We found that 1,2-diacetoxyethane is a suitable solvent and O-alkyl or aryl β-d-glucosides were synthesized in moderate yields (after isolation 12-19%). In these reactions proportion of glucose and glucosyl acceptor hydroxy compounds was 1:20. We suggest that 1,2-diacetoxyethane can be useful not only for alcohols but for other glucosyl donor compounds unsuitable for the role of solvent (e.g., phenols) in the synthesis of O-β-d-glucosides by reverse hydrolysis.     

Hydrolysis of new phthalimide-derived esters catalyzed by immobilized lipase

The last step of the production of four phthalimide-derived acids, designed to act as antiasthma drugs, was performed by enzymatic hydrolysis of the respective methyl or ethyl esters. The esters 4-ethyl-[2-(1,3-dioxo-1,3-dihydro-2-isoindoylyl)]-phenoxyacetic methyl ester (PHT-MET), 4-ethyl-[2-(1,3-dioxo-1,3-dihydro-2-isoindoylyl)]-phenoxyacetic ethyl ester, 4-(1,3-dioxo-1,3-dihydro-2-isoindoylyl)-phenoxyacetic ethyl ester, and 2-(1,3-dioxo-1, 3-dihydro-2-isoindoylyl)-phenoxyacetic ethyl ester were hydrolyzed by immobilized lipase. The enzymatic reaction could be used only to produce the desired 4-substituted compounds. The best result that was found to hydrolysis of PHT-MET, and, therefore, that ester was selected for optimization experiments in a three-phase system. Reactions were performed with solid biocatalyst (Lipozyme® RM IM), organic solvent phase (ethyl acetate), and aqueous phase (saturated Na₂CO₃ solution). To optimize the reaction conditions, an experimental design optimization procedure was used. The variables studied were the amount of enzyme, the temperature, and the volume of the aqueous solution. Time course experiments were then performed for different initial enzyme concentrations (0.5, 0.9, and 1.4 U_H/mL of solvent). The optimized reaction conditions found were 20 mg of Lipozyme (0.9 U_H/mL_solvent) and 5.0 mL of Na₂CO_3(sat) at 40°C for 6 h.     

3—Mercaptopropionic Acid Capped Gold Nanoclusters：Quantized Capacitance in Aquesous Media

3-Mercaptopropionic acid monolayer protected gold nanoclusters (MPA-MPCs) were synthesized and characterized by transmission electorn microscopy,UV-Vis spectroscopy,X-ray photoelectron spectroscopy and Fourler transform infrared spectroscopy.The exact value of quantized double-layer capacitance of MPCs in aqueous media was obtained by differential pulse voltammograms.     

Application of fractal geometry for studies of heterogeneity properties of nanomaterials

Calculations based on the fractal geometry in the estimation of surface heterogeneity are superior compared with conventional calculation methods (e.g. from the data of gas adsorption or X-ray radiation scattering) as they can be applied without limitation as far as the range of surface sizes of the studied structures is concerned. This paper presents structural characteristics of carbon and carbon- free nanomaterials based on the determined surface and volumetric fractal coefficients. Fractal coefficients were determined from the data obtained by means of two independent methods: sorptometry and atomic force microscopy (AFM). Correlation between porosity parameters and fractal coefficients is presented.     

The Electrochemically Initiated Reaction of Sulfide with N,N‐Diethyl‐p‐phenylenediamine in Dimethylformamide. Part II: Implications for Sensing Strategies

The electrochemically initiated reaction of p‐phenylenediamines with sulfide in aqueous media is well documented. We now report the adaptation of this chemistry into nonaqueous media. This is critically appraised as a means of detecting sulfide. The electrochemically initiated reaction of N,N‐diethyl‐p‐phenylenediamine with sulfide is shown at both macro‐ and platinum microdisk electrodes with quantitative detection of sulfide produced by means of the enhanced currents observed upon its addition. The linear detection range for sulfide is dependent on the concentration of N,N‐diethyl‐p‐phenylenediamine present with a linear range from 28–3290 μM and a limit of detection of 22 μM achievable. This represents a large increase compared to that found previously in aqueous media and offers the prospect of more ready applications in high temperature systems.     

Electroanalytical sensors for nonconducting media based on electrodes supported on perfluorinated ion-exchange membranes

Electroanalytical sensors, suitable for the analysis and monitoring of electroactive analytes present in gaseous phase or low-conductive liquid media, and based on electrodes in close contact with perfluorinated ion-exchange polymers are reviewed. The basic operative mechanism of these sensors, in which ion-exchange polymers act as solid polymer electrolytes (SPE's), is thoroughly discussed, while stressing the fundamental reasons why their behavior differs from that of conventional membrane electrodes. The procedures for preparing composite working electrodes by coating one side of ion-exchange membranes with stable porous films of conductive materials are described, along with the most common strategies followed to assemble this type of sensors. Useful examples of measurements in electrolyte-free media of inorganic and organic electroactive species of interest mainly for environmental analysis are given. Future prospects for the development of these sensors are also discussed.     

Indium Mediated Conjugate Addition of Allyl Bromide to Nitroalkenes in DMF—H2O Media

Allylindium bromide prepared by metallic indium and allyl bromide was added to nitroalkenes to give conjugate addition compounds in moderate to good yields in an aqueous media.     

Monte—Carlo model of the diffusion-limited reaction kinetics in microheterogeneous media. Comparison with the experimental plots of the forward and backward electron phototransfer kinetics on the pore diameter in silica gel

The kinetics of the diffusion-limited decay reaction A + B B was simulated by the Monte—Carlo method on a two-dimensional square lattice with defects presented by randomly distributed sites. The cases were considered where [B] [A] at the random initial distribution (quenching reaction) and [B] = [A] with the initial distribution of the A and B particles on neighboring sites (geminate recombination). The kinetic curves were approximated by the simplest analytical equation [A]/[A]₀ = (1 – )exp[–(kt)^1–h ] + (where k and are constants). The plots of the heterogeneity parameter (h) and time-averaged first-order rate constant vs. concentration of defects (p) or B particles (in the case of quenching) were obtained and compared with similar correlations obtained earlier by the experimental study of the kinetics of forward (quenching reaction) and backward (geminate recombination) electron phototransfer on the surface of different porous silica gels. The experimental plots of h vs. silica gel porosity are in satisfactory agreement with the plots of h vs. p in the model space, if the fraction of volume inaccessible for reactants, calculated from the free silica gel volume, is chosen as the p parameter for silica gel.Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1536–1541, August, 2004.